• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.4
• /
• pp.803-807
• /
• 2018

The Fantomas and the Robin are the block ciphers included in the LS-designs, the family of block ciphers. They are designed to efficiently apply the masking technique, which is a side-channel analysis countermeasure technique, using L-boxes and S-boxes capable of bit slice implementation. In this paper, we show that the key recovery attacks of Fantomas and Robin through the related-key differential analysis are possible with $2^{56}$ and $2^{72}$ time complexity, $2^{56}$ and $2^{69}$ chosen plaintext respectively.

• Steel and Composite Structures
• /
• v.33 no.3
• /
• pp.333-346
• /
• 2019

Foam ceramic materials contribute to the explosion effect weakening on concrete structures, due to the corresponding excellent energy absorption ability. The blast resistance of concrete members could be improved through steel-foam ceramics as protective cladding layers. An approach for the modeling of dynamic response of steel-foam ceramic protected reinforced concrete (Steel-FC-RC) slabs under blast loading was presented with the LS-DYNA software. The orthogonal analysis (five factors with five levels) under three degrees of blast loads was conducted. The influence rankings and trend laws were further analyzed. The dynamic displacement of the slab bottom was significantly reduced by increasing the thickness of steel plate, foam ceramic and RC slab, while the displacement decreased slightly as the steel yield strength and the compressive strength of concrete increased. However, the optimized efficiency of blast resistance decreases with factors increase to higher level. Moreover, an efficient design method was reported based on the orthogonal analysis.

• Structural Engineering and Mechanics
• /
• v.83 no.1
• /
• pp.19-29
• /
• 2022

The angle steel frame confined concrete columns (ASFCs) are an emerging form of hybrid columns, which comprise an inner angle steel frame and a concrete column. The inner angle steel frame can provide axial bearing capacity and well confining effect for composite columns. This paper presents the experimental and theoretical studies on the seismic behaviour of ASFCs. The experimental study of the 6 test specimens is presented, based on the previous study of the authors. The theoretical study includes two parts. One part establishes the section analysis model, and it uses to analyze section axial force-moment-curvature. Another part establishes the section moment-curvature hysteresis model. The test and analysis results show that the axial compression ratio and the assembling of steel slabs influence the local buckling of the angle steel. The three factors (axial compression ratio, content of angle steel and confining effect) have important effects on the seismic behaviour of ASFCs. And the theoretical model can provide reasonably accurate predictions and apply in section analysis of ASFCs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.12
• /
• pp.4823-4827
• /
• 2014

Background: Since inconsistent results have been reported regarding the relation between the matrix metalloproteinase-2 (MMP-2) -1306C>T polymorphism and susceptibility for breast cancer, we performed a meta-analysis to investigate the issue. Materials and Methods: An internet search of PubMed and EMBASE was performed to identify eligible studies. Pooled odds ratios (ORs) with their corresponding confidence intervals (CIs) were calculated to evaluate any association between MMP-2 -1306C>T polymorphism and breast cancer susceptibility. Results: Nine case-control studies were included in the meta-analysis, involving 9,858 cases and 10,871 controls. Overall, there was no evidence of any association between the MMP-2 -1306C>T polymorphism and breast cancer susceptibility in different genetic models (T-allele vs C-allele: OR=0.95, 95%CI, 0.82-1.10, p=0.49; TT vs CC: OR=1.03, 95%CI, 0.90-1.19, p=0.66; TT+TC vs CC: OR=0.93, 95%CI, 0.78-1.10, p=0.38; TT vs TC+CC: OR=1.02, 95%CI, 0.89-1.17, p=0.77). In the subgroup analysis by ethnicity, CC was associated with a significant increase in breast susceptibility among Latin-Americans in the dominant model (OR=0.61, 95%CI, 0.40-0.93, p=0.02), but the association disappeared in other models. No significant association was observed among Europeans, East Asians and others in different genetic models. In the subgroup analysis by their source of controls, no significant association between MMP-2 -1306C>T polymorphism and breast cancer susceptibility was noted among population-based studies and hospital-based studies in different genetic models. Conclusions: The results of this meta-analysis suggest that MMP-2 -1306C>T polymorphism is not associated with breast cancer susceptibility, although the association among Latin-Americans in the dominant model was significant.

• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.823-832
• /
• 2009

In recent years, special concerns have been raised about the safety assessment of foods and food ingredients derived from genetically modified organisms (GMOs). A growing number of countries establish regulations and laws for GMOs in order to allow consumers an informed choice. In this case, a lot of methods have been developed for the detection of GMOs. However, the reproducibility among methods and laboratories is still a problem. Consequently, it is still in great demand for more effective methods. In comparison with the gel electrophoresis, the capillary electrophoresis (CE) technology has some unique advantages, such as high resolution efficiency and less time consumption. Therefore, some CE-based methods have been developed for the detection of GMOs in recent years. All kinds of CE detection methods, such as ultraviolet (UV), laser induced fluorescence (LIF), and chemiluminescence (CL) detection, have been used for GMOs detection. Microchip capillary electrophoresis (MCE) methods have also been used for GMOs detection and they have shown some unique advantages.

