• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.671-678
• /
• 2001

All solid-state thin film micro supercapacitor, which consists of $RuO_2$/LiPON/$RuO_2$ multi layer structure, was fabricated on Pt/Ti/Si substrate using a $RuO_2$ electrode. Bottom $RuO_2$ electrode was grown by dc reactive sputtering system with increasing $O_2/[Ar+O_2]$ ratio at room temperature, and a LiPON electrolyte film was subsequently deposited on the bottom $RuO_2$ electrode at pure nitrogen ambient by rf reactive sputtering system. Room temperature charge-discharge measurements based on a symmetric $RuO_2$/LiPON/$RuO_2$ structure clearly demonstrates the cyclibility dependence on the microstructure of the $RuO_2$ electrode. Using both glancing angle x-ray diffraction (GXRD) and transmission electron microscopy (TEM) analysis, it was found that the microstructure of the $RuO_2$ electrode was dependent on the oxygen flow ratio. In addition, x- ray photoelectron spectroscopy(XPS) examination shows that the Ru-O binding energy is affected by increasing oxygen flow ratio. Furthermore, TEM and AES depth profile analysis after cycling demonstrates that the interface layer formed by interfacial reaction between LiPON and $RuO_2$ act as a main factor in the degradation of the cyclibility of the thin film micro-supercapacitor.

• The Journal of Bigdata
• /
• v.4 no.1
• /
• pp.63-72
• /
• 2019

For power energy, optimal generation and distribution plans based on accurate demand forecasts are necessary because it is not recoverable after they have been delivered to users through power generation and transmission processes. Failure to predict power demand can cause various social and economic problems, such as a massive power outage in September 2011. In previous studies on forecasting power demand, ARIMA, neural network models, and other methods were developed. However, limitations such as the use of the national average ambient air temperature and the application of uniform criteria to distinguish seasonality are causing distortion of data or performance degradation of the predictive model. In order to improve the performance of the power demand prediction model, we divided Korea into five major regions, and the power demand prediction model of the linear regression model and the neural network model were developed, reflecting seasonal characteristics through regional characteristics and migration period learning techniques. With the proposed approach, it seems possible to forecast the future demand in short term as well as in long term. Also, it is possible to consider various events and exceptional cases during a certain period.

• Journal of Bio-Environment Control
• /
• v.12 no.4
• /
• pp.200-206
• /
• 2003

Pleurotus eryngii(King oyster) is one of the most promising mushrooms produced on the domestic farms. The quality as well as quantity of Eryngii is sensitively affected by micro climate factors such as temperature, relative humidity, $CO_2$ concentration, and light intensity. To safely produce high-quality Eryngii all the year round, it is required that the environmental factors be carefully controlled by well designed structures equipped with various facilities and control systems. At the commercial mushroom cultivation house(A,B), this study was carried out to find out reasonable range of each environmental factor and yield together with economic and safe structures influencing on the optimal productivity of Eryngii. this experiment was conducted for about two-month from Nov. 11, 2002 to Dec. 30, 2002 in Eryngii. cultivation house-A, B. Ambient temperature during the experiment period was not predominantly different from that of a normal year. The capacity of the hot water boiler and the piping systems were not enough. Maximum air temperature difference between the upper and lower growth stage during a heating time zone was about 2~3$^{\circ}C$. The max. and min. relative humidity were ranged approximately 60~100%, and average relative humidity was ranged approximately 80~100%. And $CO_2$concentration increased until maximum 1,600~1,800 ppm with the passing growing period. The illuminance in cultivation house was widely distributed from 20lx to 160 lx in accordance with position, and it was maintained lower than the recommended illuminance range 100~200 lx. The average yield per bottle was about 67~85g. But the optimal productivity will be evaluated by considering the quality and quantity of mushroom production, energy requirements, facility construction and management cost, etc.

• Journal of Radiation Protection and Research
• /
• v.38 no.3
• /
• pp.143-148
• /
• 2013

Operational nuclear facilities such as nuclear power plants and particle accelerators show various neutron spectra according to the type of facilities and specific position. Necessities of neutron dose management and neutron monitoring for radiation protection of radiation workers in such a kind of facilities have continuously increased in recent years. Bonner sphere spectrometers are widely used for measurement of neutron spectra. Data on response function of neutron detector, default neutron spectra and count rates of Bonner sphere spectrometer are required to obtain unfolded neutron spectra in specific workplaces. In this study, we carried out measurement of neutron spectra produced in MC50 cyclotron using Bonner sphere spectrometer with LiI scintillation detector. Additionally, we estimated quantitative data on neutron flux, mean neutron energy and ambient dose equivalent rate according to the incident proton energies and positions in MC50 cyclotron.

