• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6C
• /
• pp.619-625
• /
• 2009

This paper proposes a parallel architecture of a Parity Checksum Generator adopted for packet synchronization and error detection in the ITU-T Recommendation J.83 Annex B. The proposed parallel processing architecture removes a performance bottleneck occurred in a conventional serial processing architecture, leading to significant decrease in processing time for generating a Parity Checksum. The implementation results show that the proposed parallel processing architecture reduces the processing time by 83.1% at the expense of 16% area increase.

• Steel and Composite Structures
• /
• v.6 no.2
• /
• pp.139-157
• /
• 2006

In this paper, a cyclic mechanical model is presented to simulate the behaviour of top and seat with web angle beam-to-column connections. The introduced mechanical model is compared with Eurocode 3 Annex J, its extension, and with experimental data. To have a better insight regarding the actual response of the joints, available results of the experiments, carried out on full-scale top and seat angle joints under monotonic and cyclic loading, are first considered. Subsequently, a finite element model of the test setup is developed. The application of the proposed model, its comparisons with the experimental curves and with the Eurocode 3 Annex J and with its modification, clearly show the excellent quality of the model proposed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.286-294
• /
• 2011

Cable modems typically are implemented by a forward error correction(FEC) scheme. The ITU-T Recommendation J-38 Annex B specifies using 64- and 256- quadrature amplitude modulation (QAM) and extended RS coding scheme. In implementing the cable modem, there are some problems to fabricate and fitting on FPGA chip. First, many clocks are needed in implementing cable modem because of different code rate and different modulation types. To reduce the number of clocks, we use the two memories, which are different clock speed for reading and writing data. Second, this system lost the bit-synchronization and frame-synchronization in decoder, the system recognize that all data is error. This paper solves the problems by using simple 5-stage registers and unique sync-word. Based on solutions for about problems, the cable modem is fabricated on FPGA chip name as Vertex II pro xc2vp30-5 by Xilinx, and we confirmed the effectiveness of the results.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.3
• /
• pp.90-97
• /
• 2019

The International Civil Aviation Organization(ICAO) recently established the Global Aviation Safety Plan(GASP) for national aviation safety management, along with the enactment of Annex 19, Safety Management System(SMS). ICAO require the establishment of the 'States Safety Programs(SSP)' for countries with excellent safety evaluation, including Korea, and the establishment of aviation safety supervision systems for all Contracting States by 2017 under the enactment of ICAO Annex 19. Required. The Ministry of Land, Infrastructure, and Transport has continuously invested in R&D to secure such aviation safety systematically, and is making efforts to develop and disseminate related technologies by establishing long-term R&D roadmaps. A study on aviation safety supervision among the system-based aviation safety supervision support technology development R&D project, which is underway as part of the aviation safety technology development project of the Ministry of Land, Infrastructure and Transport. We conducted a study to see if this methodology logically guarantees reasonableness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.45-49
• /
• 2002

In this paper, we have studied about electromagnetic wave absorbing properties of ferrite-rubber composite with a variation of ferrite. Amounts of ferrite in a composite absorber were changed from 52 wt.% to 62 wt.%. As a result, it has been shown that the electromagnetic wave absorbing properties of ferrite-rubber composite are related to the amount of ferrite in composite absorber. As a summary, it could be controled the electromagnetic wave absorbing property of ferrite-rubber composite by changing some kinds of annex A and amount of ferrite.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.403-406
• /
• 2000

본 논문에서는 저비트율 영상통신에서 발생되는 블록화현상과 컬러 번짐 현상을 효과적으로 줄임으로써, 주관적 화질을 개선하는 후처리 필터를 제안한다. 저비트율 영상통신에서 8*8 블록 단위의 DCT 수행은 블록화 및 컬러 번짐 현상과 같은 화질 열화를 초래한다. 이러한 화질 열화를 개선하기 위하여 밝기 영역과 컬러 영역에서 각기 다른 후처리 필터를 본 논문에서 제안한다. 밝기 부분의 후처리 필터에서는 일률적인 후처리 필터에서 발생하게 되는 새로운 artifact 인 geometric pattern 을 방지하기 위해 각 화소의 공간영역에서 블록 경계 좌우로 filtering range 를 다르게 수행하고, 컬러부분의 후처리 필터에서는 컬러번짐 현상을 최대한 억제하기 위해 블록간 컬러 값의 차이에 따라 다르게 수행되는 후처리 필터를 제안한다. 제안된 실험을 통하여 후처리 필터를 수행한 영상화질이 H.263 baseline 에 비해 월등히 나아짐을 확인할 수 있었으며, H.263 Annex J의 deblocking filter mode에 비해서도 떨어지지 않는 화질을 얻을 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.227-230
• /
• 2010

본 논문은 디지털 케이불망에서 초고선명 TV(Ultra High Definition TV) 서비스를 위한 100Mbps급 1024-QAM 전송시스템 개발에 관하여 기술한다. 8K-UHD TV(해상도 7680x4320) 콘텐츠 전송을 위해서는 l개의 프로그램당 약 100-160Mbps의 대용량 데이터 전송률이 확보되어야 하며. 이러한 대용량 데이터 전송을 위해 타매체에 비해 상대적으로 전송채널 환경이 우수한 디지털 케이블망(HFC:Hybrid Fiber and Coaxial)을 이용한 대용량 실감데이터 전송기술에 대한 연구가 주목받고 있다. 본 논문에서는 이와 같은 UHD 실감콘텐즈 전송을 위하여, OpenCable(J.83 Annex B) 확장형 1024-QAM 송수신기술 및 방송망 채널본딩기법을 적용한 100Mbps급 송수신 기술개발에 대한 내용을 기술한다.

• Steel and Composite Structures
• /
• v.4 no.2
• /
• pp.77-94
• /
• 2004

Steel beam-to-column joints are often subjected to a combination of bending and axial forces. The level of axial forces in the joint may be significant, typical of pitched-roof portal frames, sway frames or frames with incomplete floors. Current specifications for steel joints do not take into account the presence of axial forces (tension and/or compression) in the joints. A single empirical limitation of 10% of the beam's plastic axial capacity is the only enforced provision in Annex J of Eurocode 3. The objective of the present paper is to describe some experimental and numerical work carried out at the University of Coimbra to try to extend the philosophy of the component method to deal with the combined action bending moment and axial force.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1803-1811
• /
• 2001

In this paper, Forward Error Correction(FEC) that is satisfied with ITU-T Recommendation J.83, Annex B(North American Data Over Cable Service Interface Specifications(DOCSIS) for Multimedia Cable Network System(MCNS)) is analyzed. The FEC consist of Reed-Solomon(RS) layer, interleaving layer, randomization layer, and trellis coded modulation(TCM) layer. The effects of quantization of input symbol and of trace-back depth in the Viterbi decoder are simulated over AWGN channels.

• Korea Trade Review
• /
• v.44 no.1
• /
• pp.129-142
• /
• 2019

This paper draws implications on the ship finance of the Korean ECAs for shipbuilding industry from the perspective of WTO ASCM through studying the trade disputes on export credits. In consideration of the underwriting practice on the case-by-case basis, the ECAs' law regimes and their ship finance programs as such would be judged not conferring a benefit. The ship finance of international commercial banks could be treated as a market benchmark for the purpose of determining the existence of benefit in the ECA ship finance. The ECAs share securities with international commercial banks for the same exposure to the risks in a syndicate. Therefore, WTO DSB would rule that the ECA ship finance confers no benefit for individual transactions. The items (j) and (k-1) of ASCM Annex I are not allowed to interpret a contrario.