• 제목/요약/키워드: Anna

검색결과 591건 처리시간 0.024초

Behaviour and strength of back-to-back built-up cold-formed steel unequal angle sections with intermediate stiffeners under axial compression

  • Gnana Ananthi, G. Beulah;Roy, Krishanu;Lim, James B.P.
    • Steel and Composite Structures
    • /
    • 제42권1호
    • /
    • pp.1-22
    • /
    • 2022
  • In cold-formed steel (CFS) structures, such as trusses, transmission towers and portal frames, the use of back-to-back built-up CFS unequal angle sections are becoming increasingly popular. In such an arrangement, intermediate welds or screw fasteners are required at discrete points along the length, preventing the angle sections from buckling independently. Limited research is available in the literature on axial strength of back-to-back built-up CFS unequal angle sections. The issue is addressed herein. This paper presents an experimental investigation reported by the authors on back-to-back built-up CFS unequal angle sections with intermediate stiffeners under axial compression. The load-axial shortening behaviour along with the deformed shapes at failure are reported. A nonlinear finite element (FE) model was then developed, which includes material non-linearity, geometric imperfections and modelling of intermediate fasteners. The FE model was validated against the experimental test results, which showed good agreement, both in terms of failure loads and deformed shapes at failure. The validated finite element model was then used for the purpose of a parametric study comprising 96 models to investigate the effect of longer to shorter leg ratios, stiffener provided in the longer leg, thicknesses and lengths on axial strength of back-to-back built-up CFS unequal angle sections. Four different thicknesses and seven different lengths (stub to slender columns) with three overall widths to the overall depth (B/D) ratios were investigated in the parametric study. Axial strengths obtained from the experimental tests and FE analyses were used to assess the performance of the current design guidelines as per the Direct Strength Method (DSM); obtained comparisons show that the current DSM is conservative by only 7% and 5% on average, while predicting the axial strengths of back-to-back built-up CFS unequal angle sections with and without the stiffener, respectively.

한약 관련 국가연구개발사업 분석 및 고찰 (2002-2022) (Analysis of national R&D projects related to herbal medicine (2002-2022))

  • 김안나;이승호;김영식
    • 대한한의학방제학회지
    • /
    • 제31권2호
    • /
    • pp.81-98
    • /
    • 2023
  • Objectives : This study aimed to analyze the trends in research and development projects related to herbal medicine and natural products in the field of traditional Korean medicine (TKM) over the past 20 years. Methods : Research projects were identified using "Korean medicine" as the subject heading in the National Science and Technology Information Service. The included projects investigated Korean medicine, natural products, or were related to the TKM industry. Data pre-processing and network analysis were performed using Python and Networkx package, and the network was visualized using the ForceAtlas2 visualization algorithm. Results : 1. Over the study period, 4,020 projects were conducted with a research budget of KRW 835.2 billion. Seven institutions performed over 100 projects each, accounting for 2.4% of all participating institutions, and the top 10 institutions accounted for 58.9% of total projects. 2. Obesity was the most frequently mentioned disease-related keyword. Chronic or age-related diseases such as diabetes, osteoporosis, dementia, parkinson's disease, cancer, inflammation, and asthma were also frequent research topics. Clinical research, safety, and standardization were also frequently mentioned. 3. Centrality analysis found that obesity was the only disease-related keyword identified, alongside TKM-related keywords. Standardization, safety, and clinical trials were identified as central keywords. Conclusions : The study found that research projects in TKM have focused on standardizing and ensuring the safety of herbal medicine, as well as on chronic and age-related diseases. Clinical studies aimed at verifying the effectiveness of herbal medicine were also frequent. These findings can guide future research and development in herbal medicine.

