• Physical Therapy Korea
• /
• v.9 no.1
• /
• pp.81-96
• /
• 2002

The purpose of this research was to determine the effects on the healing of fibular fractures in rabbits of low-intensity pulsed ultrasound (50 $mW/cm^2$ and 500 $mW/cm^2$) applied for periods of 4, 14 and 24 days following fibular osteotomy. Thirty-six male Japanese white rabbits were randomly divided into three groups of twelve for three treatment protocols: (1) ultrasound treatment at intensities of 50 $mW/cm^2$ and 500 $mW/cm^2$ until the 4th day following fibular osteotomy, (2) ultrasound treatment at intensities of 50 $mW/cm^2$ and 500 $mW/cm^2$ until the 14th day following fibular osteotomy, and (3) ultrasound treatment at intensities of 50 $mW/cm^2$ and 500 $mW/cm^2$ until the 24th day following fibular osteotomy. The low-intensity pulsed ultrasound was applied to only one fibula of each rabbit (these served as the experimental group). The other fibula of each rabbit served as the control group. The selection of which fibula was to be treated was made randomly. The animals were sacrificed on the 4th, 14th and 24th day after the start of ultrasound treatments. Percent of trabecular bone area and fibular radiography were carried out to compare the degree of fibular bone healing. A microscope was also used to determine any histologic changes. For statistical differences in radiological changes due to length of treatment period (4, 14 and 24 days respectively), the Wilcoxon signed-ranks test was used to compare the experimental and control groups. For statistical differences in fracture healing due to differences in ultrasound intensity, radiological studies were compared using the Mann-Whitney Test. And, to compute percentage differences in areas of trabecular bone, Two-way analysis of variance (ultrasound intensity x each group) was used. Experiment results were as follows: 1. In animals sacrificed on the 4th day, no difference was found in the radiological studies of the fibulae in the experimental and control groups (p>.05). However, experimental groups showed more rapid bone repair than control group. 2. Both radiographic and percent of trabecular bone area studies showed significant differences in rabbits sacrificed after 14 days. Fracture healing was significantly increased in the experimental group (p<.05) 3. In the animals sacrificed on the 24th day, histologic study showed rapid bone repair but fibular radiologic studies did not show statistical differences between the two groups (p>.05). 4. On the 14th day, bone union on radiograph was significantly more rapid in the treatment group with pulsed ultrasound of 50 $mW/cm^2$ than the group with 500 $mW/cm^2$ (p<.05). Histologic studies showed that both the 14 and 24 days groups had more rapid bone repair in animals treated with 50 $mW/cm^2$ ultrasound intensity than those treated with 500 $mW/cm^2$ intensity. In conclusion, it has been shown that the low-intensity pulsed ultrasound has a positive effect on bone fracture healing in the early stage and the range of pulse ultrasound from 50 $mW/cm^2$ to 500 $mW/cm^2$ is effective for fracture healing. Further study is needed to investigate the influence of pulsed ultrasound on delayed union and non-union in bone fractures and also for the clinical use of low-intensity pulsed ultrasound for bone healing in humans.

