• Membrane and Water Treatment
• /
• v.6 no.6
• /
• pp.439-449
• /
• 2015

Carbolic Acid which is called phenol is one of the important starting and/or intermediate materials in various industrial processes. However, its excessive release into environment poses a threat to living organisms, as it is a highly carcinogens and hazardous pollutant even at the very low concentration. Thus removal of phenol from polluted environments is very crucial for sustainable remediation process. We developed a low cost adsorption method for separating phenol from a model aqueous solution. The phenol adsorption was studied using two adsorbents i.e., Amber lite XAD-16 and Amber lite XAD-7 HP with a constant amount of resin 0.1 g at varying aqueous phenol concentrations ($50-200mgL^{-1}$) at room temperature. We compared the efficacy of two phenol adsorbents for removing higher phenol concentrations from the media. We investigated equilibrium and kinetics studies of phenol adsorption employing Freundlich, Temkin and Langmuir isotherms. Amberlite XAD-16 performed better than Amberlite XAD-7 HP in terms of phenol removal efficiency that amounted to 95.52%. Pseudo second order model was highly fitted for both of the adsorption systems. The coefficient of determination ($R^2$) with Langmuir isotherm was found to be 0.98 for Amberlite XAD-7 HP. However, Freundlich isotherm showed $R^2$ value of 0.95 for Amberlite XAD-16, indicating that both isotherms could be described for the isotherms on XAD-7 HP and Amberlite XAD-16, respectively.

• Journal of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.267-279
• /
• 1990

The adsorption mechanisms of phenols on XAD-2 and XAD-7 resins were studied by using the distribution coefficient(log Kd) measured in the optimum adsorption conditions. It was observed that the Langmuir adsorption isotherm, indicating a molecular size-dependent adsorption, was appropriate for characterizing the adsorption behaviors of phenols on XAD-2 and XAD-7 resins. The adsorption energies of phenols on XAD resins were calculated by Lennard-Jones potential equation. In the calculation of the adsorption energy, the molecular radii and dipole moments of the resins and phenols were calculated by their van der Waals volumes and Debye equation, respectively. The stacking factor (F) were determined from the radio of the equilibrium distance to the stacking distance of molecules. In order to explain the adsorption energy calculated from the stacking factor it was compared with the adsorption enthalpy for each of phenols which was experimentally determined by batch adsorption shake method. It was observed that the adsorption enthalpy of phenolate ions on the XAD resins was likely to be more seriously affected by dispersion interaction than by a dipole or a charge interaction.

• Journal of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.397-405
• /
• 1985

The adsorption behaviors of some oxime compounds well known as metal chelating agents on the Amberlite XAD resins were compared by measuring their distribution coefficients (log Kd) in various media, respectively. Among the oxime compounds, salicylaldoxime (SAO) and $\alpha-benzoinoxime(${\alpha}$-BzO)$ which showed large log Kd values were chosen. The characteristics of XAD-4 resins impregnated with SAO and ${\alpha}$-BzO have been studied to apply them for the adsorption and recovery of minute quantities of metal ions in aqueous solution. The optimum conditions for adsorption of SAO and ${\alpha}$-BzO on the resin were 30% methanol media having pH range of 1~8(for SAO) and 1~9 (for ${\alpha}$-BzO), respectively. The distribution coefficients of two oxime compounds were decreased as temperature increased. From the adsorption enthalpy data of SAO and ${\alpha}$-BzO, ranging from 4.96 to 6.66 Kcal/mol, it is suggested that their adsorption mechanism on XAD-4 resin is likely due to molecular adsorption equivalent to dipole-dipole interaction. The impregnated resins were considerably stable in the aqueous solutions of pH 5.0~10.0 and in 0.1~5M hydrochloric acid solutions. The former is the medium for adsorption of metal ions, while the latter is for recovery of the adsorbed metal ions. The adsorption mole ratio of Mn(II), Co(II), Ni(II), Zn(II) ions on SAO-XAD-4 and ${\alpha}$-BzO-XAD-4 resins were about 1 : 2 at the optimum conditions, respectively. The adsorbed metal ions were recovered completely by eluting with 3M HCl-50% methanol solution

