• Title/Summary/Keyword: Annex 6

Search Result 70, Processing Time 0.026 seconds

A Study on the reflection ratio of ICAO Annex 6 (Operations of Aircraft) incorporated into our domestic air laws - Focused on ICAO Annex 6 Part I (International Commercial Air Transport - Aeroplanes) - (ICAO 부속서 6(항공기 운항)의 국내 항공법령 반영률에 관한 연구 - ICAO Annex 6 Part I (국제상업항공운송-항공기)을 중심으로 -)

  • Noh, Kun-Soo;Jie, Min-Seok;Kim, Woong-Yi
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.28 no.2
    • /
    • pp.97-115
    • /
    • 2013
  • The world-wide principal criteria of aircraft operations is ICAO Annex 6. Operations of Aircraft. Among ICAO Annex 6, Part I is for International Commercial Air Transport - Aeroplanes and it assumes major part of civil aviation. ICAO has been providing Contracting States with SARPs(Standards and Recommended Practices) and monitor each State's reflection degree into their domestic air law, so-called USOAP(Universal Safety Oversight Audit Program). Current ICAO USOAP is Snap-shot method, but it will be changed to USOAP-CMA method from the year of 2013. ICAO USOAP results have overall effects on national aviation industry such as routes, insurance, airlines cooperation and so forth. Low grades of results attract international attention and that leads to flag carrier's operation stoppage, route restriction, airlines cooperation restriction, insurance increase directly or indirectly. Thus it is important to get excellent grades in ICAO USOAP and to maintain confidence. Our government ranked top to get 98.89 grades in 2008 ICAO USOAP but after 2008 the revised provisions have not been reflected sufficiently into our air law. So I would like to grip reflection ratio of ICAO Annex 6 Part I into our domestic air law by using the most updated revised edition on this paper. Together I would like to suggest alternatives for the non-reflected and partially reflected.

  • PDF

Simulation Study of VHF band π/4-DQPSK Maritime Digital Communication Modem According to ITU-R M.1842-1 Annex1 (ITU-R M.1842-1 Annex1 π/4-DQPSK VHF 대역 해상 디지털 통신모뎀의 시뮬레이션 연구)

  • Kwak, Jae-Min
    • Journal of Advanced Navigation Technology
    • /
    • v.17 no.6
    • /
    • pp.693-699
    • /
    • 2013
  • In this paper, ${\pi}/4$-DQPSK modem according to ITU-R M.1842-1 recommendation Annex1 is investigated and simulated. At first, standardization and technical trend of VHF maritime mobile communication are introduced. The ${\pi}/4$-DQPSK modem defined in the Annex1 should support 28.8Kbps bit transmission rate within 25KHz frequency bandwidth. We describe the system model and simulation process of ${\pi}/4$-DQPSK modem transmitter and receiver design with RRC(Root Raised Cosine) transmitter and receiver filter. Then we suggest various graphical simulation results(time domain signals, constellation, power spectral density according to roll-off factor, eye diagram), and show simulated BER performance of the modem. From the simulation results, it is shown that roll-off factor of RRC filter affects to BER performance according to SNR and the designed simulation model meets the spectrum mask requirement suggested in ITU-R M.1842-1 recommendation.

Parallel Processing Architecture for Parity Checksum Generator Complying with ITU-T J.83 ANNEX B (ITU-T J.83 ANNEX B의 Parity Checksum Generator를 위한 병렬 처리 구조)

  • Lee, Jong-Yeop;Hong, Eon-Pyo;Har, Dong-Soo;Lim, Hai-Jeong
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.34 no.6C
    • /
    • pp.619-625
    • /
    • 2009
  • This paper proposes a parallel architecture of a Parity Checksum Generator adopted for packet synchronization and error detection in the ITU-T Recommendation J.83 Annex B. The proposed parallel processing architecture removes a performance bottleneck occurred in a conventional serial processing architecture, leading to significant decrease in processing time for generating a Parity Checksum. The implementation results show that the proposed parallel processing architecture reduces the processing time by 83.1% at the expense of 16% area increase.

