• Journal of Korean Physical Therapy Science
• /
• v.10 no.2
• /
• pp.42-52
• /
• 2003

An assessment of the subtalar joint in cerebral palsies can contribute to predict the function of ambulation in CP children. Ambulation is one of the most important function to guarantee the CP children independent life. This paper is to investigate some relationships between the function of standing and walling and the assessment of the subtalar joint in children with Cerebral palsy. And also to present the correlation between the ambulation and the Gross Motor Function Measures in children with cerebral palsy. Sixty-eight children with cerebral palsy were participated in this study. Evaluations of the subtalar pint parameters were performed by the goniometer and the angle finder, and the GMFM scores were measured by their teacher and researcher trained technically. A regression analysis was applied to figure out the relationship between the subtalar pint parameters(ROM and RCSP) and the function of standing and walking. A correlation analysis was employed to see how much the subtalar pint parameters could be predicted from GMFM scores in walling and standing. The results were as follows: 1) The significant differences were not observed between the total ROM, RCSP and the function of standing(F=8.065, p<.001) and walking(F=6.511, p<.001) in CP children. 2) The subtalar pint parameters(total ROM, RCSP) have the lower relevance to the function of standing and walling in CP children.(p>.05) 3) The total ROM and RCSP in both feet have the significant differences between the CP children and the normal children.(p<.001) 4) The GMFM scores were significantly correlated with the function of walling and standing in CP children.(r=247, p<.05) In this research, it is found that the significant relevance between the quantitative analysis of subtalar pint in children with cerebral palsy and the gross motor function of ambulation in standing and walling. However, it is difficult to predict the direct relationship of subtalar pint parameters and the function of ambulation, because subtalar pint scores and GMFM are only measured as quantities not qualities. Therefore, it is more reasonable to investigate the influence of subtalar pint parameters on ambulation in children with cerebral palsies, adding to the multifocal assessment of the children, rather than vice versa.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.412-418
• /
• 2020

Generally, the propeller shaft that constitutes the ship shaft system has different patterns of behavior due to the ef ects of engine power, propeller load and eccentric thrust, which increases the risk of bearing failure by causing local load variations. To prevent this, different studies of the propulsion shaft system have been conducted focused the relative inclination angle and oil film retention between the shaft and the support bearing, mainly with respect to the Rules for the Classification of Steel Ships. However, in order to secure the stability of the propulsion shaft via a more detailed evaluation, it is necessary to consider dynamic conditions, including the transient state due to sudden change in the stern wakefield. In this context, a 50,000 DWT vessel was analyzed using the strain gauge method, and the effects of propeller shaft movement were analyzed on the starboard rudder turn which is a typical transient state during normal continuous rate(NCR) operation in ballast draught condition. Analysis results confirm that the changed propeller eccentric thrust acts as a force that temporarily pushes down the shaft to increase the local load of the stern tube bearing and negatively affects the stability of the shaft system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.102-109
• /
• 2014

A particle system is used for modeling the physical phenomenon. There are many traditional ways for simulation modeling which can be well suited for application including the landscapes of branches, clouds, waves, fog, rain, snow and fireworks in the three-dimensional space. In this paper, we present a new fireworks modeling technique for modeling 3D firework based on Firework Particle Tracking (FPT) using the particle system. Our method can track and recognize the launched and exploded particle of fireworks, and extracts relatively accurate 3D positions of the particles using 3D depth values. It can realize 3D simulation by using tracking information such as position, speed, color and life time of the firework particle. We exploit Region of Interest (ROI) for fast particle extraction and the prevention of false particle extraction caused by noise. Moreover, Kalman filter is used to enhance the robustness in launch step. We propose a new fireworks particle tracking method for the efficient tracking of particles by considering maximum moving range and moving direction of particles, and shall show that the 3D speeds of particles can be obtained by finding the rotation angles of fireworks. Also, we carry out the performance evaluation of particle tracking: tracking speed and accuracy for tracking, classification, rotation angle respectively with respect to four types of fireworks: sphere, circle, chrysanthemum and heart.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.2
• /
• pp.130-135
• /
• 2013

