• Safety and Health at Work
• /
• v.2 no.3
• /
• pp.236-242
• /
• 2011

Objectives: To determine the feasibility of predicting static and dynamic peak back-compressive forces based on (1) static back compressive force values at the lift origin and destination and (2) lifting speed. Methods: Ten male subjects performed symmetric mid-sagittal floor-to-shoulder, floor-to-waist, and waist-to-shoulder lifts at three different speeds (slow, medium, and fast), and with two different loads (light and heavy). Two-dimensional kinematics and kinetics were captured. Linear regression analyses were used to develop prediction equations, the amount of predictability, and significance for static and dynamic peak back-compressive forces based on a static origin and destination average (SODA) backcompressive force. Results: Static and dynamic peak back-compressive forces were highly predicted by the SODA, with R2 values ranging from 0.830 to 0.947. Slopes were significantly different between slow and fast lifting speeds (p < 0.05) for the dynamic peak prediction equations. The slope of the regression line for static prediction was significantly greater than one with a significant positive intercept value. Conclusion: SODA under-predict both static and dynamic peak back-compressive force values. Peak values are highly predictable and could be readily determined using back-compressive force assessments at the origin and destination of a lifting task. This could be valuable for enhancing job design and analysis in the workplace and for large-scale studies where a full analysis of each lifting task is not feasible.

• Journal of the Korean Society of Costume
• /
• v.59 no.7
• /
• pp.65-76
• /
• 2009

Korea has established a code for the economic and cultural industry that covers a wide range of classes unlike the old information era which was limited to the simple knowledge, technology, tools, morals, and customers that had been established in our society. On the other hand, 'culture marketing' is a series of marketing activities in which value-added items are created and shared. The combination of business management and culture seemed pretty awkward considering how rapidly the world was changing, however, the nature of today's culture has changed and the economic nature of culture products has resulted from those changes. In this paper, two authors who expressed the cultural identity in the culture products are studied through a comparison analysis; the author Min Yeongsoon expressed the identity confusion that she experienced in a foreign country and how she overcame homesickness in her work; and the author Kim Ata expressed his confidence in Asia and used his clear and loud voice to express the culture in his work. In addition, today's culture products are affected by the surrounding cultures such as the member's traditional society, environmental culture, and individual's culture. It is a good source for good works of art. In this study, the efforts of seeking the cultural identity, structuring the concept, seeking a new market and possibilities are used to make a consistent process in order to make a series of the systems required for planning and developing culture products.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.3
• /
• pp.21-36
• /
• 2016

The purposes of this study were to find out how the characteristics of Chinoiserie in the perspective of the West have influenced on the contemporary womens' fashion. 440 pieces of photo data for this study were collected, focusing on Paris collections as a fashion capital of Europe, for the period of 10 years from 2005 through 2014. The results of this study are as follows. The impacts of Chinoiserie have increased consistently since 2009. The reasons for the increased impacts are assumed that the influence of Chinoiserie on the contemporary fashion rekindled it, as the worldwide attentions to China have been growing since Beijing Olimpic, Aug. 2008. Reviewing by seasons, the trend of Chinoiserie has been more distinct in F/W season comparing with S/S season except year 2007 and 2011. Considering the results of analysis for each designer, Leonard and Shiatzy Chen, the designers of Chinese-origin, appeared to apply the characteristics of Chinoiserie on the contemporary fashion most successfully, while European designers, such as Dries Van Noten, Valentino, and Jean Paul Gaultier, also appeared to accommodate actively the design styles of Chinoiserie in their fashions. Moreover the Asian designers, such as Aesuro Tayama, Andrew GN, and Kenzo, had been using Chinoiserie as a means of providing oriental ambience. The results of this study would be helpful to design and plan the fashion items which are scheduled to enter Chinese markets by Korean designer brands and fashion enterprises. In addition, it is considered that these results would help Chinese designers understand the design characteristics of Chinoiserie which have evoked empathy of people all around the world, when they make Western stage debut in the future.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.9
• /
• pp.1185-1192
• /
• 2012