• KDI Journal of Economic Policy
• /
• v.13 no.4
• /
• pp.3-30
• /
• 1991

This paper examines Korea's exports of manufactures to the United States, Japan, and other OECD member countries in the 1974-89 period, focusing on the market share in the trade partners' imports. It decomposes the growth of exports into various effects, following the "constant-market-shares" analysis. For this purpose, the entire period is divided into three subperiods: 1974-78, 1978-83, and 1983-89. The paper also estimates a regression model of the market share determination, using the data of Korea's market share in U.S. imports. In the three subperiods under study, Korea's exports grew at different paces for varied reasons. The average annual growth rate was 28 %, 11 %, and 21 %, respectively. A large drop in the "competitiveness effect", that is, in the market-share growth rate, was mainly responsible for the decline in the export growth rate. The largest drop in the competitiveness effect was found in the light manufactures exports in the second period. The market share did not regain the rapid growth momentum. The main reason for the rise in export growth rate in the last subperiod was the "market-size effect"-a rise in the growth rate of the trade partners' imports. According to the regression results, high intensities in physical and human capital tended to lower the Korean manufacturing industries' market shares in the United States. This negative correlation was stronger in the case of human capital intensity, suggesting that Korea is relatively poorer in human capital endowment than in physical capital endowment when compared to the United States. This negative correlation between the market share and each of the two intensities became weaker overtime. This may be interpreted as the consequence of both physical and human capital accumulation which were faster than the labor force growth. Depreciation of the Japanese yen was estimated to have a negative influence on the Korean manufacturing industries' market share in the United States, and this negative influence became stronger each year in the 1980s. This seems to reflect the intensifying competition between the two countries' exports in U.S. import markets. The Heavy and Chemical Industry Policy of the 1970s, which promoted a number of selected industries by providing them with various incentives and inevitably discriminated against the rest of the industries, was estimated to have had strong negative effects on the export performance of the light manufacturing industries. This finding and the largest decline in the "competitiveness effect" -found in the light manufactures exports in the 1978-83 period-indicate that the Heavy and Chemical Industry Policy was mainly accountable for the drop in the export growth rate during the period. On the other hand, the rise in export growth rate during the subsequent subperiod was greatly impacted by the large scale exchange rate realignments of major currencies, especially by the appreciation of the Japanese yen, and other changes in international economic conditions.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.1
• /
• pp.87-111
• /
• 2011

The purpose of this study was to develop and evaluate practical problem-based Home Economics lesson plans applying to the multiple intelligence teaching learning strategy, focused on the unit 'Nutrition & Meals' of middle school Home Economics subject matter. To achieve this purpose, the lesson plans were developed and evaluated from the 72 middle school students in Chongju after implementing the instruction. The data from the questionnaire were analyzed by SPSS/WIN 12.0 and content analysis. The results were as follows: First, the objectives of practical problem-based 'Nutrition & Meals' Instruction using multiple intelligence teaching strategy were to understand the importance of nutrition and health in an adolescent period and to develop good eating habits. The Practical Problem was 'What should I do for good eating habits?' and the learning contents were healthy life, the kinds and functions of nutriments, food pyramid and a food guide. The learning activities were progressed by various types of teaching and learning methods including 8 types of multiple intelligence teaching strategy. The lesson plans were developed according to the process of practical problem solving model. 6 periods of lesson plans and worksheets were developed. Second, the practical problem-based instruction using multiple intelligence teaching-learning strategy were evaluated to increase students' positive learning attitudes, motivation, and good eating habits.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.421-426
• /
• 2015

The objective of this paper is to look into the growth of Cryptomeria japonica stand in South Korea along with the evaluation on their yields, followed by their carbon stocks and removals. A total of 106 sample plots were selected from Jeonnam, Gyeongnam, and Jeju, where the groups of standard are grown. We only used 92 plots data except outlier. As part of the analysis, the Weibull diameter distribution was applied. In order to estimate the diameter distribution, the growth estimation equation for each of the growth factors including the height, the diameter at breast height, and the basal area was drafted out and the verification for each equation was examined. The site index for figuring out the forest productivity of Cryptomeria japonica stand for each district was also developed as a Schumacher model and 30yr was used as a reference age for the estimation of the site index. It was found that the site index for Cryptomeria japonica stand in South Korea ranges from 10 to 16 and this result was used as a standard for developing the stand yield table. According to the site 14 in the stand yield table, the mean annual increment (MAI) of the Cryptomeria japonica reaches $7.6m^3/ha$ on its 25yr and its growing stock is estimated to be at $190.1m^3/ha$. This volume is about $20m^3$ as high as that of the Chamaesyparis obtusa. Furthermore, the annual carbon absorptions for a Cryptomeria japonica stand reached the peak at 25yr, which is 2.14 tC/ha/yr, $7.83tCO_2/ha/yr$. When compared to the other conifers, this rate is slightly higher than that of a Chamaecyparis obtusa ($7.5tCO_2/ha/yr$) but lower than that of the Pinus koraiensis ($10.4tCO_2/ha/yr$) and Larix kaempferi ($11.2tCO_2/ha/yr$). With such research result as a base, it is necessary to come up with the ways to enhance the utilization of Cryptomeria japonica as timbers, besides making use of their growth data.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1249-1256
• /
• 2016