Purpose: Preshaped Locking compression plate(LCP) has holes with fixed angle between screw and plate and have advantage firm fixation because it has stability of angular and axial deformity. We evaluated usefulness of LCP after open reduction and internal fixation in distal fibular fracture. Materials and Methods: Between December 2011 and May 2012, 23 patients with fracture of distal fibula were followed up at least 12 months underwent open reduction and internal fixation with LCP. There were 15 males and 8 females with a mean age 39.8(20~69) years. According to Danis-Weber classification, there were 20 cases of type B and 3 cases of type C. There were 13 cases of isolated lateral malleolus fractures, 1 case of bimalleolar fracture, 6 cases of trimalleolar fractures and 3 cases of distal tibia fractures with proximal fibula fracture. Intraoperatively, we assessed whether preshaped LCP fit lateral margin of distal fibula or not and evaluated quality of reduction and postoperative complications. The cases were analyzed by radiological bone union time and clinical results according to the criteria of Meyer Results: Of all cases, complete bone union was achieved and average radiological bone union time was 7.3(6~12) weeks. The clinical results were excellent in 18 cases(78%), good in 5 cases(22%). There were 5 cases of plate with 3 holes, 13 cases of plate with 4 holes, 2 cases of plate with 5 holes, 1 case of plate with 6 holes and 2 cases of plate with 7 holes. The average number of screws at proximal fragement was 2.5 and at distal fragment was 3.5. In 14 cases (60.8 %), we needed re-bending of plate because the distance between plate and lateral cortical margin of distal fibula was more than 5 mm at anteroposterior X-ray after reduction. All cases have anatomical reduction and there were no complications of wound infections. There were no complaint about hardware irritation. Conclusion: At fractures of distal fibula,preshaped LCP had a excellent stability although far cortex was not fixed with screw and bending of plate. And there are less complications of hardware irritation and wound problems. But, Some complement would be needed because there were no complete fitting between precontour of LCP and lateral cortical margin of distal fibula.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.2
• /
• pp.57-67
• /
• 2003

Suppose that dental occlusion is related to body posture. We want to find out that improving occlusal balance may affect vibration and distribution of C.O.P. in which way, by measuring change of posture and center of gravity (center of pressure, C.O.P.) which plays important role in measuring balance sensation. Total 11 students at Kyung Hee dental college students, 4 females and 9 males (age: 23-30) participated in this test, who have normal occlusion (Angle's classification I), no TMJ problems. All of the participants have no tooth loss except 3rd molar, no prosthesis over single tooth restoration, no orthopedic problems which affect balance sensation, and no otorhinolaryngological problems. First, we registrated bite by centric relation, and then fabricated stabilization splint that is increased 3.5mm vertical dimension around premolar region. By F-scan (Tekscan Inc., Boston, Mass), we measured discrepancy of average contact pressure of left and right foot. And we also measured discrepancy of vibration of C.O.P(center of pressure). before setting stabilization splint and after wearing stabilization splint at intervals of 1 week, 2 weeks, 3 weeks after. In normal human beings, improved occlusal balance by stabilization splint leads to decrease of vibration of C.O.P. (P<0.05). One week after wearing stabilization splint, vibration of C.O.P. decreased reliably (P<0.05), two weeks after wearing stabilization splint, vibration of C.O.P. decreased similarly comparing to before wearing and one week after wearing. (P<0.05) After two weeks and three weeks, however, it was hard to find reliability. (P>0.05) Difference between average contact pressure of right and left foot also decreased. (P<0.05) We could find decrease after one week of wearing stabilization splint (P<0.05) and two weeks after, the decrease was more reliable than one week after. (P<0.05) After two weeks and three weeks, however, it was hard to find reliability. Improvement of occlusal balance leads to decrease of vibration of C.O.P. and decrease of difference between right and left average contact pressure.

