• 제목/요약/키워드: Amide

검색결과 695건 처리시간 0.034초

사슬 길이가 다른 지방족 디아민으로 가교된 폴리이미드 분리막의 기체 투과 특성 (Gas Transport Properties of Crosslinked Polyimide Membranes Induced by Aliphatic Diamines with Different Chain Length)

  • 이혜림;이정무;남상용
    • 멤브레인
    • /
    • 제23권6호
    • /
    • pp.450-459
    • /
    • 2013
  • 폴리이미드 기체 분리막의 기체 분리 성능을 향상시키기 위해서 2,3,5,6-Tetramethyl-1,4-phenylenediamine(TMPD) 구조를 지닌 폴리이미드를 1,2-Diaminoethane (DAE)과 1,6-Diaminohexane (DAH)으로 가교시켜 분리막을 제조하였다. Fourier transform infrared spectroscopy (FT-IR)를 이용해 가교 후 이미드 고리가 아미드 그룹으로 전환됨을 확인하였다. 폴리이미드의 열분해 온도는 가교 후 감소하였으며, 이는 가교제의 알킬기 분해 때문이다. 가교된 폴리이미드 분리막의 d-spacing은 가교 시간이 증가함에 따라 감소하였다. 가교 후 $CH_4$, $N_2$, $O_2$, $CO_2$ 기체의 투과도는 가교 전 보다 감소하였으며, DAH로 가교된 분리막이 DAE보다 더 높은 투과도를 나타냈다. 투과도와 달리 $CO_2/CH_4$, $CO_2/N_2$, $O_2/N_2$ 기체 선택도 모두 가교 시간이 길어질수록 증가된 결과가 나타났다. $CO_2/CH_4$ 기체의 선택도는 DAE로 6분 가교 시 최대 증가치를 나타냈으며 39.5%까지 증가하였다. $O_2/N_2$ 선택도 또한 DAE로 6분 가교 시 최대 증가치를 가지며 20.5%까지 증가하였다. 이를 통해서 DAE가 DAH보다 선택도 증가에 적합한 가교제임을 예상할 수 있으며 이와 달리 $CO_2/N_2$ 선택도는 DAE로 3분 가교 시 감소해 $CO_2/N_2$ 분리에는 적합하지 않은 결과가 나타났다.

새로운 생약복합제제(HPL-4)의 품질관리를 위한 분석법 개발 (Development of Analytical Method for Quality Control from New Herbal Medicine(HPL-4))

  • 김세건;서르마 디박 쿠마르;라미차네 라마칸타;이경희;한상미;정현주
    • 생약학회지
    • /
    • 제45권4호
    • /
    • pp.338-345
    • /
    • 2014
  • HPL-4 is a new herbal formulation developed for the treatment of osteoarthritis. In this study, we took HPL-4 to develop a method for simultaneous determination of nine marker compounds (protocatechuic acid, chlorogenic acid, liriodendrin, nodakenin, ${\beta}$-$\small{D}$-(3-O-sinapoyl)frucofuranosyl-${\alpha}$-$\small{D}$-(6-O-sinapoyl)glucopyranoside, quercitrin, 6-gingerol, decursin and decursinol angelate) present in the formulation. The analytes were separated by UPLC system consisting of diode array detector at 205 nm and RP-amide column, and solvent system of $ACN/0.1%H_3PO_4$. Analytical method was validated to evaluate its linearity, limit of detection (LOD), limit of quantification (LOQ), precision, and accuracy. All standards showed good linearity ($R^2$ >0.99) in the rage of $0.25-400.0{\mu}g/mL$. The LOD and LOQ were within the range of 0.021-0.148 and $0.070-0.448{\mu}g/mL$, respectively. Intra- and inter-day precision was less than RSD 4.0% and the accuracy was range from 92.00-104.81% with RSD<4.2%. The results suggest that the developed UPLC method is precise, accurate and effective, and could be applied for quality control of HPL-4 formulation.

