• 천문학회보
• /
• 제36권2호
• /
• pp.114.2-114.2
• /
• 2011

We have developed a PDR code to reproduce the high rotational transitions of CO observed with Herschel-PACS. Part of these high-J CO line emission is produced by UV heated outflow walls around protostars. The local FUV radiation flux is calculated by using Monte Carlo method in (${\gamma}$, ${\alpha}$) grid taking anisotropic scattering into account. Kinetic temperature and Abundance of molecules were computed self-consistently. CO Line fluxes are calculated using RIG. We compare our PDR model with the results by Visser et al (2011) to show that the derived FUV radiation field strength can be affected by the grid resolution near the outflow wall and dust scattering.

• Journal of the Optical Society of Korea
• /
• 제2권2호
• /
• pp.45-49
• /
• 1998

We have combined Brillouin scattering experiments and fucdamental optics theory to determine the birefringence of single crystals. Double refraction in anisotropic materials give rise to doublet peaks in Brillouin spectra. With the incident plane orthogonal to the optic axis, the birefrigence of the materials can be determined from one spectrum. We present the Brillouin spectra to confirm this fact for a single crystal $PbMoO_4$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.118-118
• /
• 2000

We investigate Frohlich-like electron--optical-phonon interactionsin uniaxial crytals based on the macroscopic dielectric continuum model. In general, the optical-phonon branches support mixed longitudinal and transverse modes due to the anisotropy. For heterostructures with double interfaces and superlattices, it is known that confined, interface, and half-space optical phonon modes exist in zincblende cystals. In uniaxial structures, additional propagating modes may exist in wurtzite heterosystems due to anisotropic phonon dispersion. This is especially the case when the dielectric properties of the adjacent heterostructure materials do not differ substantially. The dispersion relations and the interaction Hamiltonians for each of these modes are derived.

• 대한기계학회논문집B
• /
• 제22권3호
• /
• pp.399-407
• /
• 1998

The infrared reflection coatings with pigment can be used to protect the surfaces of combustible materials exposed to fire. To obtain high reflectivities in the infrared range (0.5-10.mu.m) important to fire, several dielectric pigments, such as titanium dioxide, iron oxide, and silicon, can be synthesized to polymer coatings. The theoretical analysis shows that the coating design with particles diameter in the 1.5 to 2.5.mu.m range and volume fraction in the 0.1 to 0.2 range is estimated to be optimal. In the analysis of the radiation, the dependent scattering, absorption by polymeric binder, and the internal interface reflection are considered. In addition, the temperature distribution in the semi-transparent coating layer and an opaque substrate (PMMA) is also presented.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2010년도 학술대회 초록집
• /
• pp.27-27
• /
• 2010

There have been several studies about empirical relation between seismic source parameters(e.g., focal mechanisms, depths, magnitudes, etc.) and T-wave observation. In order to delineate the relation, numerical and theoretical approaches to figure out T-wave excitation mechanism are required. In an attempt to investigate source radiation and wave scattering effects in the oceanic crust on T-wave envelopes, we perform three-dimensional numerical modeling to synthesize T-wave envelopes. We first calculate seismic P- and SV-wave energy on the seafloor using the Direct Simulation Monte Carlo based on the Radiative Transfer Theory, which enables us to take into account both realistic seismic source parameters and wave scattering in heterogeneous media, and then estimate excited T-wave energy by normal mode computation. The numerical simulation has been carried out considering the following different conditions: source types (strike and normal faults), source depths (shallow and deep), and wave propagation through homogeneous and heterogeneous Earth media. From the results of numerical modeling, we confirmed that T-wave envelopes vary according to spatial seismic energy distributions on the seafloor for the various input parameters. Furthermore, the synthesized T-wave envelopes show directional patterns due to anisotropic source radiation, and the slope change of T-wave envelopes caused by focal depth. Seismic wave scattering in the oceanic crust is likely to control the shape of envelopes.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.245-253
• /
• 2008

A precise description of the material is a key point to obtain reliable results when using wave propagation codes. In the case of multipass welds, the material is very difficult to describe due to its anisotropic and heterogeneous properties. Two main advances are presented in the following. The first advance is a model which describes the anisotropy resulting from the metal solidification and thus the model reproduces an anisotropy that is correlated with the grain orientation. The model is called MINA for modelling anisotropy from Notebook of Arc welding. With this kind of material model1ing a good description of the behaviour of the wave propagation is obtained, such as beam deviation or even beam division. But another advance is also necessary to have a good amplitude prediction: a good quantification of the attenuation, particularly due to grain scattering, is also required as far as attenuation exhibits a strong anisotropic behaviour too. Measurement of attenuation is difficult to achieve in anisotropic materials. An experimental approach has been based both on the decomposition of experimental beams into plane waves angular spectra and on the propagation modelling through the anisotropic material via transmission coefficients computed in generally triclinic case. Various examples of results are showed and also some prospects to continue refining numerical simulation of wave propagation.

