• 경영과학
• /
• 제25권1호
• /
• pp.139-147
• /
• 2008

Conjoint Analysis is marketers' favorite methodology for finding out how buyers make trade-offs among competing products and suppliers. Thousands of applications of conjoint analysis have been carried out over the past three decades. The conjoint analysis has been so popular as a management decision tool due to the availability of a choice simulator. A conjoint simulator enables managers to perform 'what if' question accompanying the output of a conjoint study. Traditionally the First Choice Model (FCM) has been widely used as a choice simulator. The FCM is simple to do, easy to understand. In the FCM, the probability of an alternative is zero until its value is greater than others in the set. Once its value exceeds that threshold, however, it receives 100%. The LOGIT simulation model, which is also called as "Share of Preference", has been used commonly as an alternative of the FCM. In the model part worth utilities aren't required to be positive. Besides, it doesn't require part worth utilities computed under LOGIT model. The simulator can be used based on regression, monotone regression, linear programming, and so on. However, it is not free from the Independent from Irrelevant Alternatives (IIA) problem. This paper proposes the EBA (Elimination-By-Aspects) model as a useful conjoint-like method. One advantage of the EBA model is that it models choice in terms of the actual psychological processes that might be taking place. According to EBA, when choosing from choice objects, a person chooses one of the aspects that are effective for the objects and eliminates all objects which do not have this aspect. This process continues until only one alternative remains.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.309-310
• /
• 2009

본 연구는 잠실제2롯데월드 초고층 건축 프로젝트의 기둥축소량에 필요한 첫 번째 단계인 재료연구(일명 콘크리트 테스트 프로그램)의 일환으로 진행되고 있다. 현재까지 18개월간의 크리프 및 건조수축 측정결과가 확보되어 있으며 이에 대한 강도와 하중재령별로 분석을 실시하였고 추가적으로 회기분석을 실시하여 예측모델식에 따른 유도식을 제안하였다. 비교분석 시 사용된 예측 모델식은 ACI209R Model, Bazant-Baweja B3 Model, CEB MC99 Model, 및 GL2000 Model 등과 같이 네 가지 의 모델식을 활용하였다. 결과분석항목은 실무에서 활용되고 있는 전체 건조수축 변형과 단위 응력당 전체 크리프 변형(Compliance)에 대해서 실시하였다.

• Structural Engineering and Mechanics
• /
• 제37권2호
• /
• pp.197-213
• /
• 2011

Concrete is a heterogeneous material exhibiting quasi-brittle behaviour. While homogenization of concrete is commonly accepted in general engineering applications, a detailed description of the material heterogeneity using a mesoscale model becomes desirable and even necessary for problems where drastic spatial and time variation of the stress and strain is involved, for example in the analysis of local damages under impact, shock or blast load. A mesoscale model can also assist in an investigation into the underlying mechanisms affecting the bulk material behaviour under various stress conditions. Extending from existing mesoscale model studies, where use is often made of specialized codes with limited capability in the material description and numerical solutions, this paper presents a mesoscale computational model developed under a general-purpose finite element environment. The aim is to facilitate the utilization of sophisticated material descriptions (e.g., pressure and rate dependency) and advanced numerical solvers to suit a broad range of applications, including high impulsive dynamic analysis. The whole procedure encompasses a module for the generation of concrete mesoscale structure; a process for the generation of the FE mesh, considering two alternative schemes for the interface transition zone (ITZ); and the nonlinear analysis of the mesoscale FE model with an explicit time integration approach. The development of the model and various associated computational considerations are discussed in this paper (Part 1). Further numerical studies using the mesoscale model for both quasi-static and dynamic loadings will be presented in the companion paper (Part 2).

• 드라이브 ㆍ 컨트롤
• /
• 제15권2호
• /
• pp.1-8
• /
• 2018

This study is a first step toward reducing surge pressure, and it has another purpose, which is to developing an analysis model which can closely analyze a hydraulic circuit and be used in design. For development of analysis model, SimulationX, a commercial program, is used. The study progress methods are as follows. By analyzing the structure and operating mechanisms of each part of the hydraulic system of the pump truck and referring its parameters, develop a single component model. Assemble the developed single component model, and make an overall analysis the model. By comparing the similarities between the developed model and the actual system's test results, validate the reliability of the analysis model.