Cyclic mechanical model of semirigid top and seat and double web angle connections

  • Pucinotti, Raffaele
    • Steel and Composite Structures
    • /
    • v.6 no.2
    • /
    • pp.139-157
    • /
    • 2006
  • In this paper, a cyclic mechanical model is presented to simulate the behaviour of top and seat with web angle beam-to-column connections. The introduced mechanical model is compared with Eurocode 3 Annex J, its extension, and with experimental data. To have a better insight regarding the actual response of the joints, available results of the experiments, carried out on full-scale top and seat angle joints under monotonic and cyclic loading, are first considered. Subsequently, a finite element model of the test setup is developed. The application of the proposed model, its comparisons with the experimental curves and with the Eurocode 3 Annex J and with its modification, clearly show the excellent quality of the model proposed.

Adoption of Carbon Emissions Trading and Its Prospects (탄소배출권 거래제의 도입과 전망)

  • Lee, Sun
    • Journal of the Korean Professional Engineers Association
    • /
    • v.44 no.6
    • /
    • pp.29-34
    • /
    • 2011
  • Korea has been officially classified as a non Annex-I country under the Kyoto Protocol, however, international community is used to considering it as if it were an Annex-I country. Korea has been under great pressure from the international community, especially from the EU and the US, to get included as an Annex-I country or to accept a legally-binding emissions reduction target like other developed nations. Korean Government declared its national target of emissions reduction in 2020 before the Copenhagen meeting, and also pronounced "Low-Carbon Green-Growth" as a new national paradigm to drive the entire nation toward a low carbon society and develop a new growth momentum. The 'green Act', which was passed by the National Assembly in 2009, is a comprehensive and fundamental law providing legal grounds to all of the national policies and measures that are needed to transform the nation into a low-carbon society. Korean government announced to begin Carbon Emissions Trading from 2015, instead of the originally scheduled year of 2013, considering global trends and industrial competitiveness in a flexible manner. The Carbon Emission Trading would reduce carbon emissions by 30 percent from the expected 2020 level, or 4 percent below its emissions in 2005.

  • PDF

A Study on the Legal Proposal of Crew's Fatigue Management in the Aviation Regulations (항공법규에서의 승무원 피로관리기준 도입방안에 관한 연구 - ICAO, FAA, EASA 기준을 중심으로 -)

  • Lee, Koo-Hee;Hwang, Ho-Won
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.27 no.1
    • /
    • pp.29-73
    • /
    • 2012
  • Aviation safety is the State and industry's top priority and more scientific approaches for fatigue management should be needed. There are lately various studies and regulation changes for crew fatigue management with ICAO, FAA and EASA. ICAO issued the provisions of fatigue management for flight crew since 1st edition, 1969, of Annex 6 operation of aircraft as a Standards and Recommended practice(SARPs). Unfortunately, there have been few changes and improvement to fatigue management provisions since the time they were first introduced. However the SARPs have been big changed lately. ICAO published guidance materials for development of prescriptive fatigue regulations through amendment 33A of Annex 6 Part 1 as applicable November 19th 2009. And then ICAO introduced additional amendment for using Fatigue Risk Management System (FRMS) with $35^{th}$ amendment in 2011. According to the Annex 6, the State of the operator shall establish a) regulations for flight time, flight duty period, duty period and rest period limitations and b) FRMS regulations. The Operator shall implement one of following 3 provisions a) flight time, flight duty period, duty period and rest period limitations within the prescriptive fatigue management regulations established by the State of the Operator; or b) a FRMS; or c) a combination of a) and b). U.S. FAA recently published several kinds of Advisory Circular about flightcrew fatigue. U.S. passed "Airline Safety and FAA Extension Act of 2010" into law on August 1st, 2010. This mandates all commercial air carriers to develop a FAA-acceptable Fatigue Risk Management Plan(FRMP) by October 31st, 2010. Also, on May 16, 2012, the FAA published a final rule(correction) entitled 'Flightcrew Member Duty and Rest Requirements; correction to amend its existing prescriptive regulations. The new requirements are required to implement same regulations for domestic, flag and supplemental operations from January 4, 2014. EASA introduced a Notice of Proposed Amendment (NPA) 2010-14 entitled "Draft opinion of the European Aviation Safety Agency for a Commission Regulation establishing the implementing rules on Flight and Duty Time Limitations and Rest Requirements for Commercial Air Transport with aeroplanes" on December 10, 2010. The purpose of this NPA is to develop and implement fatigue management for commercial air transport operations. Comparing with Korean and foreign regulations regarding fatigue management, the provisions of ICAO, FAA, EASA are more considering various fatigue factors and conditions. Korea regulations should be needed for some development of insufficiency points. In this thesis, I present the results of the comparative study between domestic and foreign regulations in respect of fatigue management crew member. Also, I suggest legal proposals for amendment of Korea Aviation act and Enforcement Regulations concerning fatigue management for crew members. I hope that this paper is helpful to change korea fatigue regulations, to enhance aviation safety, and to reduce the number of accidents relating to fatigue. Fatigue should be managed at all level such as regulators, experts, operators and pilots. Authority should change surveillance mind-set from regulatory auditor to expert adviser. Operators should identify various fatigue factors and consider to crew scheduling them. Crews should strongly manage both individual and duty-oriented fatigue issues.

