• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.230-233
• /
• 2008

The vanadium rich ash of petroleum coke can give a slagging problem during because of the high melting point of $V_2O_3$. For continuous removal of the slag, petroleum coke is often mixed with coal, and the viscosity of the mixed slag is an important property, determining the gasification temperature. The viscosities of the mixed slag from various mixing ratios of petroleum coke and a bituminous coal were investigated. When mixed with a crystalline coal slag, $T_{cv}$ was increased at a higher the coke content in the mixed feed. When the $V_2O_3$ concentration was greater than 4.5%, it was difficult to get accurate measurements of $T_{cv}$. The SEM/EDX analyses of the cooled slag revealed that the major crystalline phase was anorthite, and $T_{cv}$ should be related to the formation temperature of anorthite. The SEM/EDX analyses also showed that, at low concentrations of vanadium, part vanadium formed a crystalline phase with Al-Si-Ca-Fe, and the rest remained in the glassy phase, suggesting that vanadium existed as a slag component at the low viscosity region. At a high concentration, vanadium forms a phase with Ca, and the Ca-V phase was separated from the slag phase, and formed a layer above the slag. FeO in petroleum coke also played an important role determining viscosity: at high temperatures, increased FeO lowered the viscosity, but as it formed a spinel phase, the depletion of FeO in the slag resulted in a higher viscosity.

• Korean Journal of Crystallography
• /
• v.1 no.1
• /
• pp.49-56
• /
• 1990

The crystallizied Inactions of the two metastable phases in the glasses of plagioclase compositions were estimated by x-ray diffraction method. The orthorhombic metastable phase is easily drystaliized in the composition range of 70 to 80 mol% of albite, whereas the hexagonal metastable phase is mostly crystallized in the anonhite-rich side. For the purpose of refining the orthorhombic metastable structure some single crystal fragments of the composition Na,17ca‥‥All Isi2 nn were separated Som the crystallized glasses. The cell parameters of this crystal are a=8.237(1)A. b=8.644(1)A c=4.818(1)A. The space group of this crystal is Pn,2, Final atomic coordinates give R value of 0.040 and Rw of 0.028 with anisotropic thermal parameters. The position of Na and Ca atoms statistically distributed is splitted in two points with the occupancy of 0.5. The Si and Al atoms are statistically distributed in the six-membered ring of the Immm-type framework.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.6
• /
• pp.378-382
• /
• 2004

Soil pH is an important indicator for soil reactions and crop growth. pH buffer capacity and lime requirements are necessary to comprehend and manage soils well. The characteristics related with soil pH were analyzed and 5 field trials were conducted to elucidate pH buffer capacity of soil and lime requirements and liming factor for Korean acid soils. Soil minerals were analyzed for the soil of 2 years after treating $CaCO_3$ using X-ray diffraction. The amount of neutralized $H^+$ was regarded as the exchangeable aluminium overcoming ${\Delta}pH$, because pH buffer capacity of soil depended on exchangeable aluminium. Lime requirement was somewhat similar to the KCl exchangeable aluminium and it was also affected by the exchangeable cation by added lime. X-ray diffraction analyses revealed that an aluminium dissociation from Korean acid soils was equilibrated with kaolin minerals and changed into anorthite ($CaAl_2Si_2O_8$) by neutralizing with $CaCO_3$. Neutralizing process was composed of changing process of $Al^{3+}$ into $H^+$ and $Al(OH)_4{^-}$ ionic species and of neutralizing $H^+$ by, the amount of which was lime requirement. The fact that anorthite dissociates an aluminium ion higher than kaolinite does enabled to consider a liming factor (LF) the content of exchangeable cation and ${\Delta}pH$, $LF=1.5+0.2{\times}{\sum} Cations{\times}{\Delta}pH$.

• Economic and Environmental Geology
• /
• v.17 no.4
• /
• pp.283-288
• /
• 1984

Projection method has been used in the phase equilibria study. The projection is made through the saturated phase on the smaller chemical system from larger system. This decreases the number of phases which are included in the larger chemical system. In multiple projection containing plagioclase as a projection phase, there is a difference in matrix calculation when plagioclase is treated as a single composite component and separately as an albite and anorthite. The matrix calculation is considered to be more usable and easier in multiple projection. The value of the A component in the AFM system, which is the smaller system projected from the larger one, is effected and varies according to the change in the An content in plagioclase that is examined as an example.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.4
• /
• pp.63-70
• /
• 2011

Anorthite forming glass frits in amounts up to 25 vol% of the silver powder were added to improve the adhesion between the conductor pattern formed by thick film photoimageable process and the low temperature co-fired ceramics (LTCC) substrate. The sheet resistance of the conductor pattern was raised from 0.13 ${\Omega}/{\square}$ to 2.25 ${\Omega}/{\square}$ as the volume percentage of glass frit increased up to 25 vol%. The adhesion strength was improved with this glass frit increase, but it decreased when the glass content exceeded 20 vol% which are possibly attributed to the liquid pool effect and the reduced fracture toughness in the interface between conductor and LTCC layer. The shrinkage of the width of the conductor pattern decreased with the addition of glass contents.