Physical Modeling of Chemical Exchange Saturation Transfer Imaging

  • Jahng, Geon-Ho;Oh, Jang-Hoon
    • 한국의학물리학회지:의학물리
    • /
    • 제28권4호
    • /
    • pp.135-143
    • /
    • 2017
  • Chemical Exchange Saturation Transfer (CEST) imaging is a method to detect solutes based on the chemical exchange of mobile protons with water. The solute protons exchange with three different patterns, which are fast, slow, and intermediate rates. The CEST contrast can be obtained from the exchangeable protons, which are hydroxyl protons, amine protons, and amide protons. The CEST MR imaging is useful to evaluate tumors, strokes, and other diseases. The purpose of this study is to review the mathematical model for CEST imaging and for measurement of the chemical exchange rate, and to measure the chemical exchange rate using a 3T MRI system on several amino acids. We reviewed the mathematical models for the proton exchange. Several physical models are proposed to demonstrate a two-pool, three-pool, and four-pool models. The CEST signals are also evaluated by taking account of the exchange rate, pH and the saturation efficiency. Although researchers have used most commonly in the calculation of CEST asymmetry, a quantitative analysis is also developed by using Lorentzian fitting. The chemical exchange rate was measured in the phantoms made of asparagine (Asn), glutamate (Glu), ${\gamma}-aminobutyric$ acid (GABA), glycine (Gly), and myoinositol (MI). The experiment was performed at a 3T human MRI system with three different acidity conditions (pH 5.6, 6.2, and 7.4) at a concentration of 50 mM. To identify the chemical exchange rate, the "lsqcurvefit" built-in function in MATLAB was used to fit the pseudo-first exchange rate model. The pseudo-first exchange rate of Asn and Gly was increased with decreasing acidity. In the case of GABA, the largest result was observed at pH 6.2. For Glu, the results at pH 5.6 and 6.2 did not show a significant difference, and the results at pH 7.4 were almost zero. For MI, there was no significant difference at pH 5.6 or 7.4, however, the results at pH 6.2 were smaller than at the other pH values. For the experiment at 3T, we were only able to apply 1 s as the maximum saturation duration due to the limitations of the MRI system. The measurement of the chemical exchange rate was limited in a clinical 3T MRI system because of a hardware limitation.

Preliminary Phantom Experiments to Map Amino Acids and Neurotransmitters Using MRI

  • Oh, Jang-Hoon;Kim, Hyug-Gi;Woo, Dong-Cheol;Rhee, Sun Jung;Lee, Soo Yeol;Jahng, Geon-Ho
    • 한국의학물리학회지:의학물리
    • /
    • 제29권1호
    • /
    • pp.29-41
    • /
    • 2018
  • The objective of this study was to evaluate the chemical exchange saturation transfer (CEST) effect of amino acids and neurotransmitters, which exist in the human brain, depending on the concentration, pH, and amplitude of the saturation radiofrequency field. Phantoms were developed with asparagine (Asn), ${\gamma}-aminobutyric$ acid (GABA), glutamate (Glu), glycine (Gly), and myoinositol (MI). Each chemical had three different concentrations of 10, 30, and 50 mM and three different pH values of 5.6, 6.2, and 7.4. Full Z-spectrum CEST images for each phantom were acquired with a continuous-wave radiofrequency (RF) saturation pulse with two different $B_1$ amplitudes of $2{\mu}T$ and $4{\mu}T$ using an animal 9.4T MRI system. A voxel-based CEST asymmetry was mapped to evaluate exchangeable protons based on amide (-NH), amine ($-NH_2$), and hydroxyl (-OH) groups for the five target molecules. For all target molecules, the CEST effect was increased with increasing concentration and B1 amplitude; however, the CEST effect with varying pH displayed a different trend depending on the characteristics of the molecule. On CEST asymmetric maps, Glu and MI were well visualized around 3.0 and 0.9 ppm, respectively, and were well separated macroscopically at a pH of 7.4. The exchange rates of Asn, Glu, BABA, and Gly usually decreased with increasing pH. The CEST effect was dependent on the concentration, acidity of the target molecules, and B1 amplitude of the saturation RF pulse. The CEST effect for Asn can be observed in a 9.4T MRI system. The results of this study are based on applying the CEST technique in patients with neurodegenerative diseases when proteins in the brain are increased with disease progression.