This study investigated the hydrocarbonoclastic microbial community present on weathered crude oil and their ability to degrade weathered oil in seawater obtained from the Gulf St. Vincent (SA, Australia). Examination of the native seawater communities capable of utilizing hydrocarbon as the sole carbon source identified a maximum recovery of just $6.6{\times}10^1\;CFU/ml$, with these values dramatically increased in the weathered oil, reaching $4.1{\times}10^4\;CFU/ml$. The weathered oil (dominated by > $C_{30}$ fractions; $750,000{\pm}150,000mg/l$) was subject to an 8 week laboratory-based degradation microcosm study. By day 56, the natural inoculums degraded the soluble hydrocarbons (initial concentrations $3,400{\pm}700mg/l$ and $1,700{\pm}340mg/l$ for the control and seawater, respectively) to below detectable levels, and biodegradation of the residual oil reached 62% ($254,000{\pm}40,000mg/l$) and 66% ($285,000{\pm}45,000mg/l$) in the control and seawater sources, respectively. In addition, the residual oil gas chromatogram profiles changed with the presence of short and intermediate hydrocarbon chains. 16S rDNA DGGE sequence analysis revealed species affiliated with the genera Roseobacter, Alteromonas, Yeosuana aromativorans, and Pseudomonas, renowned oil-degrading organisms previously thought to be associated with the environment where the oil contaminated rather than also being present in the contaminating oil. This study highlights the importance of microbiological techniques for isolation and characterisation, coupled with molecular techniques for identification, in understanding the role and function of native oil communities.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.38.4-39
• /
• 2021

The Local Volume Mapper (LVM), for the Sloan Digital Sky Survey V, consists of four 16 cm telescopes with three fiber spectrographs in the Las Campanas Observatory in Chile. With the fixed telescopes on optical tables, the Alt-Alt mounted siderostats point and guide targets during spectrograph exposures. We are developing the integrated LVM instrument control software. Considering international travel restrictions caused by the COVID-19 pandemic in 2021, we decided to make a simplified version of siderostat to test the LVM telescope control system in Korea. The prototype siderostat consists of two aluminum flat mirrors, optomechanical housing structures made by aluminum profiles, and the Planewave L-350 mount. We designed the optical mirrors and the optomechanical structure of the siderostat. From structural analysis at various pointing cases, we estimated the tilt misalignments of mirrors within 4 arcsec, which would affect the telescope pointing errors.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.143-152
• /
• 2005

The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.

• Journal of Korean Academy of Nursing
• /
• v.23 no.4
• /
• pp.617-630
• /
• 1993

Factors related to health promotion activities and quality of life in Korean women with arthritis have not been clearly identified. Predictors of health promotion might be identified that will enhance the well - being of this group. Accordingly, the findings of the study will contribute additional information about the relationship between health promotion and quality of life and will add to the research on quality of life of individuals with a leading cause of disability--arthritis. The purpose of the study was to examine the relationship of selected background factors (years of illness, perceived severity of illness, uncertainty in illness), perceived self- efficacy, and health promoting behaviors to the quality of life of Korean women with arthritis. A cross - sectional descriptive design was used in this study to investigate relationships among the variables of interest. The sample was composed of 96 women who had arhtrits and visited large university hospital in Seoul for regular check up or pre-scription of medication. The purpose of a descriptive correlational design was to determine the absence or presence of relationships among variables that were measurable (Polit & Hungler, 1981, p.147). The design of this study was appropriate because it yielded answers to the research questions and hypotheses regarding the relationships among the model variables. the Questionnaire contained demographic information, translated Mishel Uncertainty in illness Scale-Community form (MUIS-C) (Mishel, 1987), translated and modified Disease Course Graphic Scale(DCGS) which was developed by Braden (1990), translated Sherer. et al.’s General Self-Efficacy Scale (1982), The Health -Promoting Lifestyle Profile (HPLP), developed by Walker, Sechrist, and Fender (1987) and traslated to Korean by Ha, and quality of life was measured by Face Scale (Andrew, 1976). Several steps of verification for the translation process were carefully conducted. Data analysis included descriptive correlational statistics and multiple regression techniques. Health promotion was the only contributor to pre-dict quality of life. Results showed that enabling cognitive perceptual factor (self-efficacy) mediates the disruptive force (uncertainty in ill-ness) on achieving a health promoting self- help behavior. The findings of this study also indicated that illness - related variable of severity of illness was mediated by health promotion, which buffered it's impact on quality of life.

