• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.522-529
• /
• 1998

This experiment was conducted to study the effects of lactic acid bacteria (LAB) inoculation either alone or in combination with cell wall degrading enzymes on the fermentation characteristics and chemical compositions of Rhodesgrass silage. Over to 1 kg of fresh Rhodesgrass sample a treatment of inoculant LAB with or without addition of an enzyme of Acremoniumcellulase (A) or Meicelase (M) or a mixture of both enzymes (AM) was applied. The treatments were control untreated, LAB-treated (application rate $1.0{\times}10^5cfu/g$ fresh sample), LAB+A 0.005%, LAB+A 0.01%, LAB+A 0.02%, LAB+M 0.005%, LAB+M 0.01%, LAB+M 0.02 %, LAB+AM 0.005%, LAB+AM 0.01%, and LAB+AM 0.02%. The sample was ensiled into 2-L vinyl bottle silo, with 9 silages of each treatment were made. Three silages of each treatment were incubated at 20, 30 and $40^{\circ}C$ for 2-months of storage period. All silages were well preserved with their fermentation quality has low pH values (3.91-4.26) and high lactic acid concentrations (4.11-9.89 %DM). No differences were found in fermentation quality and chemical composition of the control untreated silage as compared to the LAB-treated silage. Combined treatment of LAB+cellulases improved the fermentation quality of silages measured in terms of lower (p < 0.01) pH values and higher (p < 0.05) lactic concentrations than those of LAB-treated silages. Increasing amount of cellulase addition resulted in decrease (p < 0.05) of pH value and increase (p < 0.05) of lactic acid concentration. LAB + cellulase treatments (all cellulase types) reduced (p < 0.01) NDF, ADF and in vitro dry matter digestibility of silages compared with the control untreated silages. The fermentation quality and the rate of cell wall reduction were higher (p < 0.01) in the silages treated with LAB + cellulase A than in the silages treated with either LAB+cellulase M or LAB + cellulase AM. Incubation temperature of $40^{\circ}C$ was likely to be more appropriate environment for stimulating the fermentation of Rhodesgrass silages than those of 20 and $30^{\circ}C$.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.6 no.1
• /
• pp.125-148
• /
• 2000

At here, we investigated the historical background, current stage, and concrete therapies of alternatives in cancer therapy. We obtained the conclusion below. 1. Alternative medicine(AM) is a unothodoxial medical physiology, medical practice or intervension that overcome the side effects, faults, limits of coventional medicine. 2. Recentely, as emerging New-age movement, collapse of Decarte's mecanical cosmology, and emphasis on patient rights, the interest of AM is increased, and foreign & domestic use rates of AM are risen. 3. After coventional medicine in cancer therapies that depends on operations, radiations, and chemotherapy is bounded, Alternatives in cancer therapy are rapidly developed, and the majority of users are often considered satisfactory. 4. Alternatives in cancer therapy are classified six boundaries; Diet and Nutrition, Mind-body Technique, Integrated System, Pharmacologic and Biologic treatments, Immuno Enhanced Therapy, Natural and herbal medicine. 5. Looking at contents of Alternatives in cancer therapy, we get to know most of them are similar to the treatment of oriental medicine in holistic method, therapy, philosophy. If we synthesize the alternative medicine's treatment mentioned above and investigate it with oriental medical viewpoint, that may help us approach the conquest of cancer and improve the rate of cure. 6. It is certain that foreign AM will be imported reversely, and we must prepare for rebuilding of Korean traditional AM systemically, investing for activity positively, making national policy for medical system.

• The Journal of Korean Medicine
• /
• v.39 no.1
• /
• pp.1-12
• /
• 2018

Objectives: Astragalus membranaceus has been reported to inhibit immune responses, but its effect on hair loss is not clear. In this study, the effect of A. membranaceus extract (AM) on hair regrowth in C57BL/6 mice with natural hair loss in the telogen phase was investigated. Methods: Mice with natural hair loss were topically treated with 1% AM on the dorsal skin for 2 weeks. Dorsal skin samples were stained with hematoxylin and eosin and probed with an anti-mouse CD8a IgG. The mRNA expression levels of tumor necrosis factor $(TNF)-{\alpha}$, interferon $(IFN)-{\gamma}$ and interleukin (IL)-4 were measured by reverse transcription polymerase chain reaction and quantitative real-time polymerase chain reaction. Results: AM treatment induced hair regrowth in hair loss mice, while control mice suffered continued hair loss. Tapering hair shafts and broken hair follicles were decreased as well as CD8+ T lymphocyte infiltration. In addition, the expressions of $TNF-{\alpha}$, $IFN-{\gamma}$ and IL-4 were reduced by AM treatment. Also, AM treatment significantly increased the KGF expressions in Hs68 fibroblast cells. Conclusion: These results suggest that topical application of A. membranaceus may be an alternative therapy for hair loss.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.45-52
• /
• 2020

