• Journal of Pharmaceutical Investigation
• /
• 제26권2호
• /
• pp.119-124
• /
• 1996

To develop oral controlled release dosage forms, ionic interactions between polymers and drugs were evaluated. Hydroxypropylmethyl cellulose and carboxymethylene were used as model nonionic and ionic polymers, respectively. 5-fluorouracil, propranolol-HCl and sodium salicylate were selected as model nonionic, cationic and anionic, respectively. Polymer-drug mixtures were compressed into tablets and drug release kinetics from these tablets were determined. Drug release from the tablets made of the nonionic polymer was not affected by the charge of drugs, rather, was regulated by the solubility of drugs in different pH releasing media. However, drug release kinetics were significantly affected when drug-polymer ionic interactions exist. Enhanced drug release was observed from anionic drug-anionic polymer tablets due to ionic repulsion, whereas drug release was retarded in cationic drug-anionic polymer tablets owing to ionic attractive force. Therefore, the results suggested that the polymer-drug interactions are important factors in designing controlled release dosage forms.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3593-3596
• /
• 2012

The water-soluble conjugated polymer with fluorescence quenching as a result of electrostatic interaction and aggregation was synthesized through Suzuki polymerization. The absorption and emission of anionic polymer (a-PFP) is blue shifted as compared with cationic polymer (c-PFP) although getting same backbone, and the absolute PL quantum efficiency of a-PFP in water is over 90% due to good solubility in aqueous solution. We anticipate that the fluorescence quenching of anionic and cationic polymers, with same conjugated backbone, could be shown in aqueous solution.

• 대한화학회지
• /
• 제20권4호
• /
• pp.251-259
• /
• 1976

고분자의 graft site 분포를 통계적 방법으로 구하고 그 이론치를 GPC를 사용한 실험에 의하여 증명하였다. 결과에 따르면 고분자의 metalation (Li+ion)은 통계이론에 따르고 anionic graft 반응결과는 homopolymer(side chain과 backbone 고분자) 및 graft site가 통계적으로 분포되어 있는 graft polymer로 구성되어 있다

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.2016-2022
• /
• 2013

Ionically modified ${\beta}$-cyclodextrins, which have excellent water-solubility, have been interested in purification technology as well as drug carrier system. The present study summarizes the synthesis and characterization of cationic and anionic ${\beta}$-cyclodextrin (${\beta}$-CyD) products using by polycondensation. The oligo (${\beta}$-CyD)s are synthesized from ${\beta}$-CyD, epichlorohydrin (EP) and choline chloride (CC; for cationic polymer) or chloroacetic acid (CAA; for anionic polymer) through one step polycondenstaion process. Unlike the previous studies, we successfully purified the ionic ${\beta}$-CyD condensation products from the ${\beta}$-CyD reaction mixtures and accomplished a great level of structural analysis. The detailed structural analysis of these ionic ${\beta}$-CyD compounds is done by $^1H$ NMR, MALDI-TOF as well as GPC analysis and confirms the formation of oligomers with a few units of ${\beta}$-CyD. We found that the sequence of reactant addition also could effect on the molecular weight of the resulting product as well as the molar ratio of the reactants. Finally, we used the cationic and anionic ${\beta}$-CyD oligomers for fabricating multilayer films by layer-layer process.

