• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.179-185
• /
• 2012

Since the eco-era is getting closer, the importance of noise reducing in the passenger cars of high-speed train is very important. The active noise control is best choice to reduce low frequency noise because the passive one is too heavy for high speed trains where weight is so critical. Also ANC is able to reduce the ambient noise when the environmental-factor changes. To reduce a three-dimensional closed-space sound field like a car of a high-speed rail is hard to do using single channel ANC control system. We used multi-channel FXLMS algorithm which calculation speed is fast and the secondary path estimation is possible in order to take into account the physical delay in electro acoustic hardware control loudspeaker and power amplifier. Firstly, we have measured interior noise of KTX and estimated noise path in KTX test-bed. However there was some problem related to algorithm divergence and increasing the filter order. We have made a simulation of interior environment of KTX car by using three frequency bands of 120Hz, 280Hz, 360Hz as the most important for KTX ANC system. During this research the interior noise reduction of KTX car was made by using the multi-channel FXLMS algorithm. Reduction performance was evaluated and compared each other for open space section and tunnel section. in-situ experiment for the KTX noise reduction by proposed ANC was performed based on data obtained in simulation and they were compared for open space section and tunnel section as well.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.68-74
• /
• 1997

Ship radiated noise is an infortant parameter which dtermines Anti Submarine Warfare(ASW) countermeansure or passive Sonar detection and classification performance. Its measurement should be performed under controlled ocean acoustic environment. In data reduction of the measured data from hydrophone array, theeffect fo ambient noise, surface reflection and bottom reflection etc. should be compensated to obtain the source level of the ship radiated noise. This study describes the measurement hydrophone array design criteria based on the analysis of transimission anomaly due to the surface reflection.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.4
• /
• pp.207-214
• /
• 2011

Human auditory acuity decreases naturally due to aging. But recently cases of impaired hearing at a young age are increasing greatly. The biggest reason for such an increase of population with impaired hearing is popularization of various kinds of portable multimedia appliances. Many studies on impaired hearing due to noises caused by the earphone and headphone are being made, but there are few studies on noise-impaired hearing caused directly by mobile phone communication. Based on a precedent inquiry, this study proposes a technique for preventing noise-impaired hearing applying to an active noise reduction technique onto bone conduction speaker. This technique is a method for reducing noises by antiphase oscillation through bone conduction speaker with ambient noises. If the proposed system is applied, the noise level that is actually introduced to audition decreases by more than 12 dB, and such a decreased amount of sound volume fundamentally prevents the factors of noise-caused hearing difficulty due to mobile phone communication. Sensibility test results showed that adequate communication was possible even in such a situation where communication volume was decreased like this.

• Smart Structures and Systems
• /
• v.17 no.3
• /
• pp.471-489
• /
• 2016

Modal identification based on ambient vibration data has attracted extensive attention in the past few decades. Since the excitation for ambient vibration tests is mainly from the environmental effects such as wind and traffic loading and no artificial excitation is applied, the signal to noise (s/n) ratio of the data acquired plays an important role in mode identifiability. Under ambient vibration conditions, certain modes may not be identifiable due to a low s/n ratio. This paper presents a study on the mode identifiability of an instrumented cable-stayed bridge with the use of acceleration response data measured by a long-term structural health monitoring system. A recently developed fast Bayesian FFT method is utilized to perform output-only modal identification. In addition to identifying the most probable values (MPVs) of modal parameters, the associated posterior uncertainties can be obtained by this method. Likewise, the power spectral density of modal force can be identified, and thus it is possible to obtain the modal s/n ratio. This provides an efficient way to investigate the mode identifiability. Three groups of data are utilized in this study: the first one is 10 data sets including six collected under normal wind conditions and four collected during typhoons; the second one is three data sets with wind speeds of about 7.5 m/s; and the third one is some blind data. The first two groups of data are used to perform ambient modal identification and help to estimate a critical value of the s/n ratio above which the deficient mode is identifiable, while the third group of data is used to perform verification. A couple of fundamental modes are identified, including the ones in the vertical and transverse directions respectively and coupled in both directions. The uncertainty and s/n ratio of the deficient mode are investigated and discussed. A critical value of the modal s/n ratio is suggested to evaluate the mode identifiability of the deficient mode. The work presented in this paper could provide a base for the vibration-based condition assessment in future.