• Structural Engineering and Mechanics
• /
• v.43 no.1
• /
• pp.1-13
• /
• 2012

A fast precise integration method (FPIM) is proposed for solving structural dynamics problems. It is based on the original precise integration method (PIM) that utilizes the sparse nature of the system matrices and especially the physical features found in structural dynamics problems. A physical interpretation of the matrix exponential is given, which leads to an efficient algorithm for both its evaluation and subsequently the solution of large-scale structural dynamics problems. The proposed algorithm is accurate, efficient and requires less computer storage than previous techniques.

• Annals of Pediatric Endocrinology and Metabolism
• /
• v.23 no.4
• /
• pp.182-195
• /
• 2018

Increasing prevalence of childhood obesity poses threats to the global health burden. Because this rising prevalence cannot be fully explained by traditional risk factors such as unhealthy diet and physical inactivity, early-life exposure to endocrine disrupting chemicals (EDCs) is recognized as emerging novel risk factors for childhood obesity. EDCs can disrupt the hormone-mediated metabolic pathways, affect children's growth and mediate the development of childhood obesity. Many organic pollutants are recently classified to be EDCs. In this review, we summarized the epidemiological and laboratory evidence related to EDCs and childhood obesity, and discussed the possible mechanisms underpinning childhood obesity and early-life exposure to non-persistent organic pollutants (phthalates, bisphenol A, triclosan) and persistent organic pollutants (dichlorodip henyltrichloroethane, polychlorinated biphenyls, polybrominated diphenyl ethers, per- and polyfluoroalkyl substances). Understanding the relationship between EDCs and childhood obesity helps to raise public awareness and formulate public health policy to protect the youth from exposure to the harmful effects of EDCs.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1832-1842
• /
• 2014

A novel probabilistic small signal stability analysis (PSSSA) method considering load correlation is proposed in this paper. The superiority Latin hypercube sampling (LHS) technique combined with Monte Carlo simulation (MCS) is utilized to investigate the probabilistic small signal stability of power system in presence of load correlation. LHS helps to reduce the sampling size, meanwhile guarantees the accuracy and robustness of the solutions. The correlation coefficient matrix is adopted to represent the correlations between loads. Simulation results of the two-area, four-machine system prove that the proposed method is an efficient and robust sampling method. Simulation results of the 16-machine, 68-bus test system indicate that load correlation has a significant impact on the probabilistic analysis result of the critical oscillation mode under a certain degree of load uncertainty.

• Structural Engineering and Mechanics
• /
• v.51 no.6
• /
• pp.923-937
• /
• 2014

The rational finite element method is different from the standard finite element method, which is constructed using basic solutions of the governing differential equations as interpolation functions in the elements. Therefore, it is superior to the isoparametric approach because of its obvious physical meaning and accuracy; it has successfully been applied to the isotropic elasticity problem. In this paper, the formulation of rational finite elements for plane orthotropic elasticity problems is deduced. This method is formulated directly in the physical domain with full consideration of the requirements of the patch test. Based on the number of element nodes and the interpolation functions, different approaches are applied with complete polynomial interpolation functions. Then, two special stiffness matrixes of elements with four and five nodes are deduced as a representative application. In addition, some typical numerical examples are considered to evaluate the performance of the elements. The numerical results demonstrate that the present method has a high level of accuracy and is an effective technique for solving plane orthotropic elasticity problems.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.142-156
• /
• 2015

A new method for ship Inner Shell optimization, which is called Parametric Inner Shell Optimization Method (PISOM), is presented in this paper in order to improve both hull performance and design efficiency of transport ship. The foundation of PISOM is the parametric Inner Shell Plate (ISP) model, which is a fully-associative model driven by dimensions. A method to create parametric ISP model is proposed, including geometric primitives, geometric constraints, geometric constraint solving etc. The standard optimization procedure of ship ISP optimization based on parametric ISP model is put forward, and an efficient optimization approach for typical transport ship is developed based on this procedure. This approach takes the section area of ISP and the other dominant parameters as variables, while all the design requirements such as propeller immersion, fore bottom wave slap, bridge visibility, longitudinal strength etc, are made constraints. The optimization objective is maximum volume of cargo oil tanker/cargo hold, and the genetic algorithm is used to solve this optimization model. This method is applied to the optimization of a product oil tanker and a bulk carrier, and it is proved to be effective, highly efficient, and engineering practical.