• 제목/요약/키워드: Ambiguity Ratio

검색결과 35건 처리시간 0.026초

Flow Characteristics of Liquid Ramjet Engines using Two Color PIV

  • Ahn Kyubok;Yoon Youngbin
    • 한국가시화정보학회:학술대회논문집
    • /
    • 한국가시화정보학회 2001년도 Proceedings of 2001 Korea-Japan Joint Seminar on Particle Image Velocimetry
    • /
    • pp.151-163
    • /
    • 2001
  • A two color PIV technique has been developed for visualization of complex and high speed flow in a ramjet combustor. Two color PIV has the advantages that velocity distributions in high speed flowfields can be measured simply by varying the time interval between two different laser beams and a directional ambiguity problem can be solved by color separation, and then a signal-to-noise ratio can be increased through nearly perfect cross-correlation. As a basic research of the ramjet engine, a 2-D shaped combustor with two symmetric air intakes has been manufactured and an experimental study has been conducted using a two color PIV technique. The flow characteristics such as recirculation zones, intake air mixing and turbulent kinetic energy have been investigated varying inlet angles and dome heights. It was found that the primary recirculation zone is affected mainly by the dome height, whereas the secondary recirculation zone is influenced by the air inlet angle.

  • PDF

Classification of Induction Machine Faults using Time Frequency Representation and Particle Swarm Optimization

  • Medoued, A.;Lebaroud, A.;Laifa, A.;Sayad, D.
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권1호
    • /
    • pp.170-177
    • /
    • 2014
  • This paper presents a new method of classification of the induction machine faults using Time Frequency Representation, Particle Swarm Optimization and artificial neural network. The essence of the feature extraction is to project from faulty machine to a low size signal time-frequency representation (TFR), which is deliberately designed for maximizing the separability between classes, a distinct TFR is designed for each class. The feature vectors size is optimized using Particle Swarm Optimization method (PSO). The classifier is designed using an artificial neural network. This method allows an accurate classification independently of load level. The introduction of the PSO in the classification procedure has given good results using the reduced size of the feature vectors obtained by the optimization process. These results are validated on a 5.5-kW induction motor test bench.

A Hidden Markov Model Imbedding Multiword Units for Part-of-Speech Tagging

  • Kim, Jae-Hoon;Jungyun Seo
    • Journal of Electrical Engineering and information Science
    • /
    • 제2권6호
    • /
    • pp.7-13
    • /
    • 1997
  • Morphological Analysis of Korean has known to be a very complicated problem. Especially, the degree of part-of-speech(POS) ambiguity is much higher than English. Many researchers have tried to use a hidden Markov model(HMM) to solve the POS tagging problem and showed arround 95% correctness ratio. However, the lack of lexical information involves a hidden Markov model for POS tagging in lots of difficulties in improving the performance. To alleviate the burden, this paper proposes a method for combining multiword units, which are types of lexical information, into a hidden Markov model for POS tagging. This paper also proposes a method for extracting multiword units from POS tagged corpus. In this paper, a multiword unit is defined as a unit which consists of more than one word. We found that these multiword units are the major source of POS tagging errors. Our experiment shows that the error reduction rate of the proposed method is about 13%.

  • PDF

Defect Severity-based Defect Prediction Model using CL

  • Lee, Na-Young;Kwon, Ki-Tae
    • 한국컴퓨터정보학회논문지
    • /
    • 제23권9호
    • /
    • pp.81-86
    • /
    • 2018
  • Software defect severity is very important in projects with limited historical data or new projects. But general software defect prediction is very difficult to collect the label information of the training set and cross-project defect prediction must have a lot of data. In this paper, an unclassified data set with defect severity is clustered according to the distribution ratio. And defect severity-based prediction model is proposed by way of labeling. Proposed model is applied CLAMI in JM1, PC4 with the least ambiguity of defect severity-based NASA dataset. And it is evaluated the value of ACC compared to original data. In this study experiment result, proposed model is improved JM1 0.15 (15%), PC4 0.12(12%) than existing defect severity-based prediction models.

The Impact of Insurance Contract on Insurance Complaint Ratios through Text Analysis

  • Jeongkwon Seo;Woojin Yang;Hyejin Mun;Chul Ho Lee
    • Asia pacific journal of information systems
    • /
    • 제31권4호
    • /
    • pp.527-542
    • /
    • 2021
  • The government-driven open data policies are on the rise to protect consumers from misunderstandings and monitor the companies. However, in contract-based industries such as insurance, the contract-inherent characteristics make information asymmetry between consumers and companies. Our paper focuses on insurance contracts where the contingency has high uncertainty of occurrence, and the clauses may incur high costs of reading. Given those contracts, we hypothesized that the contract's clear statement decreases customer dissatisfaction and lowers the number of complaints. To empirically support the claim, we collected customers' complaint documents of insurance companies and insurance contracts from 2005 until 2017. Our econometric models showed that clearer statements and words significantly reduce the complaints after controlling for firm-specific heterogeneity and time-specific heterogeneity. We identify that insurance companies' complaint ratio significantly differ depending on the insurance contract, including specific clauses and words.