• Computers and Concrete
• /
• v.27 no.1
• /
• pp.29-39
• /
• 2021

This study aimed to develop a method for the determination of the damaged story in reinforced concrete (RC) structure with ambient vibrations, based on modified jerk energy methodology. The damage was taken as a localized reduction in the stiffness of the structural member. For loading, random white noise excitation was used, and dynamic responses from the finite element model (FEM) of 4 story RC shear frame were extracted at nodal points. The data thus obtained from the structure was used in the damage detection and localization algorithm. In the structure, two damage configurations have been introduced. In the first configuration, damage to the structure was artificially caused by a local reduction in the modulus of elasticity. In the second configuration, the damage was caused, using the Elcentro1940 and Kashmir2005 earthquakes in real-time history. The damage was successfully detected if the frequency drop was greater than 5% and the mode shape correlation remained less than 0.8. The results of the damage were also compared to the performance criteria developed in the Seismostruct software. It is demonstrated that the proposed algorithm has effectively detected the existence of the damage and can locate the damaged story for multiple damage scenarios in the RC structure.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.949-958
• /
• 2018

A voice recognition control system is a system for controlling a peripheral device by recognizing a voice. Recently, a voice recognition control system have been applied not only to smart devices but also to various environments ranging from IoT(: Internet of Things), robots, and vehicles. In such a voice recognition control system, the recognition rate is lowered due to the ambient noise in addition to the voice of the user. In this paper, we propose a dual channel acoustic beamforming hardware architecture for MEMS(: Microelectromechanical Systems) microphones to eliminate ambient noise in addition to user's voice. And the proposed hardware architecture is designed as ASIC(: Application-Specific Integrated Circuit) using TowerJazz $0.18{\mu}m$ CMOS(: Complementary Metal-Oxide Semiconductor) technology. The designed dual channel acoustic beamforming ASIC has a die size of $48mm^2$, and the directivity index of the user's voice were measured to be 4.233㏈.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.369.1-369
• /
• 2002

In order to verify the effectiveness of adding viscoelastic dampers to full-scale steel frame structure on the reduction of their seismic and wind response, a experimental work was carried out. First, The test was conducted on the VE dampers subjected to sinusoidal excitations under a variety of ambient temperatures, frequency, and the damper strain. Results from these tests showed that the viscoelastic dampers have high energy dissipation capacity Second, (omitted)

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.11
• /
• pp.890-896
• /
• 2003

It is said that the goal of the design of good acoustical environment is at first the reduction of undesirable sounds. and in addition the introduction of desirable sounds by which our minds are soothed. The task of creating the desirable sounds leads to the realization of a comfortable acoustic environment and the design of soundscape. It may be an important starting point of soundscape design to select suitable sounds for the target spaces. because each space has a different surrounding condition and requires a special ambient sound. This paper aims to survey preference of the environmental sounds suitable for the public spaces in urban areas such as parks. bus terminals. 35 kinds of natural sounds are. rated by 26 pairs of adjectives. The results of psycho-acoustic experiments are as follows. 1. The proper adjectives for expressing the environmental sounds are classified into 6 groups of comfort, pleasure, fullness. variety, distinctness. and naturalness. 2. Bird singing. murmuring of a stream, artificial sounds. singing of insects and animals are the affirmative rank of preference. 3. Green musics consisted of music and natural sounds are preferred to the pure natural sounds. 4. Sound level relative to background noise causes various preferences to natural sounds in public spaces.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.5
• /
• pp.44-52
• /
• 2012

Fuel cell electric vehicles have some noise problems due to its air processing unit which is required to feed the ambient air into the fuel cell stack. Discrete-frequency noises are radiated from a centrifugal blower due to rotor-stator interaction. Their fundamental frequency is the blade passing frequency, which is determined by the number of rotor blades and their rotating speed. To reduce such noises, multi-chamber perforated muffler has been designed. In this paper, in order to improve the transmission loss of a perforated muffler, the relationship between the impedance model of a perforated hole and its noise reduction performance is studied, and the applicability of a short-length perforated muffler to air processing unit of fuel cell system is described using acoustic simulation results and experimental data. The acoustic velocity vector across the neck of a perforated hole is very important design factor to optimize the transmission of an intake muffler. The suggested short-length perforated muffler is effective on discrete-frequency noises while keeping the volume of intake muffler minimized.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1010-1013
• /
• 2003

It is said that the goal of the design of good acoustical environment is at first the reduction of undesirable sounds, and in addition the introduction of desirable sounds by which our minds are soothed. The task of creating the desirable sounds leads to the realization of a comfortable acoustic environment and the design of soundscape. It may be an important starting point of soundscape design to select suitable sounds for the target spaces, because each space has a different surrounding condition and requires a special ambient sound. This paper aims to survey preference of the environmental sounds suitable for the public spaces in urban areas such as parks, bus terminals. 35 kinds of natural sounds are rated by 26 pairs of adjectives. The results of psycho-acoustic experiments are as follows. 1. The proper adjectives for expressing the environmental sounds are classified into 6 groups of comfort, pleasure, fullness, variety, distinctness, naturalness. 2. Bird singing, murmuring of a stream, artificial sounds, singing of insects and animals are the affirmative order of preference. 3. Green musics consisted of music and natural sounds are preferred to the pure natural sounds. 4. Sound level relative to background noise causes various preferences to natural sounds in public spaces.