• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2212-2216
• /
• 2011

An ionic liquid-based ultrasonic-assisted extraction method has been successfully applied to the effective extraction of phenolic compounds from Laminaria japonica Aresch. Three kinds of 1-alkyl-3-methyl-imidazolium with different cations and anions were evaluated for extraction efficiency. The results showed that both the characteristics of anions and cations have remarkable effects on the extraction efficiency. In addition, the ionic liquid-based ultrasonic-assisted extraction procedure was also optimized on some extraction parameters, such as ultrasonic power, extraction time and solid-liquid ratio. Compared with the conventional solvent, the optimum approach gained the highest extraction efficiency within the shortest extraction time. Average recoveries of phenolic compounds were from 75.5% to 88.3% at three concentration levels.

• Journal of Food Hygiene and Safety
• /
• v.17 no.1
• /
• pp.15-19
• /
• 2002

The objectives of this study were to investigate the change of silicon, cations and anions dissolved in water before and after thawing, and analyzed what the white-colored precipitate (WP) farmed after thawing was composed of. The silicon concentration that has been changed might have been compared with the weight of WP under water-free state. The major component of WP has been approved to be a silicon, while calsium was only a little contained. As the weight of WP has been nearly equal to the reduced silicon concentration, the weight of its could be changeable calculated by silica (SiO$_2$) molecular weight. Therefore, WP could have been presumed to be a silica. The more silicon concentration was increased, the more weight of silicon was increased. Except for the sample "C", the amounts of cations and anions could be found to be unchangeable nearly. As a result of that, WP has been apparent to be silica itself while most of ions (excluded with Si) of any others were not changed.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.327-328
• /
• 2005

Trace anions in high-sulfate wastewater from mainly derelict mines were determined by ion chromatography with on-line preconcentration and preelution technique. As the sample was preconcentrated and more strongly held ions were preeluted to the principal separation system, this approach was highly effective in removing large concentration of sulfate in high-sulfate wastewater. With this practical on-line preelution treatment, the peaks of fluoride and chloride showed good resolution even when the sulfate concentration was as high as 2000 mg/L and the analyzed total metal concentration was above 500 mg/L.

• Journal of the Korean Chemical Society
• /
• v.22 no.3
• /
• pp.173-183
• /
• 1978

Bulk polymerization of propylene sulfide with o-sulfobenzoic anhydride as initiator was carried out and the polymerization proceeded by a zwitterionic mechanism. Chemical and spectroscopic investigation of the purified polymer revealed that the polymer contained two end groups-thiolester of benzoic acid o-sulfonate anions and acyclic tert-sulfonium ions which were formed by termination of episulfonium ions with sulfide groups in the polymer chains. The concentration of sulfonate anions was nearly the same as the concentration of acyclic tert-sulfonium ions, as expected for macrozwitterions. The cocatalysis mechanism by a trace of water was excluded and the other possible mechanisms were discussed on the basis of end group analysis.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.229-235
• /
• 2005

Various alkoxyamine initiators for nitroxide mediated radical polymerization (NMRP) were prepared in high yields by a simple substitution reaction of nitroxide anions with benzyl bromide. The required nitroxide anions were easily generated by treating either nitroxide free radicals or hydroxy amine with an alkali metal such as sodium or potassium in THF. This method is both practical and efficient, since the ionic conditions prevent other side reactions from occurring, such as the self-coupling or oligomerization reactions that are observed in the case of radical trapping conditions. To demonstrate the utility of the resulting alkoxyamine initiators, end- and telechelic-alkoxyamine PEG macroinitiators derived from the alkoxyamines were synthesized by a simple chemical modification, and used for the preparation of PEG-b-PS and PS-b-PEG-b-PS block copolymers by NMRP.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.96.1-96.1
• /
• 2017

This presentation introduces anodizing science of typical valve metals of Al, Mg and Ti, based on the ionic transport through the andic oxide films in various electrolyte compositions. Depending on the electrolyte composition, metal ions and anions can migrate through the andic oxide film without its dielectric breakdown when point defects are present within the anodic oxide films under high applied electric field. On the other hand, if anodic oxide films are broken by local joule heating due to ionic migration, metal ions and anions can migrate through the broken sites and meet together to form new anodic films, known as plasma electrolytic oxidation (PEO) treatment. In this presentation, basics of conventional anodizing and PEO methods are introduced in detail, based on the ionic migration and movement mechanism through anodic oxide films by point defects and by local dielectric breakdown of anodic oxide films.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.835-841
• /
• 1995

The quantitation of inorganic anions in various drinking waters were investigated using capillary electrophoresis(CE) and the results were compared with ion chromatography(IC). With CE, in contrast to IC, was demonstrated rapid analysis, good efficiency, a low detection limit and the low comsumption of a solvent and samples. CE analysis was used 5 mM sodium chromate(pH 8.0) containing 20 mM tetraalkylammoniumbromide at -25kV applied voltage with indirect UV detection at 254 nm. This results in exceedingly short analysis time within 3 min. with efficiencies approaching 200,000 theoretical plates. The coefficients of variants of migration time are less than 0.8% and those of peak area are less than 2.3%. Detection limits for quantitative determination were 300 ppb-50 ppm level. These optimum conditions are applicable to various samples without pretreatment.

• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.495-498
• /
• 1998

The effect of high concentration ion matrix on the analysis of low anion concentration in the suppressed ion chromatography was studied. The anions studied were $Br^-$, $NO_3{^-}$, $HPO_4^{2-}$, $SO_4^{2-}$, and $C_2O_4^{2-}$ in the presence of excess NaCl and $CaCl_2$. In this study we suggested that the erroneous results in the suppressed ion chromatographic determination of small concentration of anions were not caused by the interaction of large amount of cation in the suppressor, but by the interaction of cation with concerned anion in the original solution. The error in the analysis of such anion can not be eliminated just by dilution. Therefore, we suggested that standard addition method might be adequate for analyses of those samples.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.562-566
• /
• 2008

Reaction of AgNO3 with triethanolaminetriisonicotinate (L) produces 1 D coordination polymer of [Ag3(L)2](NO3)3 and the same treatment of Cu(NO3)2 with L gives 1D coordination polymer of [Cu(L)2](NO3)2. The nonrigid triethanolaminetriisonicotinate acts as a m 3-bridged tridentate for [Ag3(L)2](NO3)3 and a m 2-bridged bidentate for [Cu(L)2](NO3)2 to produce unusual motifs. The NO3- anions can be smoothly exchanged by PF6- anions in an aqueous suspension without destruction of the skeletal structure.

• Corrosion Science and Technology
• /
• v.16 no.4
• /
• pp.167-174
• /
• 2017

Bicarbonate/carbonate and molybdate anions have been characterized for their inhibitive effect on pitting corrosion of carbon steel in simulated concrete pore solution by using electrochemical tests such as electrochemical impedance (EIS) and linear polarization (LP). It was revealed that bicarbonate/carbonate has a weak inhibitive effect on pitting corrosion that is approximately one order of magnitude lower compared to hydroxide. Molybdate is effective against pitting corrosion induced by the concentration of chloride as low as 113 mM and can increase the pitting potential of a previously pitted sample to the oxygen evolution potential by the concentration of molybdate as much as 14.6 mM only. The formation of a $CaMoO_4$ film on the surface hinders the reduction of dissolved oxygen on the steel surface, reducing corrosion potential and increasing the safety margin between corrosion potential and pitting potential further. In addition, pore-plugging by $FeMoO_4$ as a type of salt film within pits increases the likelihood of repassivation.