• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.268-276
• /
• 2004

As recent demands for cold rolling oil for steel, not only better lubricity, but cost reduction and improvement of work environment are increasingly required. In order to respond these demands, Nihon Parkerizing has developed rolling oils with completely new emulsification system. Comparing with conventional oils, the new system indicates better iron fine removability to maintain oil concentration, due to better iron fine dispersion, and superior mill stain resistance by spray stain test.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.5
• /
• pp.438-444
• /
• 2001

In this paper, an actively controlled anti-rolling system is considered to reduced the rolling motion of the ship. In this control system, a small auxiliary mass is installed on the upper area of the ship, and the actuator is connected between the auxiliary mass and the ship. The actuator reacts against the auxiliary mass, applying inertial control corves to the ship to reduce the rolling motion in the desired manner. in this paper, we apply the PID controller to design the anit-rolling control system for the controlled hip. And the experimental result shows that the desirable control performance is achieved.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.4
• /
• pp.43-48
• /
• 2000

In this paper, an actively controlled anti-rolling system is considered to reduce the rolling motion of the ship. In this control system, a small auxiliary mass is installed on the upper area of the ship, and actuator us connected between the auxiliary mass and a ship. The actuator reacts against the auxiliary mass, applying inertial control forces to the ship to reduce the rolling motion in the desired manner. In this paper, we apply the PID controller to design the anti-rolling control system for the controlled ship. And the experimental result shows that the desirable control performance is achieved.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.2
• /
• pp.39-45
• /
• 2004

We have investigated the usefulness of an active stabilizing system to reduce ship rolling under disturbances, using varying reaction of the flaps. In the proposed anti-rolling system for a ship, the flaps, as the actuator, are installed on the stern, in order to reject the rolling motion induced by disturbances, such as waves. The action induced by the flaps, which is dependent upon the power of the disturbances, can keep the ship in balance. In this study, we define the system parameters under the given system structure, using spectral analysis and experimental studies. Based on this information, we design the controller to evaluate the usefulness of the proposed system.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.1
• /
• pp.40-47
• /
• 2011

Mobile harbor which is a novel concept of ocean transportation to bring the containers from the cargo ship waiting on the ocean away is being focused now. To provide the mobile harbor with the stable loading/unloading condition, it is necessary to develop the oscillation mitigation technologies such as anti-rolling system. Anti-rolling system using AMD(Active Mass Driving) has merits that it can handle the disturbances more actively and mitigate the rolling oscillation faster than other type anti-rolling system. However, rack-and-pinion type AMD has problems such as big friction noise from gears and motor, wear and tear, and continuous maintenance. In this paper, novel anti-rolling system using Maglev type AMD for mobile harbor is suggested in order to resolve the problems caused by the friction. This novel anti-rolling system doesn't make any friction because it supports the moving mass by using magnetic levitation force and moves it by using propulsion force from the linear motor. The demo system of the novel anti-rolling system using maglev type AMD has been developed in order to investigate its feasibility. This paper presents the procedures and results of development of this demo system.

• Journal of Mechanical Science and Technology
• /
• v.18 no.8
• /
• pp.1312-1318
• /
• 2004

Roll stabilization systems for ships are employed to increase comfort for passengers, maintain full working capabilities for members of the crew and prevent cargo damage. In this paper, we have investigated the usefulness of active stabilizing system to reduce ship rolling under disturbances, using varied reaction of the flaps. In the proposed anti-rolling system for a ship, the flaps as the actuator are installed on the stern to reject rolling motion induced by disturbances such as wave. The action induced by flaps depends on power of disturbances and can take the ship balance. Especially, in this study we define the system parameters under the given system structure and design the controller to evaluate the usefulness of the proposed system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.183-183
• /
• 2000

In this paper, web-based remote monitoring for cold-rolling system is developed and the analysis of spatial control system is performed. The remote monitoring system is able to grasp the status of cold-rolling system regardless of time and locations. We analyzed spatial control algorithm of the system with the collected data. The usefulness of spatial control system is shown by simulation studies.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.2
• /
• pp.60-66
• /
• 2003

In this paper, an actively controlled anti-rolling system is considered, in order to reduce the rolling motion of a ship. In this control system, a small auxiliary mass is installed on the upper area of the ship, and an actuator is connected between the auxiliary mass and the ship. The actuator reacts the auxiliary mass, applying inertial control forces to the ship to reduce the rolling motion in the desired manner. In this paper, we introduce LMI based H$_{\infty}$ control approach to design the anti-rolling control system for the controlled ship. And the experimental results show that the desirable control performance can be achieved.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2179-2194
• /
• 2010

RAMS is becoming increasingly important in the decision making process for the rolling stock projects in order to improve competitiveness by reducing system life cycle cost while improving reliability, availability, maintainability and safety. In order to apply and manage RAMS of rolling stock systems effectively in the operator perspective, it is essential to integrate and control RAMS systematically from the early stage of rolling stock projects. RAMS management is to implement a RAMS system into rolling stock projects in terms of a rolling stock operator, which presents the strategic directions of RAMS policy, objectives, requirements, control, analysis, measurement and improvement throughout life cycle of rolling stock projects. This article presents a new framework of RAMS management that provides an effective and efficient way for managing RAMS in rolling stock systems in the railway industry.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.447-451
• /
• 1999

The plate crown and shape control of plate rolling has become important to obtain not only improved quality but also better yield of products and higher work ratio of rolling. Therefore, the development of a new plate crown and shape control system has been demanded in plate rolling mill. The 3rd Plate Rolling Works of POSCO introduced the new unique system