• Economic and Environmental Geology
• /
• v.28 no.6
• /
• pp.613-621
• /
• 1995

It is understood that many big tungsten deposits such as the Sangdong in Korea, Fugigatami in Japan, Yukon in Canada, Pine Creek in U.S.A and Vostok in Russia were formed at late Cretaceous ages. However, most of tungsten mineralization in China where half the total world tungsten ores is reserved took place in late Jurassic to early Cretaceous ages. While the close association of molybdenum with tungsten mineralization is observed in the deposits related with Cretaceous magma, tungsten deposits in China related with late Jurassic to early Cretaceous show a close association of tin as well as molybdenum mineralization. It is characteristic that tungsten mineralization in China was followed by tin mineralization. The mode of occurrence of tungsten ore deposits in China is various and may represent the origin of tungsten in general, since the larger half of total amount of tungsten ores in the world are reserved in China. In case of Korea, more than 90% of total production of tungsten was occupied by the Sangdong tungsten deposit, which produced molybdenite as a byproduct Even if tin is detected in ppm unit content, no cassiterite is found in the Sangdong tungsten orebody. A similar type of two tungsten deposits is comparatively studied in order to confirm the published data; one is the Moping tungsten deposit in China and the other is the Dehwa tungsten deposit in Korea. Mineral assemblages occurring in quartz veins of both deposits are more or less same except that zinnwaldite and cassiterite occur only in the former deposit Ages of zinnwaldite and muscovite closely with molybdenite in the former deposit are 181.1 Ma and 167.8 Ma respectively, while muscovites associated with molybdenite in the latter deposit show ages of 80.9 Ma and 80.2 Ma. These results may represent deficient supply of tin from the source granitoid from which tungsten was derived in Korean peninsula during Cretaceous period, while tin supplied during tungsten mineralization tended to increase and the active tin mineralization followed the Jurassic tungsten mineralization in China.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.199-203
• /
• 2015

With the development of industry these days, the demand for electric power increases and the larger capacity for power transfer is required. The scales of facilities should become larger; and the relative systems are required to operate with a higher degree of reliability. Therefore, stabilization of electric power systems is an important issue. The high degree of reliability required in the process of production and supply of electric power is an essential part of industrial society. Accident such as blackouts causes a hugh amount of economic losses to the high-tech industrial society dependent upon electric power. This paper is about the basic study of the relations between the load current and lifetime of power cables in operation. In order to do the research, we installed a current transformer and an equipment for measuring temperature at the 6.6. kV cables in operation. The two equipments have been installed on the cable systems in operation for the last 20 years. Since the insulation resistance of most of the cables showed the value larger than the threshold, it was not easy to tell the remaining lifetime of cables. The load current of the cables was almost constant. The surrunding temperature was $15{\sim}25^{\circ}C$, little variation of temperature values.

• 한국해양학회지
• /
• v.29 no.3
• /
• pp.269-277
• /
• 1994

Process of resuspension and accumulation well explaines the characteristics of surface sediment size distribution and suspended material in Deukryang Bay. Most of the surface sediments of the bay show asymmetric unimodal size distribution, which is found also in sediments from western part of the inner shelf mud area between Keomundo and Yokchido islands. Investigation of the size curves indicates that surface sediment in Deukryang Bay is a deposit of suspended coastal sediment transported east along southern coast of Korea. The distribution pattern of coarse sit fraction content in the surface sediment is very similar to that of computed current velocity (Lee, 1994), suggesting that fine sediment on the bed may reassumed and accumulate repeatedly due to shallow depth and strong tidal current in Deukryang Bay. The process of repeated resuspension and accumulate repeatedly due to shallow depth and strong tidal current in Deukryang Bay. The process of repeated resuspension and accumulation seems to be responsible not only to the asymmetric size distribution of the surface sediment, but also to the amount of suspended material in the bay. The difference of suspended material concentration between surface and near bottom water in summer is two times as large as that the in winter. This seems to derive from the fact that stratification of water mass prevails in summer, while total water mass is vertically mixed in winter. It was found that the most important factors to decide distribution of suspended material in Deukryang Bay are the physical properties of water mass such as current velocity and stratification, and water depth, in part with the supply of suspended sediment by rivers.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.841-855
• /
• 2018

