• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.964-968
• /
• 2010

Ground anchor, commonly referred to as tiebacks or tie-down, is essentially steel elements secured in the ground by cement grout. They are used to provide either lateral or vertical support for various engineered structures, and are effective in all types of soil and rock. However, ground anchor can not be used in soft clay because anchor resistance would not be guaranteed. In this paper, conceptual introduction of the Smart Anchor is presented. The Smart Anchor is a kind of friction type anchor, the load is diffused and applied to the various parts of the distributed bond length, having less impact on the grout strength, and being able to secure necessary anchoring force in relatively soft grounds. This study shows a numerical study of predicting the load transfer of The Smart Anchor in soft clay. A beam-column analysis was performed by a elastic-plastic P-y curves in soft clay.

• Structural Engineering and Mechanics
• /
• v.44 no.2
• /
• pp.239-255
• /
• 2012

This work presents a contribution to understand the inverted trussed beams behavior. The system has a main beam and struts with rectangular cross section associated to a wire rope enlaced to the main beam. It is an unpublished system with the advantage of easy positioning of the wire rope, once it is a continuous and connected by turnbuckles. It is a system that can be used as support for concrete formworks or for rehabilitation wooden beams proposal. The enlacement of the cable demands a small notch at the top of the cross section and a cross pin at the bottom. Six inverted trussed beams were tested, with spans of 180 cm with cables diameter of 1/4". Additionally, four simple beams without any external steel cable were also tested with material from the same lot of wood, allowing a comparison in rupture. The results showed capacity gain of around 60% compared to a simple beam. Once the wire rope characteristics and anchoring are very important for structure response, some improvement suggestions for the efficiency of the cables are also presented.

• KSBB Journal
• /
• v.26 no.3
• /
• pp.243-247
• /
• 2011

Using Bacillus subtilis spore display system, with cotG as an anchoring motif, levansucrase from Zymomonas mobilis, was displayed on the outer surface of Bacillus subtilis spore. Flow cytometry of DB104 (pSDJH-cotG-levU) spore, proved the surface localization of CotG-LevU fusion protein on the spore compared to that of DB104. Enzymatic activity of DB104 (pSDJH-cotG-levU) spore showed more than 1.5 times higher levansucrase specific activity compared to that of the host spore, which is a remarkable increase of enzymatic activity considering the existence of sacA (sucrase) and sacB (levansucrase) in the Bacillus subtilis chromosome. The spore integrity, revealed by sporulation frequency test after heat and lysozyme treatment of spore, did not changed at all in spite of the CotG-LevU fusion protein incorporation into the spore coat layer during spore formation process. These data prove again that Bacillus subtilis spore could be considered as good live immobilization vehicle for efficient bioconversion process.

• Geomechanics and Engineering
• /
• v.18 no.3
• /
• pp.277-289
• /
• 2019

In this study, an innovative anchoring approach has been developed dealing with all relevant aspects in consideration of previous works. An ultimate pulling force calculation of anchor is presented from a geotechnical point of view. The proposed umbrella anchor focuses not only on the friction resistance capacity, but also on the axial capacity of the composite end structure and the friction capacity occurring around the wedge. Even though the theoretical background is proposed, in-situ application requires high-level mechanical design. Hence, the required parts have been carefully improved and are composed of anchor body, anchor cap, connection brackets, cutter vanes, open-close ring, support elements and grouting system. Besides, stretcher element made of aramid fabric, interior grouting system, guide tube and cable-locking apparatus are the unique parts of this design. The production and placement steps of real sized anchors are explained in detail. Experimental results of 52 pullout tests on the weak dry soils and 12 in-situ tests inside natural soil indicate that the proposed approach is conservative and its peak pullout value is directly limited by a maximum strength of anchored soil layer if other failure possibilities are eliminated. Umbrella anchor is an alternative to conventional anchor applications used in all types of soils. It not only provides time and workmanship benefits, but also a high level of economic gain and safe design.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.1
• /
• pp.70-77
• /
• 2005

This paper studied the feasibility for utilization of the automatic fishing information recording system, which stores and manages navigational information and fish catch results of a fishing vessel in a portable storing device, in order to help promote the systematic management of fishing information by offshore and coastal fishing vessels. Position accuracy was within 10 meters on the position accuracy experiment using GPS module. Characteristics of navigation according to the navigation, anchoring and fishing operation showed the difference of navigation track information for GPS, and fishing possibility of fishing boat could be estimated through the analysis as the utilization result of system for the large pair trawl and large purse seiners. In particular, it is impossible to provide false positional information by arbitrarily operating the system, and it may be possible to present the factual results of fish catch by date, fishing ground, and fish species by comparing the fishing information with fish catch. Such contents are considered to be useful as basic data for the management of fisheries resources.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11b
• /
• pp.3-38
• /
• 2000

