• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.1
• /
• pp.16-22
• /
• 2003

While passing through the AC/DC section insulators installed at electric railroad catenary, some electric trains undergo mis-operation of main circuit breaker after AC/DC change-over operation. This paper provides insulation resistance measurements of AC/DC section insulators, which confirm the insulation levels of section insulators are below the standard of insulators. The insulation deterioration and pantograph arrangement on the electric train can produce voltage impression on section insulator which induces mis-operation of main circuit breaker To mitigate the insulation deterioration of the section insulator installed at underground railroads, the section insulators have been cleaned periodically, but section insulator structure should be modified to make the section insulator performance perfect. Based on the above analysis, effective modification method of AC/DC section insulator is provided.

• Structural Engineering and Mechanics
• /
• v.73 no.1
• /
• pp.75-82
• /
• 2020

In this study, the problem of torsion of bars with open cross section surrounded by corrugated boundaries is analyzed. An approximate analytical solution is given using perturbation technique. First, the stress analysis for circular open cross-section for arbitrary opening angle is formulated and the problem is analytically solved. Second, the open cross-section with corrugated cross section is analyzed using perturbation method. First order contributions to the stresses and the torques have been added. The results have been exemplified and compared by considering special examples.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.115-118
• /
• 1999

The twisting and bending extrusion process is developed by the $DEFORM^TM$-3D. Because the rectangular section of the extruded product has the symmetry line of cross-section area, the twisting and the bending of extruded product has not occurred. The product with the rectangular section is applied to the twisting and bending extrusion process through the twisted die surface and eccentricity die section. It is shown that the twisting of extruded product is caused by the twisted die surfaces and the bending of extruded product is causd by the eccentricity between the die section. The results by the analysis show that the twisting angle and the curvature of extruded products increases by the die twisting angle, the eccentricity, but decreases by the die length, and friction condition

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.16-24
• /
• 2007

The high-frequency analysis method of back-scattering cross section spectrum of rotating targets is established. The time history of the back-scattering cross section is calculated using a quasi-stationary approach, based on a physical optics and a physical theory of diffraction, combining an adaptive triangular beam method to consider the shadow effect. And the spectra of back-scattering cross section by the Doppler effect are analyzed applying a simple fast Fourier transform method to its time history. The numerical calculation for rotating targets, such as rotating metal plates and underwater propeller, are carried out. The time history appears to be periodic with respect to the number of wings. The backscattering cross section spectrum level and its frequency shift are dependent on the rotating speed, direction, and the shape of the targets.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.137-139
• /
• 2003

As a part of numerical and experimental research works for the prediction and improvement of ship's maneuvering performance, a study on the performance analysis of two different rudders has been carried out. While the planform shape and the aspect ratio of the rudders have been fixed, section shape has been changed. Conventional type of HMRI NP section and special type of dolphin-tail section have been employed. Performances of the rudders have been investigated by using CFD and compared with experimental data obtained in a wind tunnel. A commercial CFD program has been used to solve the RANS equations. Two-equation k-ro model has been applied to close the governing equations. Block-structured grids are used in the numerical calculation. Based upon the calculation results, the rudder with dolphin-tail section has shown a possibility of significantly improving rudder performance if utilized as the section of ship rudders.

• Journal of Navigation and Port Research
• /
• v.40 no.2
• /
• pp.67-72
• /
• 2016

Vietnam's sea-port industry has experienced a significant development in recent years. Especially in Northern Vietnam, both the demand and supply of handling services for containerized cargoes have increased at a considerable rates. Accompany with such movement, the competition among container terminals in the area becomes fiercer. In this paper, Hierarchical Cluster Analysis is employed to classify all 11 container terminals in Northern Vietnam by collecting data concerning terminal competitiveness. After the classification, each group will be discussed in order to reveal more details about their competitive characteristics. The paper consists of five sections. Section 1 is the general introduction. Section 2 provides a general literature review about competitiveness and factors to evaluate competitiveness. Section 3 explains variables and methodology applied to do the analysis. Section 4 presents the results with linkage to the current condition. Section 5 summarizes the analysis results. It is shown that container terminals in Northern Vietnam should not only pay attention to their service qualities but also have to find out an appropriate mechanism to avoid unhealthy competition. The paper is expected to contribute a background for further researches in container terminals' competition in the region as well as hints for operators in planning and making decisions.

• Steel and Composite Structures
• /
• v.45 no.2
• /
• pp.219-230
• /
• 2022

The aim of this paper is to study the mechanical behaviors of the cold-formed thin-walled steel and reinforced concrete sandwich composite slab (CTS&RC-SCS) under vertical loads and to develop the calculation methods of its flexural bearing capacity and section stiffness. Two CTS&RC-SCS specimens were designed and manufactured to carry out the static loading test, and meanwhile, the numerical simulation analyses based on finite element method were implemented. The comparison between experimental results and numerical analysis results shows that the CTS&RC-SCS has good flexural capacity and ductility, and the accuracy and rationality of the numerical simulation analysis are verified. Further, the variable parameter analysis results indicate that neither increasing the concrete strength grade nor increasing the thickness of C-sections can significantly improve the flexural capacity of CTS&RC-SCS. With the increase of the ratio of longitudinal bars and the thickness of the composite slab, the flexural capacity of CTS&RC-SCS will be significantly increased. On the basis of experimental research and numerical analysis above, the calculation formula of the flexural capacity of CTS&RC-SCS was deduced according to the plastic section design theory, and section stiffness calculation formula was proposed according to the theory of transformed section. In terms of the ultimate flexural capacity and mid-span deflection, the calculated values based on the formulas and the experimental values are in good agreement.

• Proceedings of the Zoological Society Korea Conference
• /
• 2001.10a
• /
• pp.259.2-259
• /
• 2001

No Abstract, See Full Text

• Proceedings of the Zoological Society Korea Conference
• /
• 2001.04a
• /
• pp.91.2-91
• /
• 2001

Allelic ladders ; DNA profiling ; Koreans ; STRs ; Y-chromosome haplotypes

• Fashion & Textile Research Journal
• /
• v.2 no.4
• /
• pp.360-365
• /
• 2000

This research is the trial for the computation of the ease-rate for the bodice pattern. The result of the analysis about the cross section figures of garment space by using a 3-D measuring instrument is that: The garment space of each bodice by each body size is definite. In the figure of cross section of the basic lines, an area of cross section of garment space and length of cross section of garment space are not increased in proportion to an area of cross section of the body. The ease rate is the same no matter that flat-rate of the body is same or different. The ease-rate is computed by length of cross section of garment space that is in proportion to the radius of the body.