• 비파괴검사학회지
• /
• 제21권3호
• /
• pp.269-276
• /
• 2001

복합재료의 초음파검사는 매직의 탄성이방성으로 인해 빔스큐(beam skew)현상 등이 발생하기 때문에 등방성 재료의 검사에 비해 훨씬 어렵다. 그 동안의 많은 연구의 결과로서 이방성 재료 네 탄성파의 전파 현상에 대한 해석해법이 정립되어 있으나, 그 해석해가 매우 복잡하여 실제 문제의 해를 구하기 위해서는 수치적인 방법에 의존하여야 하는 경우가 많다. 본 연구에서는 횡등방 이방성(transversely isotropic)으로 가정할 수 있는 단일방향 섬유 복합재료 내 점원에 의한 초음파 전파의 해석해를 먼저 구하고, 이러한 복합재료를 질량-스프링 모델로 모델링하여 해석해에 상응하는 수치해를 구하였다. 그 결과, 초음파의 전파에 대한 수치해와 해석해가 매우 잘 일치하는 것을 확인하였다. 동일한 수치해석법을 사용하여 초음파가 복합재료의 자유표면에서 반사되는 현상과 균일에 의해 산란되는 현상에 대한 수치해도 구하였으며 그 결과를 파동역학의 관점에서 고찰하였다. 본 연구에서 그 유효성이 확인된 수치 모델은 복합재료의 초음파검사를 시뮬레이션 함에 있어 매우 유용하게 사용될 수 있을 것이다.

• 한국게임학회 논문지
• /
• 제10권6호
• /
• pp.169-178
• /
• 2010

본 논문은 실시간 응용 프로그램에서 사실적인 금속 재질을 렌더링하기 위한 효과적인 기법을 제안한다. 제안된 기법은 금속면의 미세한 흡집을 표현하기 위해 법선 벡터를 섭동(perturbation)하는 방법을 사용한다. 법선 벡터를 섭동하는 일반적인 방법은 범프(bump) 매핑이나 법선(normal) 매핑 등의 방법을 사용하는 것이다. 그러나 이러한 방식은 이방성 반사 특성을 갖는 표면에서는 사실적인 빛의 산란을 보이지 못한다. 금속 특유의 반사를 표현하기 위해서는 미세면 분포 함수를 이용하여 이방성 반사 특성을 모델링하는 것이 일반적이므로 일반적 법선 섭동만으로는 만족스런 결과를 얻지 못한다. 본 논문은 법선 벡터의 섭동과 함께 미세면 분포 함수를 변형하는 기법을 통해 매우 사실적인 금속면 재질 렌더링이 가능한 기법을 제안한 다. 제안된 기법은 쉽게 GPU 프로그램으로 구현되며, 실시간 환경에서 동작한다.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1624-1638
• /
• 1996

A study of thermophoretic particle deposition has been carried out for a particle laden stagnation flow considering the effect of radiative heat transfer. Energy, concentration and radiative transfer equations are all coupled and have been solved iteratively assuming that absorption and scattering coefficients were proportional to the local concentration of particles. Radiative heat transfer was shown to strongly affect the profiles of temperature and particle concentration. e. g., radiation increases the thickness of thermal boundary layer and wall temperature gradients significantly. As the wall temperature gradients increase, the particle concentration at the wall decreases due to thermophoretic particle transport. The deposition rate that is thermophoretic velocity times particle concentration at the wall decreases as the effects of radiation increases. The effects of optical thickness, conduction to radiation parameter and wall emissivity have been determined. The effects of anisotropic scattering are shown as insignificant.

• 정보처리학회논문지A
• /
• 제16A권5호
• /
• pp.307-318
• /
• 2009

컴퓨터 그래픽스에서 구름과 같은 대기 현상을 모델링하고 렌더링하는 것은 그 복잡성과 규모, 편재성 등으로 인해 상당히 까다로운 연구과제들 중의 하나이다. 본 논문은 컴퓨터 게임이나 항공 시뮬레이션 분야에서 요구되는, 실시간에 처리될 수 있는 구름 모델링과 렌더링 방법을 제안한다. 제안하는 방법은 사용자가 직관적이고 대화형 편집 과정을 거쳐 권운, 층운, 적운 등의 다양한 형태를 생성할 수 있다. 또한, 메타볼과 계층적 구형 파티클을 사용하여, 세부 묘사를 자동으로 추가할 수 있다. 생성된 파티클들은 다중 순방향 산란과 이방성 산란을 고려하여 빌보드 방식으로 출력함으로써 실시간 처리가 가능하다.