• 설비공학논문집
• /
• 제15권10호
• /
• pp.828-834
• /
• 2003

A diffusion absorption refrigerator is a heat-generated refrigeration system. It uses a three-component working fluid consisting of the refrigerant (ammonia), the absorbent (water) and the auxiliary gas (hydrogen or helium). In this study, experimental investigations have been carried out to examine the effects of charging conditions of working fluids on the evaporating temperature for diffusion absorption refrigerator. Experimental parameters considered in the present experiments are charging concentration, solution charge and system pressure determined by auxiliary gas charged. As a result, in the charging condition of 35% of concentration and 20 kg$_{f}$cm$^2$ of system pressure, the system has the lowest evaporating temperature. It was found that there exists a minimum value of solution charge for the operation of diffusion absorption refrigerator.r.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.53-57
• /
• 2013

해수담수화장치에서 배출되는 농축수로부터 희소금속인 리튬을 추출하는 공정을 개발하기 위한 선행 연구로, 용매추출제 TTA와 TOPO를 사용하여 수용액 중의 리튬이온을 추출하는 연구를 수행하였다. 추출제의 농도, 유기용매의 종류, 추출액과 수용액의 비, 수용액의 pH 및 알칼리제 종류 등을 변화시키면서 리튬 이온의 용매추출에 미치는 영향을 조사하였다. 해수의 주요 성분인 염화나트륨의 첨가가 리튬 이온의 용매추출에 미치는 영향도 함께 조사하였다. 리튬 추출의 최적 조건은 추출제 농도는 TTA 0.02 M, TOPO 0.04 M, 유기용매는 케로센, pH는 10.2~10.6 이었으며, 알칼리제로는 암모니아 수용액을 사용한 경우 리튬이온의 추출효율이 가장 높았다. 또한 염화나트륨을 첨가하여 리튬 용매추출을 진행한 결과 염화나트륨은 리튬이온의 추출을 방해하는 것을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.818-826
• /
• 2004

The spray-induced mixing characteristics and thermal decomposition of aqueous urea solution into ammonia have been studied to design optimum sizes and geometries of the mixing chamber in SCR(Selective Catalytic Reduction) system. The cold flow tests about the urea-injection nozzle were performed to clarify the parameters of spray mixing characteristics such as mean diameter and velocity of drops and spray width determined from the interactions between incoming air and injected drops. Discrete particle model in Fluent code was adopted to simulate spray-induced mixing process and the experimental results on the spray characteristics were used as input data of numerical calculations. The simulation results on the spray-induced mixing were verified by comparing the spray width extracted from the digital images with the simulated Particle tracks of injected drops. The single kinetic model was adopted to predict thermal decomposition of urea solution into ammonia and solved simultaneously along with the verified spray model. The hot air generator was designed to match the flow rate and temperature of the exhaust gas of the real engines The measured ammonia productions in the hot air generator were compared with the numerical predictions and the comparison results showed good agreements. Finally, we concluded that the design capabilities for sizing optimum mixing chamber were established.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1371-1374
• /
• 2001

Metal doping was adopted to modify TiO2 (P-25) and enhance the photocatalytic degradation of harmful cyanides in aqueous solution. Ni, Cu, Co, and Ag doped TiO2 were found to be active photocatalysts for UV light induced degradation of aqueous cyanides generating cyanate, nitrate and ammonia as main nitrogen-containing products. The photoactivity of Ni doped TiO2 was greatly affected by the state of Ni, that is, the crystal size and the degree of reduction of Ni. The modification effects of some mixed oxides, that is, Ni-Cu/TiO2 were also studied. The activity of Ni-Cu/TiO2 for any ratio of Cu/Ni was higher than that of Ni- or Cu-doped TiO2, and the catalyst at the Cu/Ni ratio of 0.3 showed the highest activity for cyanide conversion.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4377-4381
• /
• 2011

In this study, real-time and label-free methods for monitoring the enzymatic reaction of urease, which releases ammonia through the hydrolysis of urea in an aqueous solution, were developed using a liquid crystal (LC)-based pH sensor. Nematic liquid crystal 4-cyano-4'-pentylbiphenyl (5CB), doped with 4'-pentyl-biphenyl-4-carboxylic acid (PBA), exhibited a shift in optical appearance from bright to dark when it was in contact with ammonia generated from the enzymatic reaction between urease and urea. This optical change was attributed to the anchoring transitions of LCs caused by hydrophobic interactions between the tails of deprotonted PBA ($PBA^-$) molecules and the LCs at the aqueous/LC interface. This novel technique holds great promise for the sensitive detection of urease along with its substrates and inhibitors.