The Epistolary Novel and Samuel Richardson's Heroines: Female Writers and Readers of Letters

  • Chung, Ewha
    • 영어영문학
    • /
    • 제56권6호
    • /
    • pp.1067-1090
    • /
    • 2010
  • The epistolary novel, as developed and refined by Samuel Richardson (1689-1761), is concerned with distinctly private experience and the morality of individuals-Richardson's heroine writers. In contrast to nineteenth-century novels, which explore their subjects through the overview of a narrator with a singular moral outlook, the epistolary narrative allows Richardson to examine the various different ways in which individuals/heroines interpret, mold, and respond to their experiences in writing. In this paper, I argue that the authorial voice of Richardson does not control the narrative but rather is present in the prefaces, character sketches, notes and occasional interjections between letters. Although there is little doubt as to whether Richardson intended to make a particular moral point or attempted to control the effect of his novels on his readers, the heroines and their letters dominate the novels so that they put the authorial suggestions in a different light, reducing the author's to one voice among several. Thus, Pamela's letters are exemplary for the vigor and intelligence with which they appear to be written, rather than for the imposed morality of their ghost writer-Richardson. Although Clarissa is of a different social class from Pamela, both heroines are united in their oppression as victims of a patriarchal society. In Clarissa's letters, the heroine's situation and experience are seen through her own writing in dialogue with that of her confidante Anna Howe, and in contrast to the writing of her oppressors. Clarissa, then, becomes a struggle between different discourses in which their genesis and effect, and the societies and individuals from which they come are implicitly suggested in Richardson's text. While Richardson may or may not be guilty of taking the writing of women and using it for his own ends, his epistolary novels represent a deliberate and bold attempt to shape the novel in a way conducive to his heroines and to women writers.

어린이집 방문간호사의 직무에 대한 인식비교 (Comparative Analysis of Nurse-led Health Care in Child Daycare Centers)

  • 오원옥;임여진;박인숙;이안나;석민현
    • 한국보건간호학회지
    • /
    • 제37권1호
    • /
    • pp.25-40
    • /
    • 2023
  • Purpose: To compare perceptions of nurse-led health care visits in child daycare centers and calculate determination coefficients (DC) reflecting the job values. Methods: This was a secondary analysis study that applied the evaluation report for visiting nursing services for child daycare centers, prepared by the Seoul Nurses Association in 2021. Totally, 86 visiting nurses, 1997 childcare teachers, and 1915 parents were included in the study. The job recognition questionnaire was used to identify the levels of readiness, importance, and difficulty of a visiting nurse's job. Results: The visiting nurses showed high levels of readiness and importance for most duties and tasks expected of them. Compared to the nurses, the parents determined a greater importance towards the jobs of visiting nurses. The visiting nurses and childcare teachers exhibited similar levels of importance for the job. The highest and lowest DC scores were obtained for 'child developmental evaluation and referral' and 'child education', respectively. Conclusion: The duties and tasks verified in this study can be evidence for the job description, and should be preferentially developed for enhancing the competency of visiting nurses. Considering the importance of nurse-led health care, this will warrant an expansion of services to other regions.

Unrecorded species of Korean invertebrates discovered through the project of 'Discovery of Korean Indigenous Species' III

  • Su-Jung Ji;Jongwoo Jung;Sa Heung Kim;Dong-Ha Ahn;Min-Seop Kim;Jeounghee Lee;Hee-Min Yang;Geon Hyuk Lee;Eunjung Nam;Taeseo Park;Anna B. Jost;Huyen T. M. Pham;Jina Park;Joohee Park;Seoyoung Keum;Ivana Karanovic;Tomislav Karanovic;Joong-Ki Park;Chuleui Jung;Gi-Sik Min
    • Journal of Species Research
    • /
    • 제12권4호
    • /
    • pp.341-354
    • /
    • 2023
  • This is the third series of catalogs reporting on Korean species discovered through the 'Discovery of Korean Indigenous Species'. This catalog includes 22 species of invertebrates, excluding insects. The catalog includes the scientific name, an abridged list of synonyms, collection sites, distribution, diagnosis, and figures for each species. Additionally, we provide the newly assigned Korean name, specimen voucher, and, if available, mitochondrial CO1 or 16S gene sequences of the species listed. All species identified and documented here will be officially listed on the 'National Species List of Korea', a database maintained by the National Institute of Biological Resources(NIBR).

