• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.577-585
• /
• 2006

In this research, nonlinear Timoshenko beam element that is able to capture nonlinear shear deformation is developed. The proposed model shows more reasonable prediction than Bernoulli beam theory in short columns or strong shear column due to the consideration of shear deformation. The cross-section is modeled as fiber approach. Since the model is based on the fiber approach for section discretization, the plastic progress of the section can be traced and the coupling effect of the axial and flexural response. The developed element is implemented into the finite element program to analysis general reinforced concrete structures. As parametric study, reinforced concrete columns are analyzed and compared with experimental results, analyzed the property of behavior for reinforced concrete columns.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.1003-1013
• /
• 2010

Fifty-nine accessions of 23 species in genus Rosa were collected, and 15 accessions of Rosa rugosa were collected throughout 10 regions of Korea. Their genetic relationship was investigated by using morphological analysis and RAPD marker. The morphological analysis was measured for 7 quantitative and quantified for 4 qualitative traits. RAPD analysis obtained a total of 959 polymorphic bands by using twenty primers. Morphological analysis classified most according to the rose section system except for several species. The cluster analysis of genus Rosa based on RAPD data could identify the subgenus $Platyrhodon$ and $Eurosa$. The subgenus $Eurosa$ separated five sections; $Gallicanae$, $Cinnamomeae$, $Pimpinellifoliae$, $Synstylae$ and $Caninae$. Correlation analysis between morphological and RAPD analysis showed low significance ($r$ = 0.35). The accessions of R. rugosa belonged to the section $Cinnamomeae$ clustered into three groups at genetic distance ranging from 0.28 on the base of RAPD analysis. In conclusion, the genetic relationship of the genus Rosa was consistent to the previously reported rose section system, and domestic collections of $R.$ $rugosa$ were separated from 3 groups on the base of RAPD marker.

• Steel and Composite Structures
• /
• v.18 no.4
• /
• pp.985-1000
• /
• 2015

The method of cross-section analysis for different sections in a structural frame has been widely investigated since the 1960s for determination of sectional capacities of beam-columns. Many hand-calculated equations and design graphs were proposed for the specific shape and type of sections in pre-computer age decades ago. In design of many practical sections, these equations may be uneconomical and inapplicable for sections with irregular shapes, leading to the high construction cost or inadequate safety. This paper not only proposes a versatile numerical procedure for sectional analysis of beam-columns, but also suggests a method to account for residual stress and geometric imperfections separately and the approach is applied to design of high strength steels requiring axial force-moment interaction for advanced analysis or direct analysis. A cross-section analysis technique that provides interaction curves of arbitrary welded sections with consideration of the effects of residual stress by meshing the entire section into small triangular fibers is formulated. In this study, two doubly symmetric sections (box-section and H-section) fabricated by high-strength steel is utilized to validate the accuracy and efficiency of the proposed method against a hand-calculation procedure. The effects of residual stress are mostly not considered explicitly in previous works and they are considered in an explicit manner in this paper which further discusses the basis of the yield surface theory for design of structures made of high strength steels.

• Transactions of Materials Processing
• /
• v.14 no.2 s.74
• /
• pp.139-144
• /
• 2005

It was investigated that curved aluminum products with 'ㄷ' section or with 'h' section could be bended during extrusion by the extru-bending process. In order to make bending at the exit section of die, the flow of billet inside die cavity was controlled by the shape of billet. As results of the analysis of $DEFORM^{™}-3D$, it was known that the bending phenomenon at the die exit can be happened by the asymmetric section of billet. And it was known by the experiment with plasticine or aluminum material that an symmetric product with 'c' channel section and the product with flanged 'h' section could be bended because of asymmetric shape of billet.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.80-83
• /
• 1999

Recently, it has been possible to the alphoid gene, which has X and Y specificity, and determine the sex from human physical evidence using PCR methods. Samples from single sources, PCR method applied to the alphoid gene results in highly sensitive and accurate results even when only 60 pg of the genomic DNA was available for sex determination. Even for samples containing DNA from more than one gender source where the female DNA was present in the amount 10 times than that of the male, sex determination was possible. Therefore, this result suggests that alphoid gene, which has X and Y specificity, could be used effectively for sex determination in case of mixed DNA samples from biological evidence.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.269-274
• /
• 2017