• 환경영향평가
• /
• 제23권3호
• /
• pp.187-196
• /
• 2014

The objective of this study is to evaluate and analyze Osu stream watershed water environment system. The data were collected from January 2009 to December 2011 including water temperature, pH, DO, EC, BOD, COD, TOC, SS, T-N, T-P and discharge. The data were used for principle component analysis and factor analysis. The results are as followes. The primary factors obtained from both the principal component analysis and the factor analysis were BOD, COD, TOC, SS and T-P. Once principal component analysis and factor analysis have been performed with the collected data and then the results will be applied to both simple regression model and multiple regression model. The regression model was developed into case 1 using concentrations of water quality parameters and case 2 using delivery loads. The value of the coefficient of determination on case 1 fell between 0.629 and 0.866; this was lower than case 2 value which fell between 0.946 and 0.998. Therefore, case 2 model would be a reliable choice.The coefficient of determination between the estimated figure using data which was developed to the regression model in 2012 and the actual measurement value was over 0.6, overall. It can be safely deduced that the correlation value between the two findings was high. The same model can be applied to get TOC concentrations in future.

• 융합신호처리학회논문지
• /
• 제14권2호
• /
• pp.105-109
• /
• 2013

There are the free space model, the direct-path and ground reflected model, Egli model, Okumura-Hata model in the representative propagational models. The measured results at the area of PNG area were used as the experimental data in this paper. The new proposed partial interval analysis method is applied on the measured propagation data in the cellular band. The interval for the analysis is divided from the entire 30 Km distance to 5 Km, and next to 1 Km. The best-fit propagation models are chosen on all partial intervals. The means and standard deviations are calculated for the differences between the measured data and all partial interval models. By using the 5 Km- or 1 Km- partial interval analysis, the standard deviation between the measured data and the partial propagation models was improved more than 1.7 dB.

• 산업경영시스템학회지
• /
• 제36권4호
• /
• pp.77-83
• /
• 2013

This study is to develop a mathematical analysis model to grasp the behaviors of cartels. Cartels are formed tacitly and cause tremendous damage to consumers in modern society which is composed of advanced industry structure. The government authorities have instituted the leniency programs to respond cartels. However, cartels will continue unless there are legal sanctions against cartels based on an accurate analysis of leniency programs. The proposed cartel equilibrium analysis model is a mathematical behavior model which is based on the existing methods and the prison's dilemma of game theory. Therefore, the model has a form of pay off matrix of two players. We use a iterated polymatrix approximation (IPA) method to deduct a Nash equilibrium point. The model is validated by an empirical analysis as well.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.478-479
• /
• 2009

The HEMU-400X(High-speed Electric Multiple Unit 400km/h eXperimental) project starts in 2007. It is required to analysis and simulate the train performance throughout the project life cycle for a successful completion of the project. This paper is devoted to the development of a train performance analysis model for the high-speed electric multiple unit 400km/h experimental. The model consist of running resistance model, train model, traction model and braking model. So, this paper represents the results of the train performance analysis.

• 한국군사과학기술학회지
• /
• 제10권4호
• /
• pp.38-51
• /
• 2007

This paper describes research results for the measurement and analysis method of magnetic signatures generated from the ship's magnetic mock-up model. In this paper, we present the theoretical and experimental techniques for the separation of the permanent and the induced magnetic field from the measured magnetic signature of the mock-up model. Also, we describe the prediction method of the induced magnetic field generated from mock-up model using the Magnet s/w, one of the FEM analysis tools for the electro-magnetic field and the magnetic dipole modelling method based on the least square techniques. The proposed modelling and analysis methods can be used for the prediction and the analysis of the static magnetic field generated from the real naval ship as well as the mock-up model.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.220-227
• /
• 2002

This paper describes an integrated approach process to carry out pre-test, model correlation and updating analysis on the sub-frame of a vehicle. In this study, it was found that the modal test could be more efficient when the exciting point was selected on the area with high driving point residue. Such area could be located with the aid of finite element modal analysis. The model correlation was appraised in conjunction with the modal parameters between modal test and finite elements analysis. Also, the finite element model updating was obtained the good resultant using the iteration method based on sensitivity analysis results that carried out the variation of natural frequencies and MAC for the material properties. Finally, optimization of vehicle subframe was carried out the analysis of core location and physical properties by tow steps.