Seismic behavior of steel and sisal fiber reinforced beam-column joint under cyclic loading

  • S.M. Kavitha;G. Venkatesan;Siva Avudaiappan;Chunwei Zhang
    • Structural Engineering and Mechanics
    • /
    • 제88권5호
    • /
    • pp.481-492
    • /
    • 2023
  • The past earthquakes revealed the importance of the design of moment-resisting reinforced concrete framed structures with ductile behavior. Due to seismic activity, failures in framed structures are widespread in beam-column joints. Hence, the joints must be designed to possess sufficient strength and stiffness. This paper investigates the effects of fibers on the ductility of hybrid fiber reinforced self-compacting concrete (HFRSCC) when subjected to seismic actions; overcoming bottlenecks at the beam-column joints has been studied by adding low modulus sisal fiber and high modulus steel fiber. For this, the optimized dose of hooked end steel fiber content (1.5%) was kept constant, and the sisal fiber content was varied at the rate of 0.1%, up to 0.3%. The seismic performance parameters, such as load-displacement behavior, ductility, energy absorption capacity, stiffness degradation, and energy dissipation capacity, were studied. The ductility factor and the cumulative energy dissipation capacity of the hybrid fiber (steel fiber, 1.5% and sisal fiber, 0.2%) added beam-column joint specimen is 100% and 121% greater than the control specimen, respectively. And also the stiffness of the hybrid fiber reinforced specimen is 100% higher than the control specimen. Thus, the test results showed that adding hybrid fibers instead of mono fibers could significantly enhance the seismic performance parameters. Therefore, the hybrid fiber reinforced concrete with 1.5% steel and 0.2% sisal fiber can be effectively used to design structures in seismic-prone areas.

The Impact of ICT Costs on Innovation Activity of Digital Hubs in Regions of Kazakhstan: Universities, SMEs and R&D

  • Anna A. KREDINA;Galiya G. SEITKAN;Nailya K. NURLANOVA;Anel A. KIREYEVA
    • 유통과학연구
    • /
    • 제21권12호
    • /
    • pp.1-13
    • /
    • 2023
  • Purpose: the study aims to examine the impact of ICT on the formation of digital hubs in regions of Kazakhstan, specifically the influence of ICT costs on the level of innovation activity of enterprises, the number of its actors as legal entities by size and region, small and medium enterprises, universities and research and development organisations. Research design, data and methodology: the research methodology is based on the collection of secondary data from the official statistical yearbooks of the Bureau of National Statistics of the Republic of Kazakhstan and the use of quantitative methods, in particular, correlation analysis and multiple regression. Five indicators related to the formation of digital hubs in the regions of the country were selected. Results: the study revealed that ICT spending has an impact on the formation of digital hubs in regions, in particular on the development of the number of legitimate enterprises, SMEs and R&D organisations as actors in digital hubs. A positive dynamic in the growth of the number of actors is visible. However, the hypotheses on the impact of ICT costs on the number of universities and the level of innovation activity were not supported. Conclusions: based on the results of the study, recommendations such as government proposals on strategy development, funding projects of innovation and digital hubs, and business proposals on engaging local entities in digital transformation for the formation of digital hubs in the country's regions have been developed.

Risk factors for orthodontic fixed retention failure: A retrospective controlled study

  • Kaat Verschueren;Amit Arvind Rajbhoj;Giacomo Begnoni;Guy Willems;Anna Verdonck;Maria Cadenas de Llano-Perula
    • 대한치과교정학회지
    • /
    • 제53권6호
    • /
    • pp.365-373
    • /
    • 2023
  • Objective: To investigate the potential correlation between fixed orthodontic retention failure and several patient- and treatment-related factors. Methods: Patients finishing treatment with fixed appliances between 2016 and 2017 were retrospectively included in this study. Those not showing fixed retention failure were considered as control group. Patients with fixed retention failure were considered as the experimental group. Additionally, patients with failure of fixed retainers in the period of June 2019 to March 2021 were prospectively identified and included in the experimental group. The location of the first retention failure, sex, pretreatment dental occlusion, facial characteristics, posttreatment dental occlusion, treatment approach and presence of oral habits were compared between groups before and after treatment separately by using a Fisher exact test and a Mann-Whitney U test. Results: 206 patients with fixed retention failure were included, 169 in the mandibular and 74 in the maxillary jaws. Significant correlations were observed between retention failure in the mandibular jaws and mandibular arch length discrepancy (P = 0.010), post-treatment growth pattern (P = 0.041), nail biting (P < 0.001) and abnormal tongue function (P = 0.002). Retention failure in the maxillary jaws was more frequent in patients with IPR in the mandibular jaws (P = 0.005) and abnormal tongue function (P = 0.021). Conclusions: This study suggests a correlation between fixed retention failure and parafunctional habits, such as nail biting and abnormal tongue function. Prospective studies with larger study populations could further confirm these results.

