• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2008년도 제16차 학술대회
• /
• pp.178-178
• /
• 2008

In order to improve static stability and healing of reattached labrum, we combined the advantages of suture bridge and transosseous technique. Using the conventional 3 portal for anterior instability, check stability of bony Bankart and preparation of glenoid bed in 3 way including removal, reshaping or mobilization of bony fragment. Two anchors were inserted to the superior and inferior portion and medial edge of bony Bankart lesion. It usually corresponded to the area of IGHL. Medial mattress sutures were applied around IGHL complex to get enough depth of glenoid coverage using suture hook. Make 3.5mm pushlock anchor hole to the articular edge of glenoid cartilage. Proximal suture bridge was applied at first and then distal suture bridge was inserted to mobilize the labrum in proximal direction. These construction can provide more stable labral repair with wide contact and compression in case of deficient bony stability. It not only avoids technical disadvantage of point contact with anchor fixation, but also decreasing gap formation through cross compression of labrum that couldn't gain even with the transosseous fixation which affords linear compression effect. Additional bony stability could be gained if the the bony fragment was mobilized to the glenoid margin with potential healing bed or reshaped for the good contact with reattached labrum.

• 복합신소재구조학회 논문집
• /
• 제6권2호
• /
• pp.32-39
• /
• 2015

So far, square concrete filled tubular(CFT) columns have been used in a limited width thickness ratio. The reason is that local buckling occurs in steel tube easily. Once the local buckling occurs, the confinement effect of steel tube on concrete disappears. In this study, we developed welded built-up square steel tube with reinforcement which are placed at the center of the tube width acts as an anchor. 3 specimens of slender welded built-up square CFT columns and 3 specimens of slender welded built-up square steel tube columns were manufactured with parameters of width(B) of steel tube, width thickness ratio(B/t). we conducted a experimental test on the 6 specimens under eccentric load, and evaluated the structural resistance and behavior of 6 specimens.

• 한국통신학회논문지
• /
• 제35권12A호
• /
• pp.1160-1170
• /
• 2010

기존의 다중경로 설정 방법은 소스로부터 목적지까지 명확하게 분리된 다중경로를 보장하지 못할 뿐만 아니라, 다중경로의 라우팅 정보를 설정하고 유지하기 위한 오버헤드가 많다. 본 논문에서는 다중경로를 설정하는 과정에서 플러딩 방식을 제거하고, 트래픽 부하를 분산시키며, 경로 갱신에 참여하는 노드의 수를 최소화함으로써, 에너지 효율적인 EDM(Explicit Disjoint Multipath) 방식을 제안한다. EDM은 논리적으로 다중경로가 구성될 수 있는 논리적인 파이프라인을 구성하고, 물리적으로 파이프라인을 통해 목적지까지 경유지 기반 지오그래픽 라우팅을 수행한다. EDM은 네트워크 트래픽 부하를 분산시키고, 에너지 소모를 균등화할 수 있으며, 네트워크 생명주기를 연장시킬 수 있다.

• 로봇학회논문지
• /
• 제11권3호
• /
• pp.127-132
• /
• 2016

For a practical mobile robot team such as carrying out a search and rescue mission in a disaster area, the localization have to be guaranteed even in an environment where the network infrastructure is destroyed or a global positioning system (GPS) is unavailable. The proposed architecture supports localizing robots seamlessly by finding their relative locations while moving from a global outdoor environment to a local indoor position. The proposed schemes use a cooperative positioning system (CPS) based on the two-way ranging (TWR) technique. In the proposed TWR-based CPS, each non-localized mobile robot act as tag, and finds its position using bilateral range measurements of all localized mobile robots. The localized mobile robots act as anchors, and support the localization of mobile robots in the GPS-shadow region such as an indoor environment. As a tag localizes its position with anchors, the position error of the anchor propagates to the tag, and the position error of the tag accumulates the position errors of the anchor. To minimize the effect of error propagation, this paper suggests the new scheme of full-mesh based CPS for improving the position accuracy. The proposed schemes assuring localization were validated through experiment results.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권2호
• /
• pp.183-190
• /
• 2001

A sub-structure is uplift if the floating greater than dead load of a structure. When such occasion arise, a structure sustain damage. In general, the measures for floating prevention of structure are a permanent anchor method and a drainage method. The primary construction cost of a permanent anchor method is heavy. And a drainage method is needed maintenance management long term. At this point, the measures for floating prevention of a notion being requires the other days. Therefore, at this study a simple construction and a economic vertical drainage system was developed. The findings be used in the in-situ and gave careful consideration to an application. The result of examination, this system considering a characteristic of coefficient of permeability for the ground controls occurrence of floating despite the water level rise of the ground, which a period of construction get shorter compared with other methods, which understood that measures satisfactory in the financial aspect. Especially, A structure occurring effects of flatting under the course of construction made use of it. As the result of the effect of it was confirmed by construction.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.84-92
• /
• 2012