Black ginseng (BG) obtained by a 9-fold steaming process of Panax ginseng has been reported to have anti-oxidative, anti-obesity, and anti-diabetes effects. The current study evaluated the protective effect of BG by steaming time in an HCl/ethanol-induced acute gastritis model. BG was divided into four samples according to steaming-drying processing (Gin1, Gin3, Gin6, and BG). High performance liquid chromatography analysis, free radical scavenging activity, and total phenol and flavonoid contents were examined in ginseng and four BG samples. Compared with ginseng, BG showed a stronger radical scavenging effect and higher contents of total phenol and flavonoids. To evaluate the anti-gastritic effect of BG, mice were distributed into five groups: normal mice (N), acute gastritic mice with distilled water (CON), acute gastritic mice with 100 mg/kg of ginseng (Gin0), acute gastritic mice with 100 mg/kg of BG (BG), and acute gastritic mice with 10 mg/kg of sucralfate (SC). After 1 hour of pre-treatment with water, extracts (Gin0 and BG), or drug (SC), experimental groups except for N were orally administered 0.5 mL of 150 mM HCl/60% ethanol (v/v) mixture. Blood was collected 1 hour later from the heart, and gastric tissue was harvested. Reactive oxygen species (ROS) levels were measured in serum, and related protein expression was examined by Western blot assay. In HCl/ethanol-induced acute gastritic mice, treatment with ginseng or BG improved mucosal damage in the histological evaluation. The serum ROS level significantly decreased in the BG-treated group compared with the CON group. Furthermore, expression of inflammatory cytokines significantly decreased in the BG-treated group compared with the CON group. Based on these results, antioxidant and anti-gastritic activities of ginseng were enhanced by streaming-drying processing, in part due to an increase in biological active compounds.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.91-99
• /
• 2013

This research analyzed surplus solar energy in Venlo-type greenhouse using acquired typical meteorological year (TMY) data for designing a heat storage system for the surplus solar energy generated in the greenhouse during the day. In the case of paprika, the region-dependent heating loads for Jeju, Jinju, and Daegwanryong area were approximately 1,107.8 GJ, 1,010.0 GJ, and 3,118.5 GJ, respectively. The surplus solar energy measured in Jeju area was 1,845.4 GJ, Jinju area 1,881.8 GJ, and Daegwanryong area 2,061.8 GJ, with the Daegwanryong area showing 11.7% and 9.6% higher than the Jeju region and Jinju region respectively. In the case of chrysanthemums, regional heating loads were determined as 1,202.5 GJ for the Jeju region, 1,042.0 GJ for the Jinju region, and 3,288.6 GJ for the Daegwanryong region; the regional differences were similar to those for paprika. The recorded surplus solar energy was 1,435.2 GJ, 1,536.2 GJ, and 1,734.6 GJ for Jeju, Jinju, and Daegwanryong region, respectively. The Daegwanryong region recorded heating loads 20.9% and 12.9% higher than in the Jeju and Jinju region, respectively. From the above, it can be said that cultivating paprika, compared to cultivating chrysanthemums, requires less heating energy regardless of the region and tends to yield more surplus solar energy. Moreover, if the Daekwan Pass region is excluded, the surplus solar energy exceeds the energy required for heating. Although the required heating energy differs according to regions and crops, cucumbers were found to require the highest amount, followed by chrysanthemum and paprika. The amount of surplus solar energy was the highest in the case of paprika, followed by cucumber and chrysanthemum.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.4
• /
• pp.95-111
• /
• 2015