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1375-1382
• /
• 2007

A column preconcentration method with pulverized Amberlite XAD-4 loaded with bismuthiol I (BI) has been developed for the determination of trace Cd(II) and Cu(II) in various real samples by flame atomic absorption spectrophotometry. Various experimental conditions, such as the size of XAD-4, adsorption flow rate, amount of bismuthiol I, stirring time for adsorbing bismuthiol I on XAD-4, pH of sample solution, amount of XAD-4- BI, desorption solvent, and desorption flow rate, were optimized. Also, the adsorption capacity and the adsorption rate of Cd(II) and Cu(II) on XAD-4-BI were investigated. The interfering effects of various concomitant ions were investigated, Bi(III), Sn(II) and Fe(III) were found to affect the determination. But the interference by these ions was completely eliminated by adjusting the amount of XAD-4-BI resin to 0.70 g, although the adsorption flow rate was slower. For Cd(II) our proposed technique obtained a dynamic range of 0.5-40 ng mL-1, a correlation coefficient (R2) of 0.9913, and a detection limit of 0.3 ng mL-1. For Cu(II), the corresponding values were 2.0-120 ng mL-1, 0.9921 and 1.02 ng mL-1. To validate this proposed technique, the aqueous samples (stream water, reservoir water, tap water and wastewater), the diluted brass sample and the plastic sample, as real samples, were used. Recovery yields of 91-103% were obtained. These measured data were not different from ICP-MS data at 95% confidence level. Our proposed method was also validated using rice flour CRM (normal, fortified) samples. From the results of our experiment, we found that the technique we present here can be applied to the determination of Cd(II) and Cu(II) in various real samples.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.308-314
• /
• 1987

The adsorption behavior of some chelating agents on the Amberlite XAD-7 resin was studied to obtain the optimum conditions for the preparation of chelating agent-XAD-7 resins. The chosen chelating agents are cupferron (CP), diphenylcarbazone (DPC), salicylaldoxime (SAO), thiosalicylic acid (TSA), and dimethylglyoxime (DMG), which have been well known chelating agents to Cu(Ⅱ) and Ni (Ⅱ) ions. Among the chelating agent-XAD-7 resins, SAO-XAD-7 and DMG-XAD-7 resins were evaluated as appropriate impregnated resins by investigating their stabilities in the wide pH range and high abilities to adsorb Cu(Ⅱ) and Ni(Ⅱ) ions. The selective adsorption of Cu(Ⅱ) from Ni(Ⅱ) was possible by changing pH condition by SAO-XAD-7 resin. The adsorption capacities of SAO-XAD-7 and DMG-XAD-7 for Cu(Ⅱ) were $7{\times}10^{-3}mmol$ Cu(Ⅱ) per gram of resin and $2{\times}10^{-3}mmol$ Cu(Ⅱ) per gram of resin, respectively. The quantitative recovery of Cu(Ⅱ) adsorbed by the resin was demonstrated. The adsorption behavior of Cu(Ⅱ) and Ni(Ⅱ) by the single and mixed bed of chelating agent-XAD-7 resin was discussed.

• Journal of Environmental Science International
• /
• v.5 no.3
• /
• pp.369-376
• /
• 1996

The adsorption of the anionic surfactants, sodium lauryl sulfate (SLS) and sodium dodecylbenzene sulfonate (SDBS) anion surfactants form aqueous solutions with nonionic resins, Amberlite XAD-2, XAD-4 and XAD-7 at temperatures in 15~45$^{\circ}C$ range was studied. Several adsorption isotherm models were used to fit the experimental data, The best results were obtained with the Redlich-Peterson equation and the Freundlich model provided remarkably good fits. For a particular resin at a particular temperature, SDBS was more extensively adsorbed than SLS. The highest adsorption were obtained with XAD-4 resin and the specific surface area of the resins plays a major role in adsorption of the surfactants. Estimations of the isosteric heat of adsorption were indicative of an exothermic process, and their magnitudes manifested a physisorption process.