The purpose of this study is to estimate the available potential heat source for heat pump in the district heating supply area in the city. Unused energy potentials were estimated and integrated based on open source based data. In particular, geographical spatial analysis of recoverable heat energy density and heat demand in the heat source area of large retailers and public sauna facilities in the DH network located in the southern part of the metropolitan area (Pyeongtaek-si) was conducted. As a result of the study, the DH network area had a total potential energy of 1,741.7 toe/year for the two heat sources of large retailers and public saunas. It is estimated that 1,006.9 toe/year, which is 57.8% of the total, can be linked to the district heating. The large retailers showed a positive correlation with the floor area and energy use of 0.4937. The recoverable energy intensity was estimated to be $0.0017toe/m^2$ per unit area and $0.0069tCO_2/m^2$ for greenhouse gas emissions. In addition, public saunas were analyzed by comparing the empirical case with the theoretical calculation, and it was estimated that energy conservation estimate of 80% was $0.0315toe/m^2$ per bath area and $0.1183tCO_2/m^2$ for greenhouse gas emissions. The total potential energy amount of this area was positively correlated with the heat demand of apartment house by administrative district, and it was confirmed that it had a relatively high potential energy especially in traffic and commercial center.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.4
• /
• pp.23-29
• /
• 2023

Ground subsidence shows a mechanism in which the upper ground collapses due to the formation of a cavity due to the movement of soil particles in the ground due to the formation of a waterway because of damage to the water supply/sewer pipes. As a result, cavity is created in the ground and the upper ground is collapsing. Therefore, ground subsidence frequently occurs mainly in downtown areas where a large amount of underground facilities are buried. Accordingly, research to predict the risk of ground subsidence is continuously being conducted. This study tried to present a ground subsidence risk prediction model for two districts of ○○ city. After constructing a data set and performing preprocessing, using the property data of underground facilities in the target area (year of service, pipe diameter), density of underground facilities, and ground subsidence history data. By applying the dataset to the machine learning model, it is evaluated the reliability of the selected model and the importance of the influencing factors used in predicting the ground subsidence risk derived from the model is presented.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.389-397
• /
• 2017

Friedel's salt is an important product of chemical adsorption between cement hydrate and chloride ions because it contains chlorine in its structure. When cement reacts with water in the presence of chloride ions, the $C_3A$ phase, and $C_4AF$ phase react with chloride to produce Friedel's salt. If chloride ions penetrate into concrete from external environments, many calcium aluminate hydrates, including AFm, can bind chloride ions. It is very important, therefore, to investigate the chloride binding isotherm of $C_3A$ phase, $C_4AF$ phase, and AFm phase to gain a better understanding of chloride binding in cementitious materials. Meanwhile, the adsorption isotherm can provide us with the fundamental information for the understanding of adsorption process. The experimental results of the isotherm can supply not only the quantitative knowledge of the cement-Friedel's salt system, but also the mechanism of adsorption and the properties of their interactions. The purpose of this study is to explore the time dependant behaviors of chloride ions adsorption with $C_3A$, $C_4AF$ and AFm phases. The chloride adsorption isotherm was depicted with Langmuir isotherm and the adsorption capacity was low in terms of the stoichiometric point of view. However, the chloride adsorption of AFm phase was depicted with Freundlich isotherm and the value was very low. Since the amount of the adsorption was governed by temperature, the affecting parameters of isotherm were expressed as a function of temperature.

• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.170-180
• /
• 2018

Highland fields are concentrated in the Jaun area of Hongcheong-gun, a large amount of sediments are discharged from the highland fields. The sediment runoff affect the turbidity and water quality of the Soyang Lake, furthermore adversely affect water supply source of the capital region. There are several kinds of BMPs(Best management practices) to decrease the sedimentrunoff from the highland fields. Although construction cost of multistage sedimentation basins is very high, there is no actual survey data for the removal efficiency of suspended sediments and water quality in our country. In this study, stormwaterinflow and outflow of the multistage sedimentation basins were surveyed, and the removal efficiency of nonpoint source pollutants were analyzed. The stormwater survey results fortwo rainfall events show thatremoval efficiencies of SS, BOD and TP loads in the multistage sedimentation basins are 35%~62%, 24%~55%, 35%~58%, respectively. Although the measured efficiencies of the basins were lower than the theoretical efficiency, the proper operation and management can improve the removal rate of the basins. Turbid water problem in the upper parts of the Soyang River can be managed effectively through the additional installation of multistage sedimentation basins.