This purpose of this study is to academically define what "luxury products" mean, and to clarify the cognitive structural relationship between product attributes and "luxuriousness" in relation to the determinant of luxuriousness that eventually affects the purchase intention of consumers. This study is also written under the theory that luxuriousness leads to benefits such as functional benefit, experiential benefit, symbolic benefit, and exclusive benefit; which all provide core values to consumers and serve as effect factors that influence the psychological satisfaction of consumers. The commonly discussed measure of the determinant of luxuriousness has often failed to adequately describe the reasons to why the consumers prefer luxury products. This study also aims to suggest a new path in how and what the consumers perceive as luxury products, and to conceptualize what luxuriousness means in the marketing perspectives on the background of a previous theory. The part of product attributes are divided in the following sections: the quality and design of functional cues and brands of symbolic cues, as well as prices. The part of the determinant of luxuriousness is divided in sections of superiority, scarcity, differentiation, and traditionality. Therefore, this study used the theoretical concept used in such common measures as well as 282 examples to empirically analyze the relationship between product attributes and luxuriousness of luxury products, and how such affect the purchase intentions of consumers. The survey used to aid this study targeted luxury product consumers regarding "B" brand of automobiles. Using the analysis through a structural equation model, the study draws a conclusion that in a relationship between product attributes and luxuriousness, quality(which is one of the functional cues) affects the facts of superiority, differentiation in a significant way, and design affects the factors of scarcity in a significant way. And brand(one of the symbolic cues) significantly affects the factors of traditionality within the luxuriousness factors, and price appeared to affect superiority and scarcity. Additionally, the brand of product attributes significantly affects purchase intention, and superiority and scarcity of luxuriousness affects purchase intention in a significant way. The structural concept of luxury and luxuriousness suggested in the study will provide the theoretical basis for building a new case study, and the determinants of luxuriousness in the marketing perspective will be a practical help for checking the consumers' psychological reasons for purchase.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.5
• /
• pp.245-259
• /
• 2020

The development of technology and the advent of a non-face-to-face society are expected to have a direct impact on job problems. In line with this phenomenon, the government and education and training institutions are coping with job problems through the start-up support policy while at the same time inducing the creation of innovative companies. In particular, youth start-up support can be expected not only to compensate for market failures, but also to promote high-growth start-ups. Based on this background of research, this study examined the competency of young entrepreneurs to start their own businesses, their entrepreneurial self-efficacy, and their impact on success and satisfaction of start-ups. Based on the theoretical research, the research theory and research model were derived by setting entrepreneurial self-efficacy as a mediating variable after reviewing the relation between the main elements of start-up competency of young start-up entrepreneurs and start-up performance. The Youth Entrepreneurship Competency was divided into four categories: Entrepreneurial Competencies, Technical Competencies, Management Competencies, and Creative Competencies, and the hypothesis was that each had a significant impact on the start-up performance through the mediating effect of entrepreneurial self-efficacy. A survey was conducted on young entrepreneurs in their 20s and 30s in Korea for empirical research, and the analysis results were as follows. First of all, the competency of young entrepreneurs to start their own businesses affects the success of start-ups and the satisfaction of start-ups. There are differences in the competencies, and both technical and management competencies can be seen through the entrepreneurial self-efficacy to enhance the success of start-ups and the satisfaction of start-ups. Entrepreneurial competency was fully mediated to start-up success and partially mediated to start-up satisfaction. In the case of creative competency, there were only direct effects on successful start-ups, and the satisfaction of start-ups showed partial mediating effects. Thus, seven of the eight detailed hypotheses were supported and one was rejected. Based on the above findings, the implications were presented.

• Asia pacific journal of information systems
• /
• v.23 no.3
• /
• pp.131-154
• /
• 2013