Anchorage zone in prestressed concrete cable stayed bridges is very important area due to the more accurate analysis is needed to estimate the behavior. In the study, since the cable anchorage zone in the prestressed concrete cable-stayed bridge is subject to a large amount of concentrated tendon forces, it shows very complicated stress distributions and causes a serious local cracks. Accordingly, It is necessary to investigate the parameters of affecting the stress properties, such as the cable inclination, the position of anchor plate, the modeling method and the three dimensional effect. The tensile stress distribution of anchorage zone is compared to the actual design condition by varing the stiffness of spring element in the local modeling and an appropriate position of anchor plate is determined. These results would be elementary data to the stress state of anchorage zone and more efficient design.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.222.2-223
• /
• 2003

Renal dipeptidase (RDPase, EC 3.4.13.19), an ectoenzyme of renal proximal tubules, is covalently bound to outer leaflet of lipid bilayer via glycosylphosphatidylinositol (GPI)-anchor. Chitin is a major component of the shells of crustacea such as crab, shrimp and crawfish. This study was conducted to examine the effect of chitosan on RDPase release from renal proximal tubules. Nitric oxide (NO), highly reactive free radical, inhibits the release of RDPase from porcine proximal tubules. (omitted)

• 터널과지하공간
• /
• 제5권3호
• /
• pp.223-229
• /
• 1995

During excavation works for underground facilities, temporary tieback wall with earth anchor system was investigated for safety's sake. An excavation 9.7 meter deep was monitored by slope inclinometer in twelve measuring points. Instrumented lateral displacements of the wall during 177 days are represented. Especially, lateral displacements of the two positions under completely different condition are compared to investigate the effect of backfilling between soldier pile and the soil behind wall. The deformation behaviors of the wall according to both depth and elasped time are discussed. Finally, a numerical analysis by the program FLAC was performed, and calculated displacements are compared to measured ones.

• 대한치과의사협회지
• /
• 제20권3호통권154호
• /
• pp.233-237
• /
• 1982

A review of the literature was presented, illustrating the effect that gingivally retained orthodontic elastic bands have on the periodontal tissues. A case report was presented for treatment of mobile maxillary central incisors secondary to a subgingival elastic band. Following surgical removal of elastic band and periodontal debridement, the teeth were successfully retained with active orthodontic appliances. Until a harmless radiopaque medium can be safely incorporated into elastic bands, extreme caution in their use should be observed. Not only should all attempts be made to anchor the elastic bands to the clinical crown, but the patient should receive through instructions in their placement and removal.

• 터널과지하공간
• /
• 제13권5호
• /
• pp.362-372
• /
• 2003

시멘트가 사용된 이래로 수많은 콘크리트 구조물들이 건설되어 왔으나 그 수명은 콘크리트의 특성으로 인해 한계가 있다고 할 수 있다. 이로 인하여 불가피하게 보수 보강의 필요성이 나타나며 최근까지 많은 방법들이 개발되어 적용되고 있다. 본 연구에서는 압축공기식 치핑머신과 앵커핀을 사용하여 노후화된 콘크리트를 보수 보강하는 새로운 방법을 적용하여 노후화된 콘크리트와 신선한 콘크리트의 접합면에 대한 역학적 특성을 밝히고자 하였다. 콘크리트 노후부를 제거하기 위한 방법으로 치핑머신을 사용한 경우와 브레이커를 사용한 경우를 비교한 결과 최대점착력에서는 치핑머신이, 잔류점착력에서는 브레이커를 사용한 경우가 높게 나타났다. 접합면에 치핑머신으로 요철을 준 결과, 최대점착력은 평평한 접합면의 경우에 비하여 30 mm 요철심도에서는 14%, 50 mm에서는 22%의 증가를 보였다. 앵커핀은 잔류점착력을 증가시키고 전단파단 이후 슬립을 억제하는 효과를 보였으며, 인장강도를 32% 정도 증가시키는 효과를 나타내었다. 요철과 앵커핀을 복합적으로 적용한 결과 최대점착력은 접합면이 없는 신선한 콘크리트의 77%에 이르렀고 잔류점착력은 신선한 콘크리트의 180%에 이르는 높은 효과를 보였다.