• Journal of Technologic Dentistry
• /
• v.29 no.2
• /
• pp.197-211
• /
• 2007

With the development of orthodontics and increasing concerns on physical appearance, the number of patients has been steadily increasing. It is quite important not only to make effective cure plans and accurate diagnoses but also to have a thorough grasp of patients' malocclusion types and their occurrence frequency, in addition to patients' personality in order to cure the patients appropriately. This study is based on 946 malocclusion patients who had visited Chong-A Dental Hospital from 1999 to 2004 and investigated their aspects of malocclusion and characteristics of their gender, age and residence. The results are as follows. 1. The number of patients per year had been decreased until 2001, after which year the number had fluctuated. The number was the largest in 1999, 169 and the smallest in 2001, 140. Female occupied 68.0% of the total, twice as many as male, 32.0%) 2. Based on the Angle's classification, 19 or over year - old group was the largest of the total, 59.3% and 6 or younger year - old group, the smallest, 0.5%. The 19 or over year old group was less than a half of the total (47.4%) in 2003 and there were no patients who belonged to the 6 or younger year - old group in 2003 and 2004. 3. Distributions on the types of malocclusion have shown that 39.9 % of the total are in the Class I, the largest, 31.0% in the Class I and 29.2 in the Class II, the smallest. 1) The number of the ClassI was 73, the largest, that of the Class III being 35, the smallest in 1999. On the whole, the number of the Class I accounted for the largest part of the total. 2) The number of male patients in the Class II was the smallest, generally being the largest in the Class I. In case of female, that of the Class III was the smallest. 3) Based on the age, the Class I was the highest in between 7 and 13 age group, the Class III the lowest. The Class I occupied the largest around 40%. 4) In the shape of physiognomy, the meso occupied the largest part among all the Class, of which the Class II was the highest, 64.2%. The bracy was the largest in the Class I, and the dolicho in the Class III. 5) In the profile, the convex shape was the largest in the Class I and II, and especially in the Class II, over 3/4 of the total, 75.4%. In contrast, the direct shape was the largest in the Class III and the sunken shape occupied 33.3%, which was nearly ten times more than the case of the Class I and III. 6) In the asymmetry of physiognomy, the number of patients of the Class IIIwas the largest, 34.1% and that of the Class II, the smallest, 19.5%. It was found that about one fourth of the malocclusion patients were under the asymmetry of physiognomy. 4. In the distribution of patients' residence, 81.4% were from the Seoul Metropolis and 48.2% from Gangnam-Gu where Chong-A Dental Hospital is located and Seocho-Gu and Songpa-Gu which are adjacent to Gangnam-Gu.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.1-5
• /
• 2016

This research performed tests of Video Fire Detector and criteria of installation to make suggestions regarding the criteria that must be reflected in NFSC 203 by comparing the standards of FM Approvals, UL, ISO7240 and NFPA 72. FM Standard related to Video Fire Detector test has been classified as Smoke, Flame type, but the UL Standard has classified only as a Smoke type. This research examined 6 cases of fire phenomenon detection case in ISO 7240 and 3 cases in NFPA 72, respectively. There are 15 items required for the installation standard of a Video Fire Detector and each field standard is presented as a per installation method. To apply a Video Fire Detector, the pertinent items (the definition of term, detector's classification, structure and function among its test item) must be inserted. In addition, 7 items of the fire test, i.e., the sensitivity adjustment, prevent false alarm, ambient temperature test, the effective sensitivity and detection distance and viewing angle, aging test, flood test, must be applied to the actual test. For installation in the field, the operation environment and levels of illumination, and NFSC 203 must be set, and standards relevant to the sound system, indicators' installation distance, etc. need to be inserted.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.12
• /
• pp.7-20
• /
• 2017

