• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1802-1811
• /
• 2016

A novel battery SOH estimation algorithm based on outlier detection has been presented. The Battery state of health (SOH) is one of the most important parameters that describes the usability state of the power battery system. Firstly, a battery system model with lifetime fading characteristic was established, and the battery characteristic parameters were acquired from the lifetime fading process. Then, the outlier detection method based on angular distribution was used to identify the outliers among the battery behaviors. Lastly, the functional relationship between battery SOH and the outlier distribution was obtained by polynomial fitting method. The experimental results show that the algorithm can identify the outliers accurately, and the absolute error between the SOH estimation value and true value is less than 3%.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.160-161
• /
• 2010

본 논문에서는 컬러 정보와 형태 정보를 이용한 상표 영상 검색 시스템을 제안하였다. 컬러 정보는 영역을 분할하여 영역별 컬러 분포 히스토그램 특성에 근거한 컬러 정보를 이용하였고, 형태 정보는 경계면 추출, 무게 중심 추출, angular 샘플링 등의 전처리 과정과 무게 중심으로부터 경계면까지 거리의 합, 표준 편차, 장/단축 비율을 계산을 이용하였다. 특히, 무게중심을 이용한 angular 샘플링을 이용하여 특징을 추출하고 처리 시간을 줄일 수 있었다. 사용자는 컬러와 형태 정보에 의한 검색을 수행하고, 또한 가중치를 부여함으로써 두 방법을 혼합하여 사용할 수 있다.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.120-127
• /
• 2013

A novel severe plastic deformation process named half channel angular extrusion (HCAE) is proposed in order to produce bulk UFG materials. In HCAE process, equal channel angular extrusion (ECAE) and conventional forward extrusion process is integrated to increase the strain per pass and effectiveness of the SPD process. Three-dimensional finite element analysis was carried out to study the deformation behavior of the materials in the HCAE process. HCAE process was performed experimentally on commercially pure aluminum (AA1050) and micro-Vickers hardness test was used to measure the distribution of hardness on the section of normal to the extrusion direction. The results show that HCAE is able to impose more intensive strains per pass and give rise to higher micro-hardness than ECAE.

• Nuclear Engineering and Technology
• /
• 제24권3호
• /
• pp.319-328
• /
• 1992

일차원 구에서 유한요소법의 Galerkin formulation이 일차형태의 단일 에너지 중성자 수송방정식의 적분법에 적용되었다. 구분적으로 1차 혹은 2차인 Lagrange 다항식들이 선형대수 방정식들의 집합을 만들기 위해 적분법에 있는 각의존 중성자속(angular flux)에 대하여 활용되었다. 수치해석이 균질구에서의 임계문제와 비균질구에서의 scalar flux 분포에 대해서 행해졌다. 공간과 각에 대하여 연속적인 유한요소를 사용한 균질구에서의 임계문제에 대한 유한요소법의 결과들은 이론적인 해들자 비교되었다. 비균질 문제에서는 각자 공간에 대하여 불연속 유한요소를 사용하여 구한 scalar flux 분포는 ANISN code에 의한 계산결과와 잘 일치하였다.

• 천문학회지
• /
• 제40권4호
• /
• pp.131-132
• /
• 2007

The research of OH maser emission sources with high angular resolution is complicated by the effects of interstellar scattering: more over, most of the OH maser sources are located in the galactic plane where the scattering is largest. However, the data available from pulsar studies on the spatial distribution of the amount of scattering indicate that there is a strong non-uniformity in the distribution of the amount of scattering material. There are directions in the galactic plane where the scattering is an order of magnitude higher than the average, as well as directions where the scattering is much lower. The latter provide an opportunity to investigate OH masers with the full angular resolution offered by very long baseline interferometry instruments, like the VLBA, and measure their true angular size, shape and brightness temperature. We have observed approximately 100 OH maser sources, distributed all over the northern hemisphere, with the VLBA in order to study the scattering properties of the interstellar medium.

• 전자공학회논문지D
• /
• 제36D권1호
• /
• pp.90-99
• /
• 1999

본 논문에서는 반응로 안에서 쌍극성 확산장의 거리 확장에 따르는 앞덮개(Presheath)영역에서의 효과를 고려하고, 앞덮개 영역 내에서 이온과 중성자간의 충돌을 고려한 입사각 분포에 따른 에너지 플럭스를 계산하였다. 이론의 각분포 현상과 에너지 플럭스 분포를 이온의 온도와 함께 앞덮개 효과를 고려된 새로운 근사 해석적 모델을 제시한다. 실제 식각 공정에 대한 실험결과 충돌이 없는 덮개에서도 이온의 입사각이 산란되는 현상이 나타난다. 이 현상은 이온의 앞덮개지역을 통과하면서 쌍극성 확산장(ambipolar diffusion field)에 의해 운동에너지를 얻게 되는데, 이때 얻어진 운동에너지가 가스 분자 충돌에 의해 변화는 효과 때문이라고 볼 수 있다. 제안된 근사적 해석모델을 이용하여 트렌치에서의 중착 형상을 모의실험 하였다.

