• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.23-29
• /
• 2017

The packaged optical fiber Bragg grating sensors which were networked by multiplexing the Bragg grating sensors with WDM technology were investigated in application for the structural health monitoring of the marine trestle structure transporting the ship. The optical fiber Bragg grating sensor was packaged in a cylindrical shape made of aluminum tubes. Furthermore, after the packaged optical fiber sensor was inserted in polymeric tube, the epoxy was filled inside the tube so that the sensor has resistance and durability against sea water. The packaged optical fiber sensor component was investigated under 0.2 MPa of hydraulic pressure and was found to be robust. The number and location of Bragg gratings attached at the trestle were determined where the trestle was subject to high displacement obtained by the finite element simulation. Strain of the part in the trestle being subjected to the maximum load was analyzed to be ${\sim}1000{\mu}{\varepsilon}$ and thus shift in Bragg wavelength of the sensor caused by the maximum load of the trestle was found to be ~1,200 pm. According to results of the finite element analysis, the Bragg wavelength spacings of the sensors were determined to have 3~5 nm without overlapping of grating wavelengths between sensors when the trestle was under loads and thus 50 of the grating sensors with each module consisting of 5 sensors could be networked within 150 nm optical window at 1550 nm wavelength of the Bragg wavelength interrogator. Shifts in Bragg wavelength of the 5 packaged optical fiber sensors attached at the mock trestle unit were well interrogated by the grating interrogator which used the optical fiber loop mirror, and the maximum strain rate was measured to be about $235.650{\mu}{\varepsilon}$. The modelling result of the sensor packaging and networking was in good agreements with experimental result each other.

• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.171-182
• /
• 2018

Papaya (Carica papaya L.) is one of the crops widely planted in tropical and subtropical areas. The papaya fruit has low calories and are plentiful in vitamins A and C and in minerals. A major problem in papaya production is a plant disease caused by the papaya ringspot virus (PRSV). The first PRSV-resistant GM papaya expressing a PRSV coat protein gene was developed by USA scientists in 1992. The first commercial GM papaya cultivars derived from the event was approved by the US government in 1997. Development of transgenic papayas has been focused on vaccine production and limited agricultural traits, including insect and pathogen resistance, long shelf life, and aluminum and herbicide tolerance. Approximately 17 countries, including the USA and China, produced transgenic papayas and/or commercialized them, which provoked studies on biosafety assessment and development of GM-detection technologies. For the biosafety assessment of potential effects on human health, effects of long-term feeding to model animals have been studied in terms of toxicity and allergenicity. Studies on environmental safety assessment include influence on soil-microbial biodiversity and transfer to soil bacteria of GM selection markers. Many countries, such as Korea, the European Union, and Japan, that have strict regulations for GM crops have serious concerns about unintended introduction of GM cultivars and food commodities using unauthorized GM crops. Transgene- and/or GM event-specific molecular markers and technologies for genomics-based detection of unauthorized GM papaya have been developed and have resulted in the robust detection of GM papayas.

• Korean Journal of Veterinary Research
• /
• v.46 no.3
• /
• pp.225-234
• /
• 2006

In the present study toxicity and immunostimulating activity of the lectin(KML-C), which was extracted from Korean mistletoe(Viscum album coloratum) were investigated in swine. To determine the toxicity, lectin was injected into thigh or cervical muscles of 4-week-old piglets(Landrace) and observed clinically and pathologically. For determination of the immnunostimulating activity, lectin($0.7{\mu}g/kg$ of body weight)-adjuvanted vaccine of Aujeszky's disease virus(ADV)(NYJ1-87) which was inactivated by 0.2% formalin was injected into the cervical muscle of antibody-negative piglets in the same age group. Subpopulation of the immune cells and serum neutralizing(SN) antibodies in the piglets were examined after vaccination, and resistance of the piglets against challenge by virulent NYJ1-87 was further examined. The results were also compared with those from piglets injected with aluminum hydroxide [$Al(OH)_3$]-adjuvanted vaccine of inactivated NYJ1-87 and NYJ1-87 vaccine without adjuvant, and the results are as follows. By injection of lectin with $30{\mu}g/kg$ of body weight to the thigh muscle, all of 12 piglets died after signs such as dyspnea, fever, systemic erythema and subcutaneous hemorrhages, and lesions pertaining to poisonous hepatitis and dysfunction of kidney were observed. By injection of lectin with $7{\mu}g/kg$ of body weight to the thigh muscle, all of 12 piglets showed signs such as edema and cutaneous hemorrhage in the injected area, lameness and depression, and lesions pertaining to poisonous hepatitis and dysfunction of kidney were observed. By injection of lectin with 1, 3 and $5{\mu}g/kg$ of body weight to the thigh muscle of each one piglet, signs such as congestion, induration and grayish coloration in the injected area, depression and inappetence were observed in all piglets. Toxic changes were also observed in the liver and kidney of piglets by lectin of 3 and $5{\mu}g$. By injection of lectin with 0.5 and $0.7{\mu}g/kg$ of body weight to the cervical muscle of each 9 piglets, all piglets were clinically normal and there were no significant changes in blood counts and chemistry values. Whereas, epithelial swelling and vacuolation of convoluted tubules were observed from one piglet injected with lectin of $0.7{\mu}g$, and necrosis and fibrosis of muscular fiber were observed in the muscle of one piglet injected with lectin of $0.5{\mu}g$. Only population of sIgM+ B lymphocytes increased among immune cells in all of 15 piglets immunized with lectin($0.7{\mu}g/kg$ of body weight)-adjuvanted vaccine, while compared to those in $Al(OH)_3$-adjuvanted vaccine and vaccine without adjuvant. No additional stimulation to the immune cells was recognized when lectin was added to $Al(OH)_3$-adjuvanted vaccine. In piglets immunized with lectin-adjuvanted vaccine, SN titers in reciprocal values for loge were 1.3-4.0 at 1-4 weeks after vaccination, which was similar to those with 1.0-3.3 by vaccine without adjuvant but lower than those with 2.0-5.7 by $Al(OH)_3$-adjuvanted vaccine. Also, no additional increase in the SN titers was recognized when lectin was added to $Al(OH)_3$-adjuvanted vaccine. Piglets immunized with lectin-adjuvanted vaccine were resistant to challenge by the virulent NYJ1-87 at 4 weeks after vaccination, and the SN titers reached to 5.0 one week after challenge, which was higher than those with 4.0 by vaccine without adjuvant but somewhat lower than those with 7.7 by $Al(OH)_3$-adjuvanted vaccine.