폐단백자원에 이용하기 위한 미생물 Protease의 특성 (Characteristics of Microbial Pretense far Application to Abolished Protein Resource)

  • 천성숙;조영제;성태수;손준호;최청
    • Applied Biological Chemistry
    • /
    • 제41권1호
    • /
    • pp.6-12
    • /
    • 1998
  • 폐단백질을 활용하는 방도의 하나로 폐단백질 자원으로 부터 불용성 단백질의 분리 효율성을 높이고 기능성을 개선하기 위하여 protease를 생산하는 Aspergillus sp. MS-18 균주를 토양으로 부터 분리하고 이 균주가 생산하는 효소를 정제하여 특성을 살펴보았다. 효소 생산을 위한 최적 배양조건은 3% arabinose, 0.5% polypepton, 0.1% ammonium sulfate, 0.1% magnesium chloride 첨가로 3 일 배양이었다. 효소는 ion exchange chromatography, gel filtration 등으로 16.9 배 정제할 수 있었으며 비활성역가는 340.4 unit/mg이었다. 정제효소는 polyacryl amide gel 전기영동상 단일 밴드로 나타났으며, 분자량은 30,000 정도로 추정되었고 결정구조는 모서리가 둥그스럼한 막대 모양이었다. 정제 효소의 최적작용 pH와 온도는 9.0, $60^{\circ}C$였으며, pH 7.0-12.0까지 $50^{\circ}C$에서 안정하였다. 금속이온중 $Na^+$, $Mg^{2+}$, $Mn^{2+}$등에 의해 활성이 증대 되었으나, $Hg^{2+}$, $Cu^{2+}$, $Zn^{2+}$, $Pb^{2+}$에 의해 효소 활성이 저해되었고 저해제중 ethylenediaminetetra acetic acid와 phenyl methanesulfonyl fluoride에 의한 활성 저해가 관찰되어 금속 이온이 효소 활성에 관여하는 serine protease로 추정되었으며 정제효소의 Km, Vmax는 $29.33\;{\mu}mole/L$, $5.13\;{\mu}g/min$이었다.

  • PDF

황다랑어 복부 껍질을 이용한 콜라겐의 제조 및 물리화학적 특성 해석 (Processing and Physicochemical Properties of Collagen from Yellowfin Tuna (Thunnus albacares) Abdominal Skin)

  • 유승재;조승목;우진욱;김상호;한유나;안주련;김수연;김태완;김선봉
    • 한국수산과학회지
    • /
    • 제41권6호
    • /
    • pp.427-434
    • /
    • 2008
  • Processing of collagen from yellowfin tuna (Thunnus albacares) abdominal skins was optimized by response surface methodology and central composite design. The values of independent variables at optimal conditions were NaOH concentration: 0.5 N, NaOH treatment time: 36.2 hr, pepsin concentration: 1:4.9 ratio (0.245%, w/v), and digestion time: 48.1 hr, respectively. The collagen content estimated under optimal conditions was 33.1%, and the actual experimental collagen content was 32.3%. Physicochemical properties of collagen from yellowfin tuna abdominal skin were investigated by amino acids analysis, SDS-PAGE, FT-IR, viscosity and denaturation temperature. Amino acids content of the collagen was 21.0%. SDS-PAGE pattern of the collagen showed two different $\alpha$-chain (${\alpha}_1$- and ${\alpha}_2$- chain), $\beta$-component and $\gamma$-component. The spectrum of FT-IR of the collagen showed wavenumber at 3,434, 1,650, 1,542 and $1,235\;cm^{-1}$ representing the regions of amide A, I, II and III, respectively. Relative viscosity of the collagen decreased continuously on heating up to $32^{\circ}C$, and the rate of decrease was retarded in the temperature range of $35-50^{\circ}C$. Denaturation temperature (Td) of the collagen solution (0.06%, w/v) was $31^{\circ}C$ and was lower than calf skin collagen ($35^{\circ}C$).