• 한국해양학회지
• /
• v.26 no.4
• /
• pp.313-323
• /
• 1991

Fine-grained sediments of the Han River and adjacent Kyonggi Bay have been studied using the powder x-ray diffractometer in order to study the distributional characteristics of clay minerals in the bottom and suspended sediments. The result of the XRD analyse shows that the major clay minerals in the lower Han River are composed of illite (57.1%), kaolinite (22.9%), and chlorite (19.6%) and that those of the Han River Estuary are composed of illite (67.2%), chlorite (16.5%), kaolinite 915.5%), and smectite (1.3%). The variation of mineral content shows distinct distributional characteristics depending on sedimentary environments. The illite content increases gradually approaching the Kyonggi Bay and kaolinite content decreases toward the sea within the range between 11% and 23%. The trend of chlorite is similar to that of kaolinite, the amount of which ranges between 14% and 19%. Smectite content is lower than 3%. Analysis of illite using peak-intensity ratio (001/002) indicates that two types of illites occur in the study area. Dioctahedral-type illite occurs as an indicator of the marine sediments. The illites distributed between the Kyonggi Bay and the Han River are mixtures of dioctahedral- and trioctahedral-types. This study indicates that the distribution of illite, kaolimite, and chlorite has been influenced mainly by the supply from the Han River and redistributed by estuarine circulation, such as tidal circulation and seasonal variation of river discharge. However, smectite is apparently supplied from other sources such as Yellow Sea or China. This study suggests that estuarine mixing system and seasonal variations of river discharge are the major factors controlling the distribution pattern of clay minerals in the study area.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.525-531
• /
• 2011

Exhaust gas recirculation (EGR) is more effective than selective catalytic reduction (SCR) or lean $NO_x$ trap (LNT) for the reduction of $NO_x$ emissions in diesel engines. A large amount of EGR gas is necessary to satisfy the stringent regulations on $NO_x$ emissions. Low pressure loop (LPL) EGR is almost independent of the variable geometry turbocharger (VGT) at a specific boost pressure, so LPL EGR is better than conventional high pressure loop (HPL) EGR in terms of EGR supply. We compare the influence of HPL EGR and LPL EGR on the combustion characteristics at a constant boost pressure in a diesel engine. The dilution ratio was employed as an independent parameter to analyze the effect of the dilution of the intake charge for each EGR loop. At the same level of $NO_x$ emissions, the fuel consumption and smoke opacity were slightly lower for LPL EGR than for HPL EGR.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.9
• /
• pp.1310-1314
• /
• 2012

Gastrointestinal digestibility of new proteins inserted in the food supply is a significant parameter for assessing the safety of GM foods based on the assumption that digestive stability is undesirable. In this study, we performed in vitro digestion of CP4EPSPS, a new protein, expressed in genetically modified (GM) soybean in order to evaluate its digestibility in three different ratios of simulated gastric fluid with preheating. Ratios of GM soybean to simulated gastric fluid were 2:2, 2.5:1.5, and 1.5:2 and preheating was conducted at $100^{\circ}C$ for 5 min. Electrophoresis and Western blotting were used to confirm changes in soybean protein patterns and CP4EPSPS gene expression after in vitro digestion. At ratios in which the amount of gastric fluid was equal to (2:2) or relatively higher than that of soybean (1.5:2), no CP4EPSPS (47.4 kDa) protein was detected after 15 seconds of simulated gastric fluid incubation, the earliest time interval evaluated. However, when the ratio of GM soybean to gastric fluid was 2.5:1.5, CP4EPSPS was detected in 5 min and gradually decreased according to time. After preheating, no CP4EPSPS protein was detected after 15 seconds under all conditions. From these results, we concluded that the digestibility of CP4EPSPS in simulated gastric fluid increased upon preheating. Accordingly, we suggest that it is important to account for the ratio of gastric fluid to GM food in in vitro digestibility assessment models of GM food.