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1545-1551
• /
• 1994

Various kinetic parameters of the nucleation and crystallization in anorthite glass (CaO.Al2O3.2SiO2) were calculated by nonisothermal differential thermal analysis. Base glass and glass with TiO2 were prepared by melting. In base glass, the temperature where nucleation can occur ranges from 85$0^{\circ}C$ to 9$25^{\circ}C$ and the temperature for maximum nucleation was 900$\pm$5$^{\circ}C$. In glass with TiO2, the nucleation temperature range was 800~875$^{\circ}C$ and the maximum nucleation temperature was 850$\pm$5$^{\circ}C$. Kissinger equation, Bansal equation, and modified Ozawa equation were used for calculating activation energy for crystallization, Ec. The results showed the same activation energies for both glasses with and without TiO2 in the different equations. The shape of maximum exotherm peak and Ozawa equation were used for Avrami exponent, n. The n value for each glass was 2, indicating that each glass crystallized primarily by bulk crystallization.

• Journal of the Korean Ceramic Society
• /
• v.17 no.3
• /
• pp.151-157
• /
• 1980

Crystallization phenomena of glasses of fused natural basalt rocks were studied by DTA, X-ray phase analysis, electron microscopy, and other techniques. Crystallization was catalyzed by the addition of either chromite ore or $P_2O_5$, both up to 5 wt %. Various heat treatments were used, and their influences on controlling the microstructures and properties of the products were studied to develop high strength glass-ceramic material of the $CaO-Al_2O_3(Fe_2O_3)-MgO(FeO)-SiO_2$ system from the domestic basalts. Magnetite precipitates were found to be a nucleation initiator in every case of the crystallization. Diopside, anorthite, clinoenstatite and monticellite were identified as silicate crystalline phases contained in the crystallized products. The crystallite size was in the range of 0.1-2.5$\mu\textrm{m}$. The fine crystallites were approximately cubic, but large crystallites were either plate or needle shape. The thermal expansion coefficient, microhardness and modulus of rupture of glass-ceramics were ranged from 78.5 to 81.8$\times$10-7 cm/cm/$^{\circ}C$, from 820 to 930kg/$\textrm{mm}^2$, and from 1800 to 2800kg/$\textrm{cm}^2$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.42 no.11 s.282
• /
• pp.753-757
• /
• 2005

In this study, we attempted to recycle the fly ash as a mullite whisker with addition of $Al_{2}O_{3}$ to obtain the high yield of mullite whisker. During the reaction process, mullite whisker was formed with the reaction of amorphous $\alpha$-Cristobalite and Anorthite above $1350^{\circ}C$. With increasing the heat treatment temperature and time, the mean length and aspect ratio of mullite whiskers was gradually increased.

• Journal of the Korean Ceramic Society
• /
• v.14 no.1
• /
• pp.12-18
• /
• 1977

In our former paper, tremolitic talc, -wollastonite-clay system was studied. In this study blast furnace slag was used(B.F.S.) instead of wollastonite for developing a fast-firing wall tile body. The wall tile bodies consisting of tremolitic talc and B.F.S. asmajor constituents have been fired in the temperature range 1000-120$0^{\circ}C$. Some of these bodies have showed good properties for wall tile manufacture. According to the increased content of B.F.S the fired bodies have showed the decreased thermal expansion which was resulted from the fact that the amounts of diopside and anorthite were gradually increased and those of quartz relatively decreased. Being reasonable in low price and thermo-stable properties tremolitic talc and B.F.S. will be good materials for the fast-firing tile body.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.61-61
• /
• 2008

이동 통신의 급격한 발전에 따라 이동통신 기기의 부품들이 소형화되고 다양한 기능이 요구되어지고 있다. 이동 통신용 부품은 패턴의 미세화와 비아 수의 증가 등 고집적화로 인한 강도 요구로 LTCC 소재의 사용이 증가되고 있다. 또한 glass의 조성이 결정상 생성 및 복합체의 미세 구조에 영향을 미칠 것으로 기대되지만 유리의 조성에 관한 연구는 아직 미비하다. 본 연구에서는, anorthite를 생성시키는 LTCC composite용 glass에서 융점 및 Tg에 영향을 주는 것으로 알려진 B와 Zn의 양을 변화시키고 2가 금속(Mg, Sr, Ba)원소를 첨가함에 따라 compostite에서 아노사이트 상을 비롯한 결정상의 생성과 이에 따른 미세구조의 변화를 살펴 보았다. 조성변화에 따라 제조된 glass는 Tg를 측정하고, 제조된 glass를 $Al_2O_3$ filler와 혼합하여 tape casting 공정으로 시트를 제작하였다. 제조된 시트를 소결한 후에, 강도, 유전 특성, 밀도를 측정하였다. 소결체는 미세구조와 상분석을 통해 LTCC 소재와 글래스 조성과의 상관관계를 확인하고자 하였다.