In this study, effects of grain size distribution on the shear strength and rheological properties are investigated for coarse- and fine-grained soils by using direct shear apparatus. Shear strengths are estimated for fine-grained soils with the maximum particle size of 0.075 mm and coarse-grained soils with the maximum particle size of 0.425 mm and fine contents of 17% prepared at dry and liquid limit states. The direct shear tests are conducted under the relatively slow shear velocity, which corresponds to the reactivated landslide or debris flow after collapse according to the landslide classification. In addition, for the evaluation of rheological properties, residual shear strengths for both fine- and coarsegrained soils prepared under liquid limit states are obtained by multiple reversal shear tests under three shear velocities. From the relationship between residual shear strengths and shear rates, Bingham plastic viscosity and yield stress are estimated. The direct shear tests show that cohesions of fine-grained soil are greater than those of coarse-grained soil at both dry and liquid limit states. However, internal friction angles of fine-grained soil are smaller than those of coarse-grained soil. In case of rheological parameters, the plastic viscosity and yield stress of fine-grained soils are greater than those of coarse-grained soils. This study may be effectively used for the prediction of the reactivated landslide or debris flow after collapse.

• The korean journal of orthodontics
• /
• v.40 no.5
• /
• pp.334-341
• /
• 2010

Objective: The purpose of this study was to evaluate morphologic differences in the mandibular arch between Egyptian and Korean subjects. Methods: The Egyptian sample consisted of 94 mandibular casts (35 Class I, 32 Class II and 27 Class III). The Korean sample consisted of 462 mandibular casts (114 Class I, 119 Class II, and 135 Class III). The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth. The subjects were grouped according to arch form to compare the frequency distribution of the 3 arch forms between the ethnic groups in each Angle classification. Results: Egyptians had significantly narrower intermolar and intercanine widths ($p$ < 0.001), and shallower intermolar and intercanine depths ($p$ < 0.001) than Koreans. There was an even frequency distribution of the 3 arch forms within the Egyptian group ($p$ = 0.46). However, in the Korean group, the most frequent arch form was the square arch form (46.7%), while the frequency of the tapered arch form was significantly lower (18.8%). Conclusions: These results might provide helpful information in evaluating morphologic differences between ethnic groups in selection of preformed superelastic archwires.

• The korean journal of orthodontics
• /
• v.50 no.1
• /
• pp.33-41
• /
• 2020

Objective: To investigate the distribution and phenotypes of hemifacial microsomia (HFM) and its association with other anomalies. Methods: This study included 249 Korean patients with HFM, whose charts, photographs, radiographs, and/or computed tomography scans acquired during 1998-2018 were available from Seoul National University Hospital and Dental Hospital. Prevalence according to sex, side involvement, degree of mandibular deformity, compensatory growth of the mandibular body, and Angle's classification, and its association with other anomalies were statistically analyzed. Results: Prevalence was not different between male and female patients (55.0% vs. 45.0%, p > 0.05). Unilateral HFM (UHFM) was more prevalent than bilateral HFM (BHFM) (86.3% vs. 13.7%, p < 0.001). Although distribution of the Pruzansky-Kaban types differed significantly in patients with UHFM (I, 53.0%; IIa, 18.6%; IIb, 24.7%; III, 3.7%; p < 0.001), no difference was observed in occurrence between the right and left sides (52.6% vs. 47.4%, p > 0.05). Among patients with BHFM, prevalence of different Pruzansky-Kaban types on the right and left sides was greater than that of the same type on both sides (67.6% vs. 32.4%, p < 0.05). Despite hypoplasia of the condyle/ramus complex, compensatory growth of the mandibular body on the ipsilateral side occurred in 35 patients (14.1%). Class I and II molar relationships were more prevalent than Class III molar relationships (93.2% vs. 6.8%, p < 0.001). Forty-eight patients (19.3%) had other anomalies, with 50.0% and 14.4% in the BHFM and UHFM groups (p < 0.001). Conclusions: Patients with HFM require individualized diagnosis and treatment planning because of diverse phenotypes and associations with other anomalies.