• 자원환경지질
• /
• 제32권3호
• /
• pp.307-315
• /
• 1999

Four organic polymers were mixed with mothmorillonite. Two cationic polymers a hi로 molecular weight polyacrylamide (494C) and a low molecular weight polymer (587C).Two anionic polymers include a high molecular weight polymer (aerotil). Each clay supension series were allowed to stand for 24 hours and were centrifuged, and the clay plugs were washed and dried. The dried samples investigated by XRD, IR and CEC measurement. The suspended clay containing anionic polymers was not flocculated at any concentratuons of polymer. But the suspendions containing two cationic polymers were rapidly flocculated at almost all concentrations. the d(001) spacings of Na-montmorillonite after being with cationic polymer 587C show about 15$\AA$ suggesting the polymers may have entered the interlayer spaces. The polymer 494C-treated sample produced double peaks of about 12 and 15$\AA$ in XRD. It indicates that the high molecular weight polymer. And cationic polymer 494C may be adsorbed mainy on the outside surface of clay, and some polymers may peretrate into olny interlayers in the margin of montmorillonite particles because of its high molecular weught. CEC of polumer 587-treated sample was reduecd mmarkedly suggesting polymer blocks CEC sites. The d(001) spacings of Ca-montmorillonite after being treated with cationic polymers show about 15$\AA$ suggesting that the interlayer spaces have not been expanded. In the experiment using a dilute Ca-bearing solution, the suspended caly containinf anionic polymers was flocculated. The results indicate that the flocculation behavior of montmorillonite-polymer supension depends on not only polymer properties such as concentration, electric charge and molecular weight but also compositions of solvent.

• 한국고분자학회지:고분자과학과기술
• /
• 제8권4호
• /
• pp.421-426
• /
• 1997

• Elastomers and Composites
• /
• 제47권1호
• /
• pp.30-35
• /
• 2012

새로운 스타폴리머인 바이오폴리부타디엔은 리빙 음이온중합이라는 고분자의 정밀 합성법을 통하여 분자량, 분자량분포, 조성 및 세부구조를 제어하였다. 리빙 음이온중합에 의해 n-BuLi으로 개시된 polybutadienyllithium(PBDLi)의 연쇄말단이 ESO(Epoxidized Soybean Oil)의 기능성 그룹과 커플링 반응을 일으키며 스타폴리머를 합성한다. 분자량이 1,000/5,000/10,000(g/mol)인 PBDLi을 중합하여 THF존재하에서 반응 후 GPC에 의한 분자량 및 arms분석과 $^1H$-NMR, FT-IR에 의한 고분자 구조 분석을 통하여 바이오폴리부타디엔의 합성을 확인하였다.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.367-372
• /
• 2005

As a preliminary work for the preparation of nylon 6/c1ay nanocomposites by reactive extrusion, nylon 6/c1ay nanocomposites were prepared by anionic polymerization in a flask. In order to investigate the effect of the intercalation of clay layers, the clay feeding times, such as in pre-mixing where the clay was fed before initiation of polymerization and in after-mixing method where the clay was fed after initiation of polymerization, were changed. The appearance of the WAXD peak of nanocomposites prepared by the pre-mixing method was obvious and the tensile strength was decreased compared with that of pure nylon 6, which indicates that the clay layers were not dispersed and distributed. During the preparation of the nanocomposites by the after-mixing method, disordering of the clay layers was observed with increasing clay addition time and was suspected to result from the rapid polymerization of nylon 6 within the clay layers.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.460-462
• /
• 2005

• Elastomers and Composites
• /
• 제50권3호
• /
• pp.167-174
• /
• 2015

Anionic epoxy compound was synthesized and added to asphalt aiming to prepare self-healing asphalt. Epoxy-modified asphalt showed excellent modification effect and healing effect as well. The results revealed that with 5% addition of polymer the tensile strength, impact strength and complex shear modulus of the polymer-modified asphalt increased by 65%. 64% and 35%, respectively. It seems that high interaction occurs between polymer and asphalt matrix. Self-healing efficiency of the polymer-modified asphalt based on tensile strength showed 100%, comparing to 79% of straight asphalt. In impact experiment the polymer-modified asphalt showed 99% of healing efficiency, comparing to 77% of straight asphalt. In rheological experiment the polymer-modified asphalt showed 103% of healing efficiency, comparing to 72% of straight asphalt. It appears that the ionic bonding existing in epoxy polymers contributed to high values of self-healing efficiency. The polymer which has high intermolecular force fills the crack of the asphalt, pulling the opponent side each other, and so the original properties were restored.