기지재의 가교밀도에 따른 유리섬유 복합재료의 염수노화 후 계면 및 기계적 물성 (Interfacial and Mechanical Properties of Glass Fiber Reinforced Epoxy Composites with Different Crosslinking Density after Saline Water Aging)

  • 신평수;김종현;백영민;박하승;권동준;박종만
    • Composites Research
    • /
    • 제31권5호
    • /
    • pp.186-191
    • /
    • 2018
  • 복합재료 기지재의 화학적 조성을 다르게 했을 때 염수처리 후 복합재료의 상태 및 물성을 파악하였다. 기지재는 2가지 종류의 에폭시 기지재와 3가지 종류의 경화제(아민계, 산 무수물계, 그리고 아마이드계) 이용하여 기지재의 유연성을 조절하였다. 각 복합재료에 염수 가속화 실험을 위해 염화나트륨 6 wt% 조건에 $60^{\circ}C$ 가하여 0, 15, 30일 처리하였다. 처리 후에 복합재료의 단면적을 관찰하였고, 기계 및 계면 평가를 실시하였다. 아민계를 이용한 복합재료의 가교밀도, 기계 및 계면 물성이 가장 좋은데 반해, 수분흡수율은 가장 작은 것을 확인하였다. 이는 물분자가 유리섬유와 다른 가교밀도의 에폭시 기지재간의 계면으로 침투가 어렵기 때문이다. 이는 복합재료가 염수에 잘 견딜 수 있는 요인으로 작용할 수 있다.

환경친화적 LE-형 비이온계면활성제를 사용한 반연속식 말브틸-아크릴레이트/메틸메타-아크릴레이트 유화중합에 관한 연구 (Semi-continuous Emulsion Polymerization of n-Butyl acrylate/Methyl metacrylate using Environmental-Friendly LE-Type Nonionic Surfactant)

  • 김철웅
    • 청정기술
    • /
    • 제11권1호
    • /
    • pp.41-50
    • /
    • 2005
  • 본 연구는 환경친화적인 선형 비이온 계면활성제인 LE-형유화제를 사용하여 점착성분의 단량체로 노말부틸 아크릴레이트 (n-butyl acrylate, n-BA)와 응집성분의 단량체로 메틸메타 아크릴레이트 (methyl metacrylate, MMA)를 사용하여, 폴리머 시멘트용 아크릴계 에멀젼 수지를 제조하기 한 최적조건을 얻기 위해 수용액상에서 유화중합을 실시하였다. 실험결과, 사용한 계면활성제 (LE-형)의 친수성인 체인 길이(n)의 값이 증가할수록 응석의 발생이 줄어들어 안정한 폴리머 에멀젼을 얻을 수 있었다. 최종 폴리머 에멀젼의 농도는 이 계면활성제의 사용량을 증가시킴에 따라 증가하다가 어느 농도 이상에서 응석의 발생이 거의 없는 폴리머 에멀젼을 얻을 수 있었으며, 반면에 평균 입자크기도 사용량에 따라 작아지다가 250 nm로 일정한 크기를 나타내었다. 또한 기능성 폴리머로서 보조모노머의 첨가는 최종 폴리머 에멀젼의 응석과 입자크기에 크게 영향을 미쳤는데, 주 모노머에 보조 모노머인 아크릴산 (acrylic acid, AA)과 아크릴 아마이드 (acrylic amide, AM)의 혼합하여 첨가한 경우, 첨가하지 않은 경우에 비해 응석의 발생이 줄어들어 안정한 폴리머 에멀젼을 얻을 수 있었다. 최적조건에서 어진 아크릴 폴리머 에멀젼은 평균 입자크기 200-300 nm, 제타전위 (zeta potential)값 -50 mv 정도였으며, 단일 유리전이온도 (glass temperature, Tg)를 가진 고분자 나노 입자가 수용액상에 잘 분산되어 있음을 알 수 있었다. 따라서 중합조건을 최적화시켜 안정된 폴리머 에멀젼을 얻을 있었다.