• 대한환경공학회지
• /
• 제22권2호
• /
• pp.211-216
• /
• 2000

본 연구는 오염가스 제거시 발생되는 부산물인 에어로졸 입자가 방전전극에 부착되어 생기는 방전불안으로 제거율이 급격히 저하되는 문제점을 개선하고 제거장치의 운전비용을 감소시키기 위한 연구이다. 이를 위해 오염가스 제거에 필요한 라디칼과 이온을 발생시키기 위한 전기방전영역과 연소가스가 흐르는 관로를 분리시킨 플라즈마 반응기를 사용하여 방전불안에 의한 제거효율 저하와 방전선 산회 문제를 개선하여 장시간 운전 가능성을 확인하였고, 또한 운전비용을 감소시키기 위해서는 코로나 방전에 의한 비열플라즈마를 이용하여 연소가스를 산화 변화시키고, 첨가제로 수산화나트륨 수용액 증기와 소량의 암모니아를 사용하였다. 그 결과 암모니아 분자 몰비를 1.5로 하고, 유량이 $2.5{\ell}/min$인 질소가스로 농도가 20%인 수산화나트륨 수용액을 버블링하여 주입하였을 때 질소산화물, 황산화물 제거율이 각각 95, 100%인 우수한 제거특성을 얻었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1920-1926
• /
• 2010

Yoon et $al.^1$ presented an approximate mathmatical model to describe ammonia removal from an experimental batch reactor system with gaseous headspace. The development of the model was initially based on assuming instantaneous equilibrium between ammonia in the aqueous and gas phases. In the model, a "saturation factor, $\beta$" was defined as a constant and used to check whether the equilibrium assumption was appropriate. The authors used the trends established by the estimated $\beta$ values to conclude that the equilibrium assumption was not valid. The authors presented valuable experimental results obtained using a carefully designed system and the model used to analyze the results accounted for the following effects: speciation of ammonia between $NH_3$ and $NH^+_4$ as a function of pH; temperature dependence of the reactions constants; and air flow rate. In this article, an alternative model based on the exact solution of the governing mass-balance differential equations was developed and used to describe ammonia removal without relying on the use of the saturation factor. The modified model was also extended to mathematically describe the pH dependence of the ammonia removal rate, in addition to accounting for the speciation of ammonia, temperature dependence of reactions constants, and air flow rate. The modified model was used to extend the analysis of the original experimental data presented by Yoon et $al.^1$ and the results matched the theory in an excellent manner.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2007-2009
• /
• 1999

In this paper, discharge domain of wire-cylindrical plasma reactor was separated from a gas flow duct to avoid unstable discharge by aerosol particle deposited on discharge electrode and grounded electrode. The NOx, SOx removal was experimentally investigated by a reaction induced to ammonium nitrate, ammonium sulfate using a low price of aqueous NaOH solution and a small quantity of ammonia. Volume percentage of aqueous NaOH solution used was 20% and $N_2$ flow rate was 2.5[$\ell$/min] for bubbling aqueous NaOH solution. Ammonia gas(14.82%) balanced by argon was diluted by air and was introduced to a main simulated flue gas duct through $NH_3$ injection system which was in downstream of reactor. The $NH_3$ molecular ratio[MR] was determined based on $NH_3$ to [NO+$SO_2$]. MR is 1.5. The NOx removal rates increased in the order of DC, AC and pulse, but SOx removal rates was not significantly effected by source of electricity. The NOx removal rate slightly decreased with increasing initial concentration but SOx removal rate was not significantly effect by initial concentration, and NOx, SOx removal rates decreased with increasing gas flow rate.

• 한국환경과학회지
• /
• 제4권1호
• /
• pp.91-103
• /
• 1995

The reaction rate, equilibrium, and flow injection analysis methods were fundamentally evaluated for the determination of aqueous ammonia. The selected indophenol blue method was based on the formation of indophenol blue in which ammonium ion reacted with hypochlorite and phenol in alkaline solution. In the optimized reaction condition, the reaction followed 1st order reaction kinetics and the final product was stable. The absorbance measurements before and after the equilibrium were utilized for the reaction rate and equilibrium methods. The reaction rate methods, based on the relative analytical signals for the possibility of eliminating interferents, were shown to have good linear calibration curves but the detection limit and the calibration sensitivity were poorer than those in the equilibrium method. The detection limits were 32-49 pub and 24 pub for the reaction rate and equilibrium methods, respectively In the flow injection analysis, the absorbance was measured before the equilibrium reached and thus resulted in 30% reduction of calibration sensitivity. However, the detection limit was 11 ppb, indicating that the peak-to-peak noise for the blank was remarkably improved. Compared to the manual methods, the optimized experimental condition in a closed reaction system reduced the blank absorbance and the inclusion of ammonia from the atmosphere was prevented. In addition, highly reproducible mixing of sample and reagents and analytical data extracted from continuous recording showed excellent reproducibility.

• 대한기계학회논문집B
• /
• 제39권2호
• /
• pp.177-182
• /
• 2015

디젤 엔진과 산업용 보일러에서의 질소산화물(NOX) 배출은 환경오염을 유발시키는 주요물질 중의 하나이다. 이러한 질소산화물 발생을 저감시키기 위한 방법으로 후처리 기술 중의 하나인 우레아 선택적 촉매 환원(Urea-SCR)기술이 널리 사용되고 있다. 본 연구에서는 선박용 디젤엔진의 배기가스 조건을 모사한 실험실 스케일의 실험장치를 통해 우레아 수용액의 열분해 특성에 대해 고찰하였다. 40 wt. %의 우레아 농도를 가진 우레아 수용액을 사용하였고, 모사가스의 온도와 유속변화, 우레아 수용액의 유량에 따른 총 전환율 뿐만 아니라 암모니아($NH_3$)와 이소시안산(HNCO)의 전환율 차이를 알아보았다. $210^{\circ}C$와 $250^{\circ}C$ 모사가스 온도에서 체류시간에 따라 암모니아의 전환율이 이소시안산의 전환율보다 높게 나타남을 확인하였다.