• Korean Journal of Poultry Science
• /
• v.9 no.1
• /
• pp.1-16
• /
• 1982

Excessive fat deposition, particularly in the abdominal region, has become a problem in broiler production. When the caloric intake exceeds the body demands for energy, excess food is stored as fat in broilers. Researchers have shown that fat deposition varies with breed, strain, sex age, nutrition, exercise, ambient temperature and rearing systems. These factors affect fat deposition through their effects on the size or the number of adipose cells or a combination of both. In some measurements on live birds to predict body fat, the wet weight and percentage fat of skin in pectoral feather tract are significantly correlated with percentage abdominal fat. But these correlation coefficients are not so high. Therefore, correlation coefficients indicate that these measurements on live birds ate not useful for estimating body fat weight and percentage. Most reports show that an increase in the proportion of carcass fat, when measured at a given age, is correlated with selection for increased body weight. On the other hand some research results show that selection for body$.$weight gain dose not lead to an alteration in the proportion carcass fat when measured at a given body weight. Besides, selection for improved food conversion efficiency alone resulted in a decrease in carcass fat and an increase in protein and water when measured at either a given age or body weight, Thus eventhough it is uncertain whether carcass fat is increasing as a result of body-weight selection in broilers: however it is clear that selection for improved food conversion efficiency, either alone or in combination with growth rate, should result in leaner carcasses than selection for growth rate alone.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.170-170
• /
• 2010

Thin-film transistors (TFT) have become the key components of electronic and optoelectronic devices. Most conventional thin-film field-effect transistors in display applications use an amorphous or polycrystal Si:H layer as the channel. This silicon layers are opaque in the visible range and severely restrict the amount of light detected by the observer due to its bandgap energy smaller than the visible light. Therefore, Si:H TFT devices reduce the efficiency of light transmittance and brightness. One method to increase the efficiency is to use the transparent oxides for the channel, electrode, and gate insulator. The development of transparent oxides for the components of thin-film field-effect transistors and the room-temperature fabrication with low voltage operations of the devices can offer the flexibility in designing the devices and contribute to the progress of next generation display technologies based on transparent displays and flexible displays. In this thesis, I report on the dc performance of transparent thin-film transistors using amorphous indium tin zinc oxides for an active layer. $SiO_2$ was employed as the gate dielectric oxide. The amorphous indium tin zinc oxides were deposited by RF magnetron sputtering. The carrier concentration of amorphous indium tin zinc oxides was controlled by oxygen pressure in the sputtering ambient. Devices are realized that display a threshold voltage of 4.17V and an on/off ration of ${\sim}10^9$ operated as an n-type enhancement mode with saturation mobility with $15.8\;cm^2/Vs$. In conclusion, the fabrication and characterization of thin-film transistors using amorphous indium tin zinc oxides for an active layer were reported. The devices were fabricated at room temperature by RF magnetron sputtering. The operation of the devices was an n-type enhancement mode with good saturation characteristics.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.384-384
• /
• 2009

최근 태양전지 개발이 본격화 되면서 태양전지 웨이퍼 표면에서의 재결합에 의한 손실을 줄이고 반사도를 감소시키기 위한 ARC 개발이 활발히 진행되고 있다. 이를 위해 널리 사용하는 ARC 물질로 수소화된 실리콘 질화막이 있다. 수소화된 실리콘 질화막은 PECVD 법으로 저온에서 실리콘 기판 위에 증착 가능한 장점이 있다. 또한 실리콘 질화막의 광학적, 전기적인 특성은 화학적 조성비에 의해 결정되며 증착온도 가변에 따라 균일도 및 굴절률 조절을 가능케 하여 태양전지의 효율을 향상 시킬 수 있다. 따라서 본 연구에서는 수소화된 실리콘 질화막을 태양전지에 적용하기 위해 질소 가스 분위기에서 PECVD를 이용하여 증착하고 그 특성을 분석하였다. 박막은 0.8 Torr의 압력에서 $150^{\circ}C{\sim}450^{\circ}C$의 기판 온도로 증착되었으며 이때의 RF power은 100W ~ 300W로 가변 하였다. 증착된 박막은 1.94 에서 2.23의 폭넓은 굴절률 값을 가지고 있었다. $SiH_4/NH_3$ 가스 비의 증가에 따라 박막 두께와 굴절률이 감소함을 확인 할 수 있었다. 이는 $NH_3$ 가스의 상대적인 증가에 따라 Si 생성을 선행하는 $SiH_4$ 가스의 부분압이 제한되기 때문이고, 이러한 결과로 박막내에 질소 원자가 증가함에 따라 N-H 결합이 증가하여 n-rich인 박막 상태가 되기 때문으로 분석된다. 증착된 실리콘 질화막의 소수반송자 수명 측정 결과 굴절률 2.23인 박막의 경우 약 87 us의 수명을 나타냈으며, 굴절률이 1.94로 줄어듦에 따라 소수반송자 수명 역시 79 us로 감소하였다. 수소화된 실리콘 질화막은 n-rich 보다 Si-rich 인 경우 effective 반송자 수명을 증가시켜 표면 재결합 속도를 줄이는데 유용함을 확인하였다. 또한 증착온도가 증가할수록, RF power가 증가 할수록 소수반송자 수명 역시 증가하였다. 반사도의 경우 $SiH_4$의 비율이 증가할수록 반사도가 감소함을 확인 하였으며, 증착온도 증가에 따라, RF power 증가에 따라 반사도가 감소하였다. 결과적으로 $450^{\circ}C$의 기판온도와 300W의 RF power에서 증착된 실리콘 질화막의 경우 가장 우수한 전기적, 광학적 특성을 보여주었다.

• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.131-135
• /
• 2009

The identification characteristics of irradiated commercial Ramen soup were investigated depending on radiation sources and doses by electron spin resonance (ESR) spectroscopy. Two commercial powder soups (RS-1, RS-2) were irradiated at 0 to 20 kGy under ambient conditions by both a Co-60 gamma irradiator and an electron beam (EB) accelerator, respectively. Crystalline sugar-induced multi-component signals with g-values of 2.010/2.011, 2.006, 2.002 and 1.999 were detected in the irradiated Ramen soup (RS-1, RS-2), whereas $Mn^{2+}$ signals were observed in non-irradiated samples, thereby distinguishing each other. Under the same analytical conditions, the intensity of ESR signals was higher in EB-irradiated samples than the gamma-irradiated ones. Determination coefficients ($R^2$) between irradiation doses and corresponding ESR responses were above 0.9665 in all the samples, and the magnetic field of specified g-value remained constant. The predominant ESR signals of $g_2$ (2.010-2.011) and $g_3$ (2.002) increased with corresponding doses of irradiation ($R^2$= 0.9750-0.9981).

• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.547-551
• /
• 1994

A series of samples in the $Nd_{1-x}Ba_xFeO_{3-y}$ system has been prepared by heating the reactants to$1200^{\circ}C$ under an ambient atmosphere, and the solid solutions were identified by X-ray power diffraction analysis. The crystal systems of samples with x = 0.00 and 0.25 were found to be orthorhombic whose local symmetry is similiar to the distorted octahedral with orthoferrite type one, whereas those with x = 0.50 and 0.75 to be the cubic system. Since Fe ions in the solid solutions are a mixed valence state between $Fe^{3+}\;and\;Fe^{4+}$ ions, the nonstoichiometric chemical formulas could be determined from the mole ratio of $Fe^{4+}$ ion and oxygen vacacies. According to the Mossbauer spectroscopic analysis, the presence of 5-coordinated $FeO_5$ was evidenced only in the barium compounds along with $FeO_6,\;and\;FeO_4$, but not in the strontium and calcium compounds. The samples with x = 0.25 and 0.50 show a spectrum of superparamagnetism, which might be due to the formation of a domain of the ferromagnetic interaction between the $Fe^{3+}\;and\;Fe^{4+}$ ions. The electrical conductivities of all samples are within semiconducting range. Since the $Fe^{4+}$ ion acts as an electron acceptor level during the electron transfer between the Fe through intermediate $O^{2-}$ ions, the activation energy of the compounds decreases with the increment of $Fe^{4+}$ content.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.89-95
• /
• 2010

The chalcopyrite $Cu(In_xGa_{(1-x)})Se_2$ (CIGS) is considered to be one of the effective light-absorbing materials for thin film photovoltaic solar cells. We describe the electrodeposition of CIGS thin films in ambient laboratory conditions, and suggest the electrochemical conditions to prepare stoichiometric CIGS thin films of Ga/(In + Ga) = 0.3. In acidic solutions containing $Cu^{2+}$, $In^{3+}$, $Ga^{3+}$ and $Se^{4+}$ ions, the CIGS films of different Cu/In/Ga/Se chemical compositions were electrodeposited onto Mo/Glass substrate. The structure, morphology and chemical composition of electrodeposited CIGS films were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Energy dispersive X-ray spectroscopy (EDS), respectively.