New internet technologies have created a revolutionary new platform which allows consumers to make decision about product price and quality quickly and provides information about themselves through the transcript of online reviews. By expressing their feelings toward products or services on virtual opinion platforms, users extend their influence into cyberspace as electronic word-of-mouth (e-WOM). Existing research indicates that an impact of eWOM on the consumer decision process is influential. For both academic researchers and practitioners, investigating this phenomenon of information sharing in online website is essential given the increasing number of consumers using them as sources of purchase decisions. It is worthwhile to examine the extent to which opinion seekers are willing to accept and adopt online reviews and which factors encourage adoption. Discerning the most motivating aspects of information adoption in particular, could help electronic marketers better promote their brand and presence on the internet. The objectives of this study are to investigate how online WOM influences a persons' purchase decision by discovering which factors encourage information adoption. Especially focused on the self-efficacy, this research investigates how self-efficacy affects on information usefulness and adoption of online information. Although people are exposed to same review or comment about product or service, some accept the reviews while others do not. We notice that accepting online reviews mainly depends on the person's preference or personal characteristics. This study empirically examines this issue by using cognitive dissonance theory. Specifically, in the movie industry, we address few questions-is always positive WOM generating positive effect? What if the movie isn't the person's favorite genre? What if the person who is very self-assertive so doesn't take other's opinion easily? In these cases of cognitive dissonance, is always WOM generating same result? While many studies have focused on one direct of WOM which indicates positive (or negative) informative reviews or comments generate positive (or negative) results and more (or less) profits, this study investigates not only directional properties of WOM but also how people change their opinion towards product or service positive to negative, negative to positive through the online WOM. An experiment was conducted quantitatively by using a sample of 168 users who have experience within the online movie review site, 'Naver Movie'. Users were required to complete a survey regarding reviews and comments taken from the real movie page. The data reflected user's perceptions of online WOM information that determined users' adoption level. Analysis results provide empirical support for the proposed theoretical perspective. When user can't agree with the opinion of online WOM information, in other words, when cognitive dissonance between online WOM information and users' preference occurs, perceived self-efficacy significantly decreases customers' perception of usefulness. And this perception of usefulness plays an important role in determining users' intention to adopt online WOM information. Most of researches have been concentrated on characteristics of online WOM itself such as quality or vividness of information, credibility of source and direction of online WOM, etc. for describing effect of online WOM, but our results suggest that users' personal character (e.g., self-efficacy) plays decisive role for acceptance of online WOM information. Higher self-efficacy means lower possibility to accept the information that represents counter opinion because of cognitive dissonance, whereas the people that have lower self-efficacy are willing to accept the online WOM information as true and refer to purchase decision. This study suggests a model for understanding role of direction of online WOM information. Also, our result implicates the importance of online review supervision and personalized information service by confirming switching opinion negative to positive is more difficult than positive to negative through the online WOM information. This implication would help marketers to manage online reviews of their products or services.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.155-161
• /
• 2018

In this study, we analyze the growth environment using smart farm technology in order to develop the optimal growth model for the precision cultivation of the bottle-grown oyster mushroom 'Suhan'. Experimental farmers used $88m^2$ of bed area, 2 rows and 5 columns of shelf shape, 5 hp refrigerator, 100T of sandwich panel for insulation, 2 ultrasonic humidifiers, 12 kW of heating, and 5,000 bottles for cultivation. Data on parameters such as temperature, humidity, carbon dioxide concentration, and illumination, which directly affect mushroom growth, were collected from the environmental sensor part installed at the oyster mushroom cultivator and analyzed. It was found that the initial temperature at the time of granulation was $22^{\circ}C$ after the scraping, and the mushroom was produced and maintained at about $25^{\circ}C$ until the bottle was flipped. On fruiting body formation, mushrooms were harvested while maintaining the temperature between $13^{\circ}C$ and $15^{\circ}C$. Humidity was approximately 100% throughout the growth stage. Carbon dioxide concentration gradually increased until 3 days after the beginning of cultivation, and then increased rapidly to approximately 2,600 ppm. From the 6th day, $CO_2$ concentration was gradually decreased through ventilation and maintained at 1,000 ppm during the harvest. Light was not provided at the initial stage of oyster mushroom cultivation. On the $3^{rd}$ and $4^{th}$ day, mushrooms were irradiated by 17 lux light. Subsequently, the light intensity was increased to 115-120 lux as the growth progressed. Fruiting body characteristics of 'Suhan' cultivated in a farmhouse were as follows: Pileus diameter was 30.9 mm and thickness was 4.5 mm; stipe thickness was 11.0 mm and length was 76.0 mm; stipe and pileus hardness was 0.8 g/mm and 2.8 g/mm, respectively; L values of the stipe and pileus were 79.9 and 52.3, respectively. The fruiting body yield was 160.2 g/850 ml, and the individual weight was 12.8 g/10 unit.