  • PDF

Niacin의 상한섭취량 제안 및 식품과 복합비타민제 섭취를 통한 인체 노출평가 (Niacin Upper Level Recommendation and Exposure Assessment of Foods and Multivitamin drugs)

  • 박신희;이효민;윤은경;민충식;김현정;전은아;제금련
    • 한국식품위생안전성학회지
    • /
    • 제20권2호
    • /
    • pp.77-82
    • /
    • 2005
  • 본 연구에서는 식품 단일섭취 또는 식품과 일반의약품으로서의 복합비타민제의 병용섭취를 통해 niacin을 섭취한다는 노출시나리오를 설정하여 우리나라 성인의 niacin 1일 평균섭취량을 산출하였으며, 인체독성자료를 근거로 niacin의 상한섭취량(UL)을 제안하였고 그 값을 비교하여 niacin에 대한 위해지수를 산출하였다. 그 결과 식품 단일섭취 시 위해지수는 0.53,식품과 복합비타민제의 병용섭취 시 위해지수는 0.81-6.24라는 값이 얻어졌다. 일반적으로 위해지수가 1이상이면 건강한 인구집단에서 부작용 발생이 우려됨을 나타낸다 그러므로, 복합비타민제를 병용섭취 하는 일부경우에서는 악영향이 발생할 가능성이 있다고 할 수 있다. 식품을 통한 자연적인 niacin의 섭취로는 악영향이 보고되고 있지 않으나$^{3), 12),}$ 복합비타민제 또는 최근 소비량이 급증하고 있는 비타민 강화 건강기능식품 및 영양보조제 등의 섭취를 통해 niacin으로 인한 악영향의 발생이 우려되므로 지속적이고 세심한 위해성평가와 함께 민감그룹 및 임산부, 수유부 등 특정그룹에 대한 UL설정연구가 이루어져야 할 것으로 생각된다.

Processing Optimization and Physicochemical Characteristics of Collagen from Scales of Yellowfin Tuna (Thunnus albacares)

  • Han, Yuna;Ahn, Ju-Ryun;Woo, Jin-Wook;Jung, Cheol-Kyun;Cho, Sueng-Mock;Lee, Yang-Bong;Kim, Seon-Bong
    • Fisheries and Aquatic Sciences
    • /
    • 제13권2호
    • /
    • pp.102-111
    • /
    • 2010
  • This study was conducted to investigate the optimal conditions of collagen extraction from scales of yellowfin tuna (Thunnus albacares) using surface response methodology. Four independent variables of NaOH concentration and pretreatment fime in alkali pretreatment and enzyme concentration and treatment time in enzyme hydrolysis were used to predict a model equation for the collagen yield. The determinant coefficient ($R^2$) for the equation was 0.906. The values of the independent variables for the maximum yield were 0.32 N NaOH, 16.38 h alkali pretreatment time, 0.18% enzyme concentration, and 31.02 h enzyme treatment time. In the physicochemical properties of tuna scale collagen, sodium dodecyl sulfate-polyacrylamide gel electrophoresis of tuna scale collagen showed the same migration distances as that of calf skin collagen. The amide A, I, II, and III regions of tuna scale collagen in Fourier transform infrared measurements were shown in the peaks of 3,414 $cm^{-1}$, 1,645 $cm^{-1}$, 1,553 $cm^{-1}$, and 1,247 $cm^{-1}$, respectively. The amount of imino acids in tuna scale collagen was 18.97% and the collagen denaturation temperature was $33^{\circ}C$. The collagen solubility as a function of NaCl concentration decreased to 4% NaCl (w/v) and the collagen solubility as a function of pH was high at pH 2-4 and sharply decreased from pH 4 to pH 7. Viscosity of the collagen solution decreased continuously until $30^{\circ}C$ and this decreasing rate slowed in the temperature range of $35-50^{\circ}C$.