• Journal of Powder Materials
• /
• v.27 no.5
• /
• pp.401-405
• /
• 2020

Magnesium hydroxide sulfate hydrate (MHSH) whiskers were synthesized via a hydrothermal reaction by using MgO as the reactant as well as the acid solution. The effects of the H₂SO₄ amount and reaction time at the same temperature were studied. In general, MHSH whiskers were prepared using MgSO₄ in aqueous ammonia. In this work, to reduce the formation of impurities and increase the purity of MHSH, we employed a synthesis technique that did not require the addition of a basic solution. Furthermore, the pH value, which was controlled by the H₂SO₄ amount, acted as an important factor for the formation of high-purity MHSH. MgO was used as the raw material because it easily reacts in water and forms Mg⁺ and MgOH⁺ ions that bind with SO₄^2- ions to produce MHSH. Their morphologies and structures were determined using X-ray diffraction (XRD) and scanning electron microscopy (SEM).

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.182-185
• /
• 2012

N-doped $TiO_2$nanotubes have been newly prepared by two stage sol-gel and strong-alkali hydrothermal process using $TiCl_4$ and hydrazine/ammonia aqueous solution as raw materials. These nanotubes revealed a well developed anatase crystalline phase and perfect nanotube morphology with the diameter around 10nm and the wall thickness below 3 nm. Also, they showed a superior visible light activity and yellowish color due to the light absorption redshifted by ~35 nm and ~25 nm compared to undoped $TiO_2$ nanotubes and anatase nanoparticles, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.218-218
• /
• 2012

Nanocrystalline $SnO_2$ colloids are synthesized by hydrolysis of $SnCl_4{\cdot}5H_2O$ in aqueous ammonia solution. The synthesized $SnO_2$ nanoparticles with ca. 15 nm in diameter are coated on a fluorinedoped thin oxide (FTO) conductive substrate and heated at $550^{\circ}C$. The annealed $SnO_2$ film is treated with aqueous $TiCl_4$ solution, which is sensitzied with MK-2 dye (2-cyano-3-[5'''-(9-ethyl- 9H-carbazol-3-yl)-3',3'',3''',4-tetra-n-hexyl-[2,2',5',2'',5'',2''']-quater thiophen-5-yl]). Compared to bare $SnO_2$ film, the conversion efficiency is significantly improved from 0.22% to 3.13% after surface treatment of $SnO_2$ with $TiCl_4$, which is mainly due to the large increases in both photocurrent density from 1.33 to $9.46mA/cm^2$ and voltage from 315 to 634 mV. It is noted that little change in the amount of the adsorbed dye is detected from 1.21 for the bare $SnO_2$ to $1.28{\mu}mol/cm^2$ for the $TiCl_{4-}$ treated $SnO_2$. This indicates that the photocurrent density increased by more than 6 times is not closely related to the dye loading concentration. From the photocurrent and voltage transient spectroscopic studies, electron life time increases by about 13 order of magnitude, whereas electron diffusion coefficient decreases by about 3.6 times after $TiCl_4$ treatment. Slow electron diffusion rate offers sufficient time for regeneration kinetics. As a result, charge collection efficiency of about 40% before $TiCl_4$ treatment is improved to 95% after $TiCl_4$ treatment. The large increase in voltage is due to the significant increase in electron life time, associated with upward shift of fermi energy.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.639-645
• /
• 2009

In this study, alkanolamine was used to achieve high absorption rates for $CO_2$ as suggested at several literatures. The absorption rates of aqueous AMP and MEA solutions with $CO_2$, $SO_2$, $NO_2$ were measured using a stirredcell reactor. The reaction rate constants were determined from the measured absorption rates. The performances were evaluated under various operating conditions. As a result, the reactions with $SO_2$, $NO_2$ into aqueous AMP and MEA solutions were classified as an instantaneous reaction respectively. The absorption rates increased with increase of the reaction temperature and the concentration of absorbents. The simultaneous absorption rate of $CO_2/SO_2/NO_2$ into 3, 5, 10 wt.% MEA at various pressure of $CO_2/SO_2/NO_2$, was more increased 14~20% than AMP solution. We investigated the effect of $SO_2$ and $NO_2$ on the simultaneous absorption of $CO_2/SO_2/NO_2$ from a flue gas. The performances were evaluated under various operating conditions in order to investigate the absorption characteristic.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.709-714
• /
• 1997

$TiO_2$ hydrate coating on mica in an aqueous solution of $TiOSO_4$ by the hydrolysis using ammonia water studied with emphasis on coating conditions for a uniform coating. For the uniform coating of $TiO_2$ film on mica surface, it was found that smaller mica particles were coated more uniformly compared to larger particles. It was necessary to suppress the rate of formation of hydrated $TiO_2$ particles in solution, which were deposited on mica and generate irregular coating. It was also necessary to control precipitation yield by varying the reaction temperature to obtain uniform coating. More uniform coating was obtained with higher precipitation yield. A uniform dense film was formed when mica particles of average size of $14.7{\mu}m$ is used for mica slurry solution, of which pH is 2.5, and the factor of acidity of $TiOSO_4$ solution is 291, and the solution was kept at $80^{\circ}C$ for 3 hours. The morphology of $TiO_2$ film formed on mica was little affected by firing at $900^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.749-755
• /
• 1997