• Anxiety and mood
• /
• v.11 no.2
• /
• pp.120-128
• /
• 2015

Objectives : The Minnesota Multiphasic Personality Inventory (MMPI) is a commonly used psychological test measuring personality and psychopathology in both clinical and non-clinical population. This study was to evaluate characteristic MMPI-2 profile associated with the risk of suicide among college students. Methods : We analyzed the survey response of 2,964 college students who participated in a health survey from a school health center at a national university in 2011. Those who endorsed any of six items on the suicidaity module of MINI were classified as a suicide risk group and remaining students who did not as a control group. Then we compared the Patient Health Questionnaire (PHQ-9) score, the MMPI-2 Clinical scales and Restructured Clinical (RC) scales. To evaluate the correlation RC scales with suicidality score, Pearson correlation analysis was performed. Results : The suicide risk group was 464 students, and the control group was 2,500. The classification result of suicidality, 255 (8.6%) students were low-risk group, 149 (4.8%) students were moderate-risk group and 60 (2.0%) students were high-risk group. In the suicide risk group, VRIN, F scale, Clinical scale and RC scales were significantly higher. In the control group L, K and S scales were significantly higher. Suicidality score has significant correlation with all RC scales. Conclusion : In the suicide risk group, overall psychopathology was higher than the control group. Taken together, features of depressive symptom, antisocial behavior, aggressiveness, introversion may indicate the risk of suicide in college students. These results display both clinical and public health implications for clinicians and school health professionals.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.252-259
• /
• 2013

Building Information Modeling (BIM) is utilizing CAD technology in a way that ultimately ties all the components of a building together as objects imbedded with information, and has been changing the way we design and build over the last 20-30 years. In Polytechnic Institute of NYU, there are four BIM courses offered which provide students with different levels of knowledge regarding BIM Technique, BIM Standards, BIM Guideline and Roadmap for Private and Public Implementation, BIM Application in Real Projects, the Cooperation of BIM and IPD for Public Works in New York City. With advanced BIM technology, BIM's integration into the construction process and its incorporation into project delivery systems, especially Integrated Project Delivery (IPD) are the bridges between technology, industry and research. This paper presents an integrated BIM curriculum with three modules: 1) BIM functions and Bid Preparation; 2) Time-Cost Trade-off Analysis; and 3) Problems Solving in BIM/IPD Environment. In this project-based curriculum developed by the common efforts of academia, public agency and industry, the objectives are: (1) to provide the information and skills needed to successfully implement BIM into the construction phase; (2) to identify BIM's role in construction and the project delivery system; (3) to develop a module in conjunction with leading BIM into project delivery system, particularly coordination between BIM and IPD; (4) to connect technology and research into industry. The course assessment was conducted and the results indicate that it is a successful reform in construction management education.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.53.1-53.1
• /
• 2015

The GMT-Consortium Large Earth Finder(G-CLEF) is one of the first light instruments at the Giant Magellan Telescope. The international consortium consists of five astronomical institutes including the Center for Astrophysics, the Observatories of Carnegie Institute, the University of Catolica in Chile, the University of Chicago, and Korea Astronomy and Space Science Institute, led by CfA. The extremely precise radial velocity capability is one of the principal instrumental feature of G-CLEF. The RV goal is 10 cm/s capable of detecting an Earth-like planet around a Sun-like host star. This high precision wavelength calibration stability requires a set of significantly tight optomechanical tolerances in the mechanical design of the Flexure Control Camera system. KASI is in charge of the Flexure Control Camera and the Calibration Light System for the G-CLEF spectrograph. In this presentation, we introduce the preliminary design and analysis results of the G-CLEF Flexure Control Camera.