Characterization of degradation products of the Balsalazide by Mass spectrometry: Optimization of stability-indicating HPLC method for separation and quantification of process related impurities of Balsalazide

  • Chilakabattina Naga Narasimha Babu;Ch. Srinivasa Reddy;Bhagya Kumar Tatavarti;M. Radha Madhavi;Venkateswara Rao Anna
    • 분석과학
    • /
    • 제37권1호
    • /
    • pp.25-38
    • /
    • 2024
  • The study aimed to investigate a novel approach by utilizing liquid chromatography (LC) and liquid chromatography-mass spectrometry (LC-MS) to separate, identify and characterize very nominal quantities of degradation products (DPs) of balsalazide along with its process related impurities without isolation from their reaction mixtures. The impurities along with balsalazide were resolved on spherisorb ODS2 (250×4.6 mm, 5.0 ㎛) column at room temperature using 0.2 M sodium acetate solution at pH 4.5 and methanol in the ratio of 55:45 (v/v) as mobile phase pumped isocratically at 1.0 mL/min as mobile phase and UV detection at 255 nm. The method shows sensitive detection limit of 0.003 ㎍/mL, 0.015 ㎍/mL and 0.009 ㎍/mL respectively for impurity 1, 2 and 3 with calibration curve liner in the range of 50-300 ㎍/mL for balsalazide and 0.05-0.30 for its impurities. The balsalazide pure compound was subjected to stress studies and a total of four degradation products (DPs) were formed during the stress study and all the DPs were characterized with the help of their fragmentation pattern and the masses obtained upon LC-MS/MS. The DPs were identified as 3-({4-[(E)-(4-hydroxyphenyl) diazenyl]benzoyl}amino)propanoic acid (DP 1), 4-[(E)-(4-hydroxyphenyl)diazenyl] benzamide (DP 2), 5-[(E)-(4-carbamoylphenyl)diazenyl]-2-hydroxybenzoic acid (DP 3) and 3-({4-[(E)-phenyldiazenyl]benzoyl}amino)propanoic acid (DP 4). Based on findings, it was concluded that, the proposed method was successfully applicable for routine analysis of balsalazide and its process related impurities in pure drug and formulations and also applicable for identification of known and unknown impurities of balsalazide.

Impact of different levels of lactose and total solids of the liquid diet on calf performance, health, and blood metabolites

  • Gercino Ferreira Virginio Junior;Cecile Anna Jeanne Duranton;Marilia Ribeiro de Paula;Carla Maris Machado Bittar
    • Animal Bioscience
    • /
    • 제37권6호
    • /
    • pp.1031-1040
    • /
    • 2024
  • Objective: This study aimed to evaluate the effect of feeding milk replacer (MR) with varying levels of lactose and the increased supply of total solids (from 750 to 960 g/d) on performance, blood metabolites, and health of Holstein male calves during the preweaning period. Methods: Forty newborn Holstein calves (10 per treatment) were blocked according to birth weight and date of birth and distributed in a randomized block design to different liquid diets: Whole milk powder (WMP) diluted to 125 g/L solids; MR with 48% lactose (48L), diluted to 125 g/L solids; MR with 53% lactose (53L), diluted to 125 g/L solids; 53L MR corrected to 160 g/L solids (16TS) by the inclusion of a solid corrector. Calves were individually housed in wood hutches, fed 6 L/d of the liquid diet, and had free water and starter concentrate access. The study lasted 56 days. Results: Liquid diet intake was higher for calves fed 16TS than for other treatments. Calves fed 16TS presented higher protein and fat intake, followed by those fed WMP and the 48L or 53L MRs. Lactose intake was higher for 16TS-fed calves, followed by 53L, 48L, and WMP-fed calves. Starter and total dry matter intake did not differ among liquid diets. The average daily gain was higher for 16TS than 48L-fed calves, with the other treatments being intermediary. The lowest feed efficiency was observed for calves fed 48L. No effects on health were observed, as well as on selected blood metabolites, except for albumin concentration, which was higher for calves fed 16TS and WMP. Conclusion: Higher total solids content (160 g/L) in MR increases nutrient intake and consequently improves the performance of dairy calves. Feeding MRs with levels of lactose up to 53% of the DM had no deleterious effect on the performance or health of the calves.