Molybdenum phosphate(P/Mo = 0.6) has been synthesized with ammonium molybdate and phosphoric acid under aqueous solution. The kinetics of the ammoxidation of methylpyrazine over molybdenum phosphate catalyst was investigated with the variation of reaction temperature and partial pressure of methylpyrazine, oxygen and ammonia, respectively at atmospheric pressure. The catalytic activity was constant for 300hrs operation under our experimental conditions. Under the steady-state condition, the rate equation of methylpyrazine was shown as $-r=kP_{MP}P_{NH3}{^0}P_{O2}{^{\gamma}}({\gamma}=2.2;1.3{\leq}P_{O2}(kPa){\leq}4)$. The apparent activation energy was 29.6kcal/mol below 623K. The main product obtained in the ammoxidation of methylpyrazine is cyanopyrazine whose selectively was kept always over 90% regardless of conversion.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1623-1632
• /
• 2006

NiO supported on zirconia modified with $MoO_3$ for acid catalysis was prepared by drying powdered $Ni(OH)_2-Zr(OH)_4$ with ammonium heptamolybdate aqueous solution, followed by calcining in air at high temperature. The characterization of prepared catalysts was performed using FTIR, Raman, XRD, and DSC. $MoO_3$ equal to or less than 15 wt% was dispersed on the surface of catalyst as two-dimensional polymolybdate or monomolybdate, while for $MoO_3$ above 15 wt%, crystalline orthorhombic phase of $MoO_3$ was formed, showing that the critical dispersion capacity of $MoO_3$ on the surface of catalyst is 0.18 g/g NiO-$ZrO_2$ on the basis of XRD analysis. Acidity and catalytic activities for acid catalysis increased with the amount of dispersed $MoO_3$. The high acid strength and acidity was responsible for the Mo=O bond nature of the complex formed by the interaction between $MoO_3$ and $ZrO_2$. The catalytic activity for acid catalysis was correlated with the acidity of the catalysts measured by the ammonia chemisorption method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.3
• /
• pp.350-353
• /
• 2005

Effects of sucrose supplement on the pattern of VFA production and microbial protein synthesis in the rumen were examined in sheep consuming basal diet of grass silage (2.5 kg fresh wt/d) that was provided in 24 equal meals each day by an automatic feeder. Four mature wethers were allocated to four experimental treatments in a 4${\times}$4 Latin square design with periods lasting 14 days. The treatments were (1) the basal diet, (2) supplemented with 150 g sucrose and 7.0 g urea, (3) 300 g sucrose and 13 g urea, and (4) 450 g sucrose and 20 g urea given as a continuous intraruminal infusion for 24 h. All infusions were given in 2 litres of aqueous solution per day using a peristaltic pump. The effect of sucrose level on rumen mean pH was significantly linear (p<0.01). There were not significant differences in the concentration of ammonia-N, total VFA and the molar proportions of acetate, propionate and butyrate with the level of sucrose infusion. The molar proportions of isobutyric acid (p<0.05) and isovaleric acid (p<0.001) were significantly reduced when the infused amount of sucrose was increased. The flow of microbial N was linearly (p<0.001) increased with sucrose and urea level. High levels of readily fermentable carbohydrate in a ration reduced the efficiency of microbial protein synthesis in the rumen. It was demonstrated that of the individual fatty acids, only the molar proportion of isovalerate showed a significant negative correlation (R2=$0.3501^{**}$) with the amount of microbial N produced and a significant positive correlation (R2=$0.2735^{**}$) with the efficiency of microbial growth.

• Journal of Sericultural and Entomological Science
• /
• v.47 no.2
• /
• pp.88-92
• /
• 2005

In order to make pure dyestuff extract from polygonum tinctoria, we tried to traditionally-using cockle shell which the extracted water should be filtered in indigo for 8 hours and at the $40^{\circ}C$, and 4.0 pH. The 1.631g of powder dye could be produced when the 10.0 ml of aqueous ammonia was added into the solution, which had been filtered for 8 hours with the 300 g of indigo plant and the 2.51 of water. The main components of two maded -dye which has traditionally made of this and has purely made of that compared by TLC, HPLC, LC/MC techniques. Finally, the antibacterial activities and deodorization ratio of silk fabrics with natural indigo were carried out, too.

• Journal of the Korean Ceramic Society
• /
• v.50 no.3
• /
• pp.201-205
• /
• 2013

Magnesium hydroxide sulfate hydrate ($5Mg(OH)_2.MgSO_4{\cdot}3H_2O$, abbreviated 513 MHSH) whiskers were synthesized using MgO and $MgSO_4.7H_2O$ as reactants without addition of basic solution. Previously, MHSH whiskers were prepared by hydrothermal method using $MgSO_4$ in aqueous ammonia. In this work, for the first time, we synthesized a high purity MHSH via ambient pressure. In addition, a high molar ratio of $MgSO_4$ : MgO is an important key to the formation of high purity MHSH. Also, it was possible to prepare whiskers with high aspect ratio using an increasing reaction time in the reaction between the remaining $SO_4^{2-}$ ions and the ${Mg(OH)_6}^{4-}$ fragment, finally producing one-dimensional whiskers.