Slope draperies in soil and rock are a well known method to avoid rockfalls into the roads or onto housings. Common wire mesh or a combination of wire mesh and wire rope nets are pinned to the slope by the means of fully grouted nails or anchors. Most of these installations have not been designed to stabilize the slope, but simply avoid the rocks from bouncing. The combination of soil- or rocknailing with a designable flexible facing system offers the advantage of a longterm stabilization of slopes and can replace other standard methods for slope stabilization. The capability to transfer axial and shear loads from the flexible facing system to the anchor points is most decisive for the design of the stabilization system. But the transfer of forces by mesh as pure surface protection devices is limited on account of their tensile strength and above all also by the possible force transmission to the anchoring points. Strong wire rope nets increase the performance for slope stabilizations with greater distances between nails and anchors and are widely used in Europe. However, they are comparatively expensive in relation to the protected surface. Today, special processes enable the production of diagonally structured mesh from high-tensile steel wire. These mesh provide tensile strengths comparable to wire rope nets. The interaction of mesh and fastening to nail / anchor has been investigated in comprehensive laboratory tests. This also in an effort to find a suitable fastening plates which allows an optimal utilization of the strength of the mesh in tangential (slope-parallel) as well as in vertical direction (perpendicular to the slope). The trials also confirmed that these new mesh, in combination with suitable plates, enable substantial pretensioning of the system. Such pretensioning increases the efficiency of the protection system. This restricts deformations in the surface section of critical slopes which might otherwise cause slides and movements as a result of dilatation. Suitable dimensioning models permit to correctly dimension such systems. The new mesh with the adapted fastening elements have already been installed in first pilot projects in Switzerland and Germany and provide useful information on handling and effects.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.1
• /
• pp.35-48
• /
• 1995

To develop the optimal design method for the longline type scallop culturing facilities in the open sea numerical calculations and hydraulic model experiments are carried out for the stability and function optimization. Using the results for the motion and tension of the facilities, stable design concepts and effects of motion control system by vertical anchor and resistance discs art discussed. The results of this study that can be applied to the design are as follows: 1) Total external forces by design wave $(H_{1/3}\;=\;6,7\;m,\;T_{1/3}\;=\;12sec)$ at the coastal waters of Jumunjin for unit facility (one main line) are estimated to 5-20 tons, and required anchor weights are 10-40 tons in the case of 2-point mooring system. Though the present facilities are stable to steady currents, but is unstable to the extreme wave condition of return period of 10 years. 2) The dimensions and depth of array systems must be designed considering the ecological environments as well as the physical characteristics including the mooring and holding forces that are proportional to the length and relative depth of main line to wave length, and the number of buoys and nets. 3) Oscillation of the facility is influenced by water particle motion and the weight of hanging net, and is excited at both edge, especially at the lee side. To reduce the motion of the nets, the vertical anchoring system and the resistence disc method are recommended by the experimental results, 4) The damage of rope near the anchor by abrasion should be prevented using the ring-type connection parts or anchor chains.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 2002.02a
• /
• pp.2-27
• /
• 2002

As pact of a long-ranged project that aims at establishing database-theoretic semantics as a model of computational semantics, this presentation focuses on the development of a syntactic component for processing strings of words or sentences to construct semantic data structures. For design arid modeling purposes, the present treatment will be restricted to the analysis of some problematic constructions of Korean involving semi-free word order, conjunction arid temporal anchoring, and adnominal modification and antecedent binding. The present work heavily relies on Hausser's (1999, 2000) SLIM theory for language that is based on surface compositionality, time-linearity arid two other conditions on natural language processing. Time-linear syntax for natural language has been shown to be conceptually simple and computationally efficient. The associated semantics is complex, however, because it must deal with situated language involving interactive multi-agents. Nevertheless, by processing input word strings in a time-linear mode, the syntax cart incrementally construct the necessary semantic structures for relevant queries and valid inferences. The fragment of Korean syntax will be implemented in Malaga, a C-type implementation language that was enriched for both programming and debugging purposes arid that was particluarly made suitable for implementing in Left-Associative Grammar. This presentation will show how the system of syntactic rules with constraining subrules processes Korean sentences in a step-by-step time-linear manner to incrementally construct semantic data structures that mainly specify relations with their argument, temporal, and binding structures.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.109-125
• /
• 1996

Biases and errors in the human being's reasoning process have been studied continuously by the researchers, especially psychlogists and social scientists. These bias phenomenon is classified on the basis of the origin, i. e. motivation and cognition. Furthermore the necessity of research on the bias in the management and management information system areas in increased more and more recently, which have their academic backgrounds in the psychology and social science. The biased information stream is transformed into the systematic error due to the motivation and cognitive bias of human-being, then its resulting phenomena are as follows; 1. the availability of salient information 2. preconceived ideas or theories about peoples and event 3. anchoring and perseverence phenomena. In order to reduce the information errors, Satty suggested the Analytic Hierarchy Process (AHP) that is the subject of this paper and that is widely used for evaluation of complex decision making alternatives. THerefore this paper studies AHP's effects and its limitations in applying to the management area. Thus this paper compared the performances of the 3 models : 1 the traditional additive regression model. 2 regression model using the factor score, and 3 the regression model with AHP. As a result, 3 models produce the different outcomes.

• Korean Journal of Organic Agriculture
• /
• v.32 no.1
• /
• pp.25-37
• /
• 2024

This study is to apply behavioral economics-an economics that studies actual human behavior based on cognitive psychology-to the farming decision-making process of onion and garlic farmers. Of behavioral economic theories, dual system theory and prospect theory (value function), heuristic and bias were surveyed and examined in the field. The reference point of farmers was farming experience of the previous year, and so they showed reference dependence and anchoring heuristic, not rational thinking on production cost plan. And they showed status quo bias that cultivated continuously the previous year or the present crop. This status quo bias is related to loss aversion propensity. Farmers did not usually change cultivating crops, in other words, they showed diminishing sensitivity-insensitive to those that the more revenue or loss was increased. This diminishing sensitivity is related to loss aversion propensity and status quo bias. Also, farmers had representativeness heuristic because they regarded auction price of Garakdong wholesale market as the standard price level despite various prices by production region. And farmers had the affect heuristic that they depended on producers' organization data more than the state-run research institute ones about cultivation intentions and actual situations.