Recently, design for additive manufacturing (DfAM) technology has become a prominent design methodology for exploiting 3D printing, which leads the Fourth Industrial Revolution. When manufactured by the 3D printing method, it is possible to produce several shapes compared to the conventional casting or cutting process. DfAM-as a newly-proposed design methodology-can be used to specially design products with various shapes to apply functional requirements. Topology optimization verifies load paths to determine the draft design, and a shape-optimized design with objective functions for weight reduction enables efficient lightweight product design. In this study, by using these two DfAM technologies, a lightweight and optimal design is constructed for a node part of a vehicle body with a space frame designed for a lightweight vehicle. DfAM methodologies for concept design and detailed design, and the associated results, are presented. Finally, the product was additively manufactured, a fatigue performance test was performed, and the design reliability was verified.

• Korean Journal of Acupuncture
• /
• v.23 no.1
• /
• pp.125-135
• /
• 2006

Obiectives : Otitis media is the disease which indicates every inflammatory situation in the middle ear. This includes the inflammation in the ear canal and mastoid sinus. In this study, the effect of Sa-Am acupuncture Bi-Jung-Geouk(脾正格) and Bojoong-ikgi-tang(補中益氣湯) for three children patients with otitis media were evaluated. Methods : After treatment with the Sa-Am acupuncture Bi-Jung-Geouk(脾正格) and Bojoong-ikgi-tang(補中益氣湯) for 3~6 weeks, we evaluated the effect by the figure of otoscope and complaints of patients. Results : In three cases, the pus in the figure declined dramatically and symptoms of patients got better after 3~6 weeks treatment. Conclusions : The Sa-Am acupuncture Bi-Jung-Geouk(脾正格) and Bojoong-ikgi-tang(補中益氣湯) for otitis media was effective. It will be attempted to the patients with it.

• Journal of Acupuncture Research
• /
• v.30 no.4
• /
• pp.1-14
• /
• 2013

Objectives : The purpose of this study is to investigate the effects of Sa-Am spleen-tonifying acupuncture on radial pulse in healthy human subjects. Methods : Forty healthy human subjects participated in this study, divided into acupuncture group and control group. Radial pulse was measured by 3 dimensional pulse imaging system(DMP-3000) before, right after, 30 minutes after and 60 minutes after acupuncture in the acupuncture group. The subjects in the control group didn't received acupuncture but took a rest and then the radial pulse was measured at the same time points as the acupuncture group. The parameters were analyzed by gender, measuring location, and measuring time point. However the time related parameters exceptionally were analyzed without distinction of measuring location. Results : 1. T, variance of period, T2/T, T4/T, (T-T4)/T, T4/(T-T4), and W significantly changed after acupuncture. 2. Pressure, amplitude of H1, amplitude of H2, Amplitude of H4 and pulse energy significantly changed after acupuncture. 3. Pulse area, systolic pulse area and diastolic pulse area significantly changed after acupuncture. 4. Elasticity, AIx and AIx/HR significantly changed after acupuncture. Conclusions : The effect of Sa-Am spleen-tonifying acupuncture in healthy human may be observed on time, amplitude, pulse area and augmentation index. Further studies on the effects of Sa-Am acupuncture using radial pulse are needed.

• Korean Journal of Materials Research
• /
• v.25 no.10
• /
• pp.547-551
• /
• 2015

The present study prepared molybdenum trioxide ($MoO_3$), the most important intermediate of molybdenum metal, by using a fluidized bed reactor for the thermal decomposition of ammonium molybdate (AM) in the presence of an air flow. During the process of fluidizing the sample inside the reactor, the reaction time and temperature were optimized with a close analysis of the X-ray diffraction (XRD) data and with thermogravimetric analysis (TGA). In particular, the temperature level, at which the AM decomposition is completed, is very important as a primary operating parameter. The analysis of the XRD and TGA data showed that the AM decomposition is almost completed at ${\sim}350^{\circ}C$ with a reaction time of 30 min. A shorter reaction time of 10 min. required a higher reaction temperature of ${\sim}500^{\circ}C$ with the same air flow rate to complete the AM decomposition. A sharp rise in the decomposition efficiency at a temperature ranging between 320 and $350^{\circ}C$ indicated a threshold for the AM decomposition. The operating conditions determined in this study can be used for future scale-ups of the process.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.346-356
• /
• 2011