• 대한기계학회논문집B
• /
• 제22권2호
• /
• pp.139-152
• /
• 1998

In the present study, the flow characteristics of developing laminar oscillatory flows in a square -sectional 180 deg. curved duct are investigated experimentally. The experimental study using air in a square-sectional 180 deg. curved duct is carried out to measure velocity distributions with a data acquisition and LDV (Laser Doppler Velocimetry) processing system. In this system, Rotating Machinery Resolver (RMR) and PHASE program are used to obtain the results of unsteady flows. The major flow characteristics of developing oscillatory flows are found by analyzing velocity curves, mean velocity profiles, time-averaged velocity distribution of secondary flow, wall shear stress distributions, and entrance lengths. In a lower dimensionless angular frequency, the axial velocity distribution of laminar oscillatory flow in a curved duct shows a convex shape in a central part and axial symmetry. The maximum value of wall shear stress in a lower dimensionless angular frequency is located in an outside wall, but according to increasing the dimensionless angular frequency, the maximum of wall shear stress is moved to inner wall. The entrance lengths of laminar oscillatory flows in a square-sectional 180 deg. curved duct is obtained to 90 deg. of bended angle of duct in this experimental conditions.

• 조명전기설비학회논문지
• /
• 제28권8호
• /
• pp.32-39
• /
• 2014

In general, non-directional LED lamps including high transmittance cover are more advantageous than directional LED lamps, which are efficient enough to improve luminous efficacy and obtain certification, allowing wide manufacture, sale, and distribution. Although KS C 7651(Self-ballasted LED lamps-Safety and performance requirements) was revised in July 2013, however, many companies are having a lot of difficulties in keeping the certification and product development for the lack of the photometric analysis for non-directional LED lamps. In this paper, through the measurement of the angular distribution of luminous flux of incandescent lamp and non-directional LED lamps, we examined the reasonability of non-directional LED lamps' standards as suggested in KS C 7651. According to the results, even if non-directional LED lamps satisfy KS C 7651, when compared to an incandescent lamp, they showed less diffusive than the incandescent lamp and the distribution of the luminous flux depending on the angle fluctuated greatly even among LED lamps. Judging by the result, the current standard of the non-directional LED lamps, KS C 7651, has been comprehended that the angular distribution of the luminous flux needs to be presented after being much more thoroughly standardized.

• Restorative Dentistry and Endodontics
• /
• 제44권2호
• /
• pp.15.1-15.8
• /
• 2019

Objectives: The aim of this study was to investigate whether the diameter and direction of the plunger and simulation of the periodontal ligament (PDL) affected the stress distribution in endodontically treated premolars. Methods: A fracture strength test was simulated via finite element analysis. A base model was set up, and the following parameters were modified: plunger diameter (3 mm vs. 6 mm), plunger direction (vertical vs. $135^{\circ}$ angular to the central fossa), and PDL simulation. The analysis was conducted using the CosmosWorks structural analysis program, and the results are presented in terms of von Mises stresses. Results: The smaller plunger increased the stresses at the contact area of the crown, but the plunger diameter had no effect on the stress distribution within the root. An angular plunger direction increased stresses within the root, as well as at the buccal cusp of the crown, compared with the vertical direction. Simulation of the PDL caused higher stress accumulation, especially in the cervical region of the root. Conclusions: The plunger diameter had no effect on the stress distribution in the roots, whereas the plunger direction and PDL simulation did affect the stress distribution. More stringent standards can be established by taking such parameters into account when performing fracture testing in future studies.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.28-36
• /
• 1998

In order to establish the hydraulic design process of the torque converter, pump, turbine and stator were designed by reverse design method including one dimensional analysis, angular momentum distribution and forced vortex design. And the significance of evaluation of the circulation flow rate in torus of the torque converter was verified by numerical calculation if the combined blade rows of pump and turbine. It was confirmed that the computational method using interrow mixing model by Park and Cho was reliable to predict the flow-field and performance of the torque converter.