  • PDF

PVT-GSHP System Economic Evaluation Study with IEA ECBCS Annex 54 Method (IEA ECBCS Annex 54 방법에 근거한 PVT-GSHP 시스템 경제성 평가 연구)

  • Pak, Jin-Woo;Kang, Eun-Chul;Lee, Euy-Joon
    • Journal of the Korean Solar Energy Society
    • /
    • v.34 no.1
    • /
    • pp.64-71
    • /
    • 2014
  • This study is to perform economic analysis of a PVT-GSHP (Photovoltaic Thermal-Ground Source Heat Pump) system compared to the conventional system which consists of a boiler and a chiller. This research has simulated, developed and analyzed four systems for application in a residential and an office building which was based on the hourly EPI (Energy Performance Index, $kWh/m^2yr$). Case 1 includes a boiler and a chiller to meet heating and cooling demands for a house. Case 2 is the same conventional system as Case 1 for a office. Case 3 is simple summation of Case 1 and 2. And Case 4 is utilizing a PVT-GSHP to meet the combined loads of the house and office. The economic evaluation study was based on IEA ECBCS Annex 54 subtasks C economic assessment methods. This study indicated that PVT-GSHP system can save a building's energy up to 53.9%. Also the SPB (Simple Payback) of the PVT-GSHP system with 0%, 50% initial incentive was 14.5, 6.7 year respectively.

Implementation of a G,723.1 Annex A Using a High Performance DSP (고성능 DSP를 이용한 G.723.1 Annex A 구현)

  • 최용수;강태익
    • The Journal of the Acoustical Society of Korea
    • /
    • v.21 no.7
    • /
    • pp.648-655
    • /
    • 2002
  • This paper describes implementation of a multi-channel G.723.1 Annex A (G.723.1A) focused on code optimization using a high performance general purpose Digital Signal Processor (DSP), To implement a multi-channel G.723.1A functional complexities of the ITU-T G.723.1A fixed-point C-code are measures an analyzed. Then we sort and optimize C functions in complexity order. In parallel with optimization, we verify the bit-exactness of the optimized code using the ITU-T test vectors. Using only internal memory, the optimized code can perform full-duplex 17 channel processing. In addition, we further increase the number of available channels per DSP into 22 using fast codebook search algorithms, referred to as bit -compatible optimization.

Design of a Multi-Band Network Selection System for Seamless Maritime Communication Networks (단절 없는 해상 통신 네트워크를 위한 멀티대역 네트워크선택기 시스템 설계)

  • Cho, A-ra;Yun, Changho;Lim, Yong-kon;Choi, Youngchol
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.21 no.6
    • /
    • pp.1252-1260
    • /
    • 2017
  • As digital communication technology evolves, the diversity of maritime communication methods has benn increasing due to the emergence of new maritime communication technologies such as digital very high frequency (VHF) communication systems and LTE-M as well as traditional conventional maritime communication systems. At sea, all maritime communication methods may be available, but only some communication methods may be available depending on the location. In this paper, we propose a multi-band network selection (MNS) system that can provide seamless maritime communication service by switching to an optimal communication band among available communication systems, depending on network environment and user requirements. The proposed MNS system in the middleware layer is designed to be able to interface with two types of digital VHF communication systems that satisfy Annex 1 and Annex 4 of ITU-R M. 1842-1, LTE, and high frequency (HF) communication systems. We assign priority to each communication band, and design an optimal communication band determination algorithm based on this priority.