• Journal of the Korean Chemical Society
• /
• v.45 no.4
• /
• pp.304-311
• /
• 2001

A study has been carried out on the extraction chromatographic separation of fission products from spent pressurized water reactor (PWR) fuels for inductively coupled plasma atomic emission spectrometric analysis. Impregnation capacity of tri-n-butyl phosphate (TBP), which is well known as an extractant in the field of uranium separation from various nuclear grade materials, on Amberlite XAD polymeric macroporous support materials was measured. Amberlite XAD-16 of which the surface area is the highest was selected as a support material because its TBP impregnation capacity was the largest in Amberlite XADs. Sorption behaviour of this TBP impregnated resin was investigated for the fission product elements using acidic solutions simulated for dissolver solutions of spent PWR fuels. The parameters affecting the performance of the separation system were optimized. The fission product elements studied excluding Pd and Ru were quantitatively recovered with the precision of less than 3.1%.

• Journal of the Korean Chemical Society
• /
• v.43 no.5
• /
• pp.522-526
• /
• 1999

2-Hydroxybenzaldehyde-5-nitro-pyridylhydrazone (2HB-5NPH) was synthesized and its application to the spectrophotometric determination of iron was studied. The reagent reacts with iron in the pH range 6.0-7.5 to form a yellow coIored 1:2 chelate which is very stable in methanol solution. Beer's law is obeyed in the concentration range 0.05∼2.0 ${\mu}gmL^{-1}$ iron and separation procedure using a short column filled with Amberlite XAD-7 nonionic chelating resin is proposed for the spectrophotometric determination of traces of iron. The influence of several ions as interference was discussed. The separation of Fe(III) ion from the mix-ture solution were carried out with the buffer solution (pH 5.0) and 0.25M HCl as eluents.

• Analytical Science and Technology
• /
• v.5 no.1
• /
• pp.1-5
• /
• 1992

The adsorption amount of petroleum oil on XAD-4, XAD-7 and replacement adsorbents as rice bran, rice straw and sawdust were studied by using batch method measured in the optimum adsorption condition. The adsorption capacity of rice bran and rice straw of petroleum oil were excellent as well as adsorption ability about 50% of XAD resins and adsorption capacity of their replacement adsorbents were increased with optimum condition that pyrolysis time was 30 min. at $200^{\circ}C$. Adsorption ability of sawdust was very weak on the 30% MeOH aqueous medium but adsorption ability was range of about 50% of XAD resin's adsorption capacity on the 0.5M NaCl aqueous medium. Adsorption ability of rice bran and rice straw showed the same adsorption capacity even if difference external structure. Therefore, showing that rice bran and rice straw were have to good adsorption ability as replacement adsorbent for XAD resins.

• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.403-411
• /
• 1984

Amberlite XAD-7 and XAD-4 resins impregnated with DXHQ (5,7-dihalo-8-hydroxyquinoline) were prepared for the adsorption, separation and recovery of heavy metal ions from aqueous solutions. The characteristics of the impregnated resins, DXHQ (X : Cl, Br, I)-XAD were studied to find out the proper pairs of resin and DXHQ for the adsorption of metal ions. The increasing order of the impregnated amount of DXHQ onto XAD-7 resin was as follows: DCHQ < DBHQ < DIHQ. It was observed from the plot of log $K_d$ vs. pH that the optimum pH range for the adsorption of DIHQ onto XAD-4 resin was from 3.0 to 7.0. The stabilities of the DXHQ-XAD resins were investigated by measuring the amount of DXHQ remained on the XAD resin after shaking the DXHQ-XAD resins in various solutions of pH ranging from 2 to 12 and hydrochloric acid solutions. The impregnated resins were considerably stable in both acidic and neutral solutions. The amount of DIHQ leached from DIHQ-XAD-4 resin by eluting with various HCl solutions (1 ∼ 5M) was negligible, but in the case of XAD-7 resin it increases as the concentration of HCl solution increases. The optimum pH ranges, absorption mole ratio (M : DXHQ) and adsorption capacities (mmol metal per gram of resin) for the adsorption of metal ions onto the DXHQ-XAD resins were determined respectively. The stability of metal ion absorbed by the DXHQ-XAD resins was observed as the following order: M-DCHQ-XAD-7 < M-DBHQ-XAD-7 < M-DIHQ-XAD-7. The adsorbed metal ions were quantitatively recovered by eluting with HCl (0.5 ∼ 5M) and DXHQ-XAD resins could be reused over 5 times without re-impregnation of DXHQ.