• The Korean Journal of Ecology
• /
• v.26 no.3
• /
• pp.143-150
• /
• 2003

Korea has plentiful precipitation but rainfall events concentrate on several months of rainy season in her weather condition. Korea, therefore, experiences drought for a given period every year. Moreover the soil has usually low water holding capacity, as it is composed coarse particles originated from the granite. Response of several oaks and the Korean red pine (Pinus densiflora) on water stress showed that water budget was significant factor determining vegetation distribution. In addition, dehydration level due to cold resistance mechanism of several evergreen plants during the winter season was closely related to their distribution in natural condition. Experimental result under water stress showed that the Korean red pine was very tolerant to desiccation but the seedlings showed high mortality during the dry season. The mortality tended to proportionate to soil moisture content of each site. A comparison between soil moisture content during June when it is severe dry season and moisture content of the culture soil when the pine seedlings reached the permanent wilting point due to water withheld proved that high mortality during the dry season was due to water deficit. Water potential of sample plants measured during the exposure experiment to the air pollutant showed a probability that water related factors would dominate the occurrence of visible damage and the tolerance level of sample plants. In both field survey and laboratory experiment, plants exposed to air pollution showed more rapid transpiration than those grown in the unpolluted condition. The result would due to injury of leaf surface by air pollutants. Aluminum (Al/sup 3+/) increased in the acid soil not only inhibits root growth but also leads to abnormal distribution of root system and thereby caused water stress. The water stresses due to air pollution and soil acidification showed a possibility that they play dominating roles in inducing forest decline additionally to the existing water deficit due to weather and soil conditions in Korea. Sludge, which can contribute to improve field capacity, as it is almost composed of organic matter, showed an effect ameliorating the retarded growth of plant in the acidified soil. The effect was not less than that of dolomite known in widely as such a soil ameliorator. Litter extract contributed also to mitigate the water stress due to toxic Al/sup 3+/. We prepared a model showing the potential interaction of multiple stresses, which can cause forest decline in Korea by synthesizing those results. Furthermore, we suggested restoration plans, which can mitigate such forest decline in terms of soil amelioration and vegetation restoration.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.63-73
• /
• 2009

Recently, the use of lightweight panels in building structures has been increasing. Of the various lightweight panel types, styrofoam sandwich panels are inexpensive and are excellent in terms of their insulation capacity and their constructability. However, sandwich panels that include organic material are quite vulnerable to fire, and thus can numerous casualties in the event of a fire due to the lack of time to vacate and their emission of poisonous gas. On the other hand, lightweight foamed concrete is excellent, both in terms of its insulation ability and its fire resistance, due to its Inner pores. The properties of lightweight concrete is influenced by foaming agent type. Accordingly, this study investigates the insulation properties by foaming agent type, to evaluate the possibility of using light-weight foamed concrete instead of styrene foam. Our research found thatnon-heating zone temperature of lightweight foamed concrete using AP (Aluminum Powder) and FP (animal protein foaming agent) are lower than that of light-weight foamed concrete using AES (alkyl ether lactic acid ester). Lightweight foamed concrete using AES and FP satisfied fire performance requirements of two hours at a foam ratio 50, 100. Lightweight foamed concrete using AP satisfied fire performance requirements of two hours at AP ratio 0.1, 0.15. The insulation properties were better in closed pore foamed concrete by made AP, FP than with open pore foamed concrete made using AES.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.119-127
• /
• 2002

This study was conducted to develop the heat exchanger by utilizing the heat energy of underground water(15℃), which might be used for cooling and heating system of the agricultural facilities. We developed the heat exchanger, parallel type plat fin tube made of Aluminum(Al 6063), which was named Aloo-Heat(No. of The registration design : 0247164, by Korean Intellectual property Office). The fin of exchanger was design of the granulated surface for minimizing fouling factor and dew forms, and also placed parallel to the tube in order to minimized the resistance of flows. 1. Aloo-heat was designed to have 0.03m for inside diameter, 0.036m for outside diameter of tube, 0.0012m for thickness of fin and 0.032m for length of plat fin. 2. t was also designed to have 1.5248m²/m for outside area of heat transfer, 0.0942m²/m for inside area contacting hot liquid, and the ratio (Ra) was 16.1869. 3. Efficiency of the fin was 93 percentage when fin length was 0.032m, and the fin thickness satisfied equation $\frac{h{\rho}}{k}$< 0.2 when it was 0.0012m. 4. According to the performance test of Aloo-heat, as the temperature and rate increased, the heating value also increased, heating value was 504kJ/h·m and 6,048kJ/h·m when it was 60℃, 10 𝑙/min and 80℃, 40 𝑙/min respectively. 5. The test of heating value was confident, because correlation value(R²) was 0.9898 for the temperature and 0.9721 for flow rate of hot liquid, respectively.