This study aimed to investigate the acoustic differences that occur in diverse sections of sustained vowel phonation, which is often used in an objective speech analysis of voice disorder patients. The subjects included 17 voice disorder patients (vocal nodules) and 12 normal individuals without any voice disorder. The participants' sustained vowel phonation of /a/ was divided into onset, middle, and offset, and the jitter, shimmer, and NHR in each section were analyzed using the MDVP(Multi-Dimensional Voice Program). The Friedman test and post hoc analysis were used. In the vocal nodules group, the jitter, shimmer and NHR were significantly higher in the off section of sustained vowel phonation than in the middle section, and there were no significant differences between the beginning and middle sections. In contrast, in the group of normal individuals, there were no significant differences between any of the sections. The values of the acoustic parameters according to the section of analysis in the sustained vowel phonation are different and the vocal in the end section is significantly more unstable than that in the middle section. The results of this study will be useful for selecting the sections to be analyzed in sustained vowel phonation and interpreting the results of the analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.120-126
• /
• 2001

The widely used spot welded section members of vehicles are structures which absorb most of the energy in a front-end collision. In front-end collision, sufficiently absorbed in the front parts, the impact energy does not reach the passengers. Simultaneously, the frame gets less damaged. This structures have to be very stiff, but collapse progressively to absorb the kinetic energy as expected. In the view of stiffness, the double-hat shaped section member is stiffer than the hat shaped section member. In progress of collapse, the hat shaped section member is collapsing progressively, but the double-hat shaped section member does not due to stiffness. An analysis on the hat shaped section member was previously completed. This paper concerns the collapse characteristic of the double-hat shaped section member. In the program system presented in this study, an explicit finite element code, LS-DYNA3D is adopted for simulating complicate collapse behavior of double hat shaped section members with respect to spot weld pitches. And comparing with the results from the quasi-static and impact experiment, the simulation has been verified.

• Journal of the Korean Home Economics Association
• /
• v.35 no.4
• /
• pp.79-94
• /
• 1997

This study was performed to develop a basic stacks pattern for middle-aged women reflecting the characteristics of their lower body types. Anthropometric measurements using sliding guage method were carried out for 4 women 40's For the analysis of the lower body types horizontal and vertical section maps obtained by sliding gauge method and 2 indices were produced. Based on the slacks construction components produced by the drafts of their lower body surface experimental slacks pattern was designed. Multiple comparison test was used to compare 3 existing slacks patterns with the experimental pattern. 1. The results of the body section map analysis were as follows: 1) In the frontal view silhouette of vertical section maps there were less individual differences in items with skeleton landmarks than those without them. 2) In the shape of horizontal section maps waist section represented more round shape than the others and thigh maximum width section had the flattest shape. Flat ratios(depth/width) of subjects were much higer than those of young women which clarified the change of depth was bigger than that of width with aging process. 2. The slacks construction components for pattern drafting were as follows: 1)Ease amount of waist was 0.5cm and front and back waist girth difference was 1.2cm Ease amount of hip was 1,8cm and front and back hip girth difference was 0.7 cm 2) The amount of dart intake incresed in the order of side(4cm) back(3,6cm) from (2.8cm) The length of dart leg incresed in the order of front side back.

• Journal of Mushroom
• /
• v.13 no.1
• /
• pp.37-40
• /
• 2015

Genetic relationship analysis by PCR reactions with 25 primers could produce relevant classifications of the 21 P. pulmonarius (Fr) Quel. isolates collected from 2005. They were classified by two groups with similarity coefficient 0.37. All of the P. pulmonarius cultivars belonged to group 2. New cultivar 'Hwasan' presented high similarity coefficient to parental strains, and that of 'Hosan' and 'Kangsan' cultivars was very high owing to shared crossing parents, and that of two strains from China was high, as well.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.289-299
• /
• 2020

The composition of convergence cross-section of the material is a technique that provides reasonable design and construction of structures. It is frequently used in medium-sized bridges and architectural structures. However, the structural behavioral spare capacity enhancement of the structure by the application of the convergence cross-section is still limited by the expandability due to the limiting state of each material. In order to overcome these limitations, this study reasonably analyzed the construction stages before and after the convergence cross-section constructed and developed a technique for forming multi-point boundary conditions using struts, which are compression members. Based on the existing cases, a reasonable construction step for forming the material composite section of the entire structural system of the structure was derived, and a numerical analysis model for a specific part was constructed to analyze the behavior of the strut application. As a result of this study, the effect of reducing the sectional force of 7.40% in beam-column joint and 6.31% in the center of girder was derived, and the deflection, which is a measure of the serviceability of the structure, improved by 54.41% from the installation and dismantling of strut members at each construction stage.