논문 : Two Color PIV 기법을 이용한 램제트엔진 연소기 특성에 대한 연구 (Papers : A Study on the Characteristics of the Ramjet Engine Combustor using a Two Color PIV Technique)

  • 안규복;윤영빈;정인석;허환일
    • 한국항공우주학회지
    • /
    • 제30권1호
    • /
    • pp.95-104
    • /
    • 2002
  • 램제트 연소기내의 복잡한 고속 유동의 가시화를 위해 two color PIV 기법을 개발하였다. Two color PIV 기법은 두 레이저 빔 사이의 시간 간격을 ㎲ 단위 이하로 조절할 수 있어 고속 유동에의 적용이 가능할 뿐 아니라, 기록된 필름에서의 색분리를 통하여 방향성의 분제를 해결할 수 있으며, 거의 완벽한 cross-correlation이 가능하여 signal-to-noise ratio가 상당히 증가한다는 장점을 갖게 된다. 본 연구에서는 램제트 엔진에 대한 기초 연구로서 양쪽 대칭의 공기 흡입구를 갖는 2차원 형태의 램제트 엔진 연소기를 제작하였고, two color PIV 기법을 이용하여 실험을 수행하였다. 흡입공기의 연소실내 유입각도와 연소시내 도움 위치에 따른 연소실 형상을 바꾸어가며 재순환 영역과 유입공기의 혼합과 같은 유동 특성을 분석하였다. 유입각도는 전체 유동장 뿐 아니라 재순환 영역의 크기와 재순환 영역내의 공기질량비에 상당한 영향을 끼치나, 도움 높이는 재순환 영역에 큰 영향을 주지 않는다는 것을 알 수 있었다.

농업용 폐비닐의 농가처리 및 수거제도 개선방안 (A Study far Improvement of Disposal and Collection System of Agricultural PE Waste)

  • 강창용
    • 환경정책연구
    • /
    • 제2권1호
    • /
    • pp.51-75
    • /
    • 2003
  • The objective of this study is to analyze the problems of disposal and collection, including administrative management of agricultural PE waste and suggest effective management measurements. Information regarding problems of agricultural PE waste management were collected from field survey of farmers, regional governments and officials. On the national level, the low ratio of collection for optimal treatment of agricultural PE waste is a critical problem. , the negative discharging behavior of farmers, an illegal incineration and landfill of farmers and a lack of education and extension etc. An ambiguity of the management principle to agricultural PE waste, the differences in management among the regional governments, a lack of will of the regional governments and officials to realize SARD and lack of education and extension etc. are some of the problems in administrative management of agricultural PE waste collection. The major suggestions of this study are as follows : (1) to strengthen education and extension, (2) to adopt an improved economic incentive system and strong, lawful regulation simultaneously, (3) to use temporang collection and permanent collection site, and (4) to organize "OTC(Optimal Treatment Conference)" composed of farmers, regional cooperative, PE producers etc. for operating an effective management system.

  • PDF

광역관측을 위한 영상레이더 TOPS 모드 설계 기법 (Design Technique for Wide Swath SAR TOPS imaging Mode)

  • 김세영;성진봉;이동우;심상흔
    • 한국항공우주학회지
    • /
    • 제43권5호
    • /
    • pp.466-471
    • /
    • 2015
  • 본 논문에서는 광역 관측을 위하여 새롭게 제안되고 있는 TOPS SAR 운용기법에 대한 모드 설계 및 성능 분석을 수행하였다. TOPS 모드는 기존 ScanSAR 모드의 단점인 scalloping을 개선하기 위하여 새롭게 제안된 모드로서, SAR 진행방향으로 안테나 빔을 조향하면서 영상 데이터를 획득하는 새로운 SAR 영상 획득 기술이다. 본 논문에서는 TOPS 모드에 대한 기술적 운용 개념을 소개하고, SAR 운용 변수를 추출하기 위한 모드 설계 결과를 제시한다. 또한 설계된 모드 변수를 이용하여 SAR 주요 성능인 IRF, NESZ, 및 DTAR을 분석하여 제시한다.

Joint Blind Parameter Estimation of Non-cooperative High-Order Modulated PCMA Signals

  • Guo, Yiming;Peng, Hua;Fu, Jun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권10호
    • /
    • pp.4873-4888
    • /
    • 2018
  • A joint blind parameter estimation algorithm based on minimum channel stability function aimed at the non-cooperative high-order modulated paired carrier multiple access (PCMA) signals is proposed. The method, which uses hierarchical search to estimate time delay, amplitude and frequency offset and the estimation of phase offset, including finite ambiguity, is presented simultaneously based on the derivation of the channel stability function. In this work, the structure of hierarchical iterative processing is used to enhance the performance of the algorithm, and the improved algorithm is used to reduce complexity. Compared with existing data-aided algorithms, this algorithm does not require a priori information. Therefore, it has significant advantage in solving the problem of blind parameter estimation of non-cooperative high-order modulated PCMA signals. Simulation results show the performance of the proposed algorithm is similar to the modified Cramer-Rao bound (MCRB) when the signal-to-noise ratio is larger than 16 dB. The simulation results also verify the practicality of the proposed algorithm.

AN IN-SITU YOUNG'S MODULUS MEASUREMENT TECHNIQUE FOR NUCLEAR POWER PLANTS USING TIME-FREQUENCY ANALYSIS

  • Choi, Young-Chul;Yoon, Doo-Byung;Park, Jin-Ho;Kwon, Hyun-Sang
    • Nuclear Engineering and Technology
    • /
    • 제41권3호
    • /
    • pp.327-334
    • /
    • 2009
  • Elastic wave is one of the most useful tools for non-destructive tests in nuclear power plants. Since the elastic properties are indispensable for analyzing the behaviors of elastic waves, they should be predetermined within an acceptable accuracy. Nuclear power plants are exposed to harsh environmental conditions and hence the structures are degraded. It means that the Young's modulus becomes unreliable and in-situ measurement of Young's modulus is required from an engineering point of view. Young's modulus is estimated from the group velocity of propagating waves. Because the flexural wave of a plate is inherently dispersive, the group velocity is not clearly evaluated in temporal signal analysis. In order to overcome such ambiguity in estimation of group velocity, Wigner-Ville distribution as the time-frequency analysis technique was proposed and utilized. To verify the proposed method, experiments for steel and acryl plates were performed with accelerometers. The results show good estimation of the Young's modulus of two plates.