BACKGROUND: Chemical fungicides not only may pollute the ecosystem but also can be environmentally hazardous, as the chemicals accumulate in soil. Biological control is a frequently-used environment-friendly alternative to chemical pesticides in phytopathogen management. However, the use of microbial products as fungicides has limitations. This study isolated and characterized a three-antifungal-enzyme (chitinase, cellulase, and ${\beta}$-1,3-glucanase)-producing bacterium, and examined the conditions required to optimize the production of the antifungal enzymes. METHOD AND RESULTS: The antifungal enzymes chitinase, cellulase, and ${\beta}$-1,3-glucanase were produced by bacteria isolated from an sawmill in Korea. Based on the 16S ribosomal DNA sequence analysis, the bacterial strain AM50 was identical to Streptomyces sp. And their antifungal activity was optimized when Streptomyces sp. AM50 was grown aerobically in a medium composed of 0.4% chitin, 0.4% starch, 0.2% ammonium sulfate, 0.11% $Na_2HPO_4$, 0.07% $KH_2PO_4$, 0.0001% $MgSO_4$, and 0.0001% $MnSO_4$ at $30^{\circ}C$. A culture broth of Streptomyces sp. AM50 showed antifungal activity towards the hyphae of plant pathogenic fungi, including hyphae swelling and lysis in P. capsici, factors that may contribute to its suppression of plant pathogenic fungi. CONCLUSION(S): This study demonstrated the multiantifungal enzyme production by Streptomyces sp. AM50 for the biological control of major plant pathogens. Further studies will investigate the synergistic effect, to the growth regulations by biogenic amines and antifungal enzyme gene promoter.

• Journal of Powder Materials
• /
• v.30 no.3
• /
• pp.203-209
• /
• 2023

Aluminum alloy-based additive manufacturing (AM) has emerged as a popular manufacturing process for the fabrication of complex parts in the automotive and aerospace industries. The addition of an inoculant to aluminum alloy powder has been demonstrated to effectively reduce cracking by promoting the formation of equiaxed grains. However, the optimization of the AM process parameters remains challenging owing to their variability. In this study, the response surface methodology (RSM) was used to predict the crack density of AM-processed Al alloy samples. RSM was performed by setting the process parameters and equiaxed grain ratio, which influence crack propagation, as independent variables and designating crack density as a response variable. The RSM-based quadratic polynomial models for crack-density prediction were found to be highly accurate. The relationship among the process parameters, crack density, and equiaxed grain fraction was also investigated using RSM. The findings of this study highlight the efficacy of RSM as a reliable approach for optimizing the properties of AM-processed parts with limited experimental data. These results can contribute to the development of robust AM processing strategies for the fabrication of high-quality Al alloy components for various applications.

• Journal of Chest Surgery
• /
• v.57 no.4
• /
• pp.342-350
• /
• 2024

Background: The maintenance of antiplatelet therapy increases the risk of bleeding during lung cancer surgery. Conversely, the perioperative interruption of antiplatelet therapy may result in serious thrombotic complications. This study aimed to investigate the safety of continuing antiplatelet therapy in the context of lung cancer surgery. Methods: We retrospectively reviewed a cohort of 498 elderly patients who underwent surgery for lung cancer. These patients were categorized into 2 groups: group N, which did not receive antiplatelet therapy, and group A, which did. Group A was subsequently subdivided into group Am, where antiplatelet therapy was maintained, and group Ai, where antiplatelet therapy was interrupted. We compared the incidence of bleeding-related and thrombotic complications across the 3 groups. Results: There were 387 patients in group N and 101 patients in group A (Ai: 70, Am: 31). No significant differences were found in intraoperative blood loss, thoracotomy conversion rates, transfusion requirements, volume of chest tube drainage, or reoperation rates for bleeding control between groups N and A or between groups Am and Ai. The duration of hospital stay was longer for group A compared to group N (7 days vs. 6 days, p=0.005), but there was no significant difference between groups Ai and Am. The incidence of cardiovascular or cerebrovascular complications did not differ significantly between groups Ai and Am. However, group Ai included a severe case of in-hospital ST-elevation myocardial infarction. Conclusion: The maintenance of antiplatelet therapy was found to be safe in terms of perioperative bleeding and thrombotic complications in elderly lung cancer surgery patients.