• 제목/요약/키워드: Aluminum powders

검색결과 189건 처리시간 0.023초

다입자유한요소법을 이용한 Al분말 압축공정에서 입자의 거동과 변형에 관한 연구 (Particle Behavior and Deformation During Compaction of Al Powder Using MPFEM)

  • 이경훈;이정민;김병민
    • 대한기계학회논문집A
    • /
    • 제34권4호
    • /
    • pp.383-390
    • /
    • 2010
  • 본 논문에서는 알루미늄 분말의 치밀화 거동을 분석하기 위하여 다입자유한요소모델을 이용한 분말압축 해석방법을 제시하였다. 다입자유한요소모델을 이용하여 압축공정 동안 압축속도와 입자크기가 입자의 변형거동과 분말의 치밀화에 미치는 영향을 조사하였다. 유한요소해석결과는 평균입도 20, $3{\mu}m$의 알루미늄 분말에 대한 일축압축시험을 통해 검증되었다. 압축시험은 만능재료시험기(MTS)를 이용하였으며 해석과 동일하게 5와 15, 30, 60mm/min 압축속도에 대해 수행되었다. 입자직경이 감소할수록 입자간 마찰이 증가하기 때문에 압출하중은 증가하였다. 압축속도가 감소할수록 증가된 입자의 회전모멘트는 입자간의 이동과 분말의 치밀화에 기여하여 최종 분말의 상대밀도를 증가시킨다.

유기용매의 사용없이 알콕사이드로부터 코디어라이트 분말제조 (Cordierite Powder Preparation from Alkoxides without Using Organic Solvents)

  • 류수착;김호룡;김겸;박희찬
    • 한국세라믹학회지
    • /
    • 제31권3호
    • /
    • pp.291-297
    • /
    • 1994
  • Cordierite powders were prepared by controlled hydrolysis of metal alkoxides with catalysts in water medium without using organic solvents. Water was adjusted to a certain pH by HC1 and NH4OH. $\alpha$-Cordierite powder was prepared from aluminum isopropoxide, tetraethyl orthosilicate and magnesium ethoxide mixed with water adjusted to pH of 3. At water pH of 11, $\alpha$-cordierite, mullite and $\beta$-quartz phases were coexisted. The powders were freeze dried, calcined and then fired at different temperatures. The characteristics of powders were examined by means of DTA, X-ray diffraction, FT-IR, and electron microscopy. It was found that $\alpha$-cordierite could be synthesized at temperature of 120$0^{\circ}C$ from the powders prepared by alkoxides with water medium without organic solvents.

  • PDF

MgO-Al2O3-SiO2계 요업원료의 제조 및 소결특성 -에멀젼법에 의한 Mullite분체의 저온합성- (Low-Temperatrue Synthesis of Mullite Powders by the Emulsion Technique)

  • 현상훈;이희수;송승룡
    • 한국세라믹학회지
    • /
    • 제26권3호
    • /
    • pp.361-370
    • /
    • 1989
  • Mullite powders were synthesized from the common solution of aluminum sulfate and sodium silicate solutions by the emulsion-hot kerosene technique. The reaction temperature and mechanism for mullitization and the characteristics of synthesized mullite powders were investigated. The effect of Na components introduced from sodium silicate solution on the physical property and microstructure of sintered mullite was also examined. It was proved that mullites were formed at 75$0^{\circ}C$ through the reaction mechanism of Na2O.2.2SiO2+3.3Al2(SO4)3longrightarrow1.1(3Al2O3.2SiO2)+Na2SO4+8.9SO3. Synthetic mullite powders consisted of the compositiion of 3Al2O3.2SiO2 and showed highly agglomeration of hollow spherical particles of 1${\mu}{\textrm}{m}$ diameter. The density and fracture toughness of sintered mullites were somewhat reduced because of the effect of a very small amount of residual Na components.

  • PDF

Fabrication of $Ti(Al,\;O)-Al_2O_3$ Powder Feedstock for Thermal Spraying and Evaluation of the Composite Coating

  • Cao, Peng;Gabbitas, Brian;Zheng, Ling;Zhang, Deliang
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.49-50
    • /
    • 2006
  • [ $Ti(Al,\;O)-Al_2O_3$ ] composite powders were produced by high energy mechanical milling of a mixture of Al and $TiO_2$ powders followed by a combustion reaction. The powders were subsequently thermally sprayed on H13 steel substrates. Microstructural examination was conducted on the composite powders and thermally sprayed coatings, using X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The performance of the coatings was evaluated in terms of micro-hardness and thermal fatigue. The thermally sprayed coatings performed very well in the preliminary thermal fatigue tests and showed no wetting tendency to molten aluminum.

  • PDF

플라즈마분체 오버레이법에 의한 알루미늄합금 표면의 경화특성에 관한 연구( II ) -후막 표면 합금화층의 경화특성과 내마모성- (Hardening Characteristics of Aluminum Alloy Surface by PTA Overlaying with Metal Powders (II) -Hardening charactersteristics and wear resistance of thicker surface alloyed layer-)

  • 이규천;;강원석;이영호
    • Journal of Welding and Joining
    • /
    • 제12권4호
    • /
    • pp.102-109
    • /
    • 1994
  • The thick and hard alloyed layer was formed on the surface of Aluminum Cast Alloy(AC2B) by PTA overlaying process with Cr, Cu and Ni metal powders under the condition of overlaying current 150A, overlaying speed 150mm/min and different powder feeding rate 5-20g/min. The characteristics of hardening and were resistance of alloyed layer have been investigated in relation to microstructure of alloyed layer. As a result, it was made clear that Cu powder was the most superier one in three metal powders used due to an uniform hardness distribution of Hv 250-350, good wear resistance and freedom from cracking in alloyed layer of which microstructure consisted of hypereutectic. On the contrary, irregular hardness distribution was usually obtained in Cr or Ni alloyed layers of which hardness was increased as Cr or Ni contents and reached to maximum hardness of about Hv 400-850 at about 60wt% Cr or 40wt% Ni in alloyed layer. However the cracking occurred in these alloyed layers with higher hardness than Hv 250-300 at more than 20-25wt% of Cr or Ni contents in alloyed layer. Wear rate of alloyed layer was decreased to 1/10 in Cu alloyed layer and 1/5 or 1/3 in Cr or Ni alloyed layer with same hardness of about Hv 300 in comparison with that of base metal at higher sliding speed.

  • PDF

알루미늄 분진의 평균입경 변화에 따른 폭발위험성 (Explosion Hazards of Aluminum Powders with the Variation of Mean Diameter)

  • 한우섭;한인수
    • 한국가스학회지
    • /
    • 제18권4호
    • /
    • pp.21-26
    • /
    • 2014
  • 본 연구에서는 알루미늄 분말의 입자 크기에 따른 폭발특성을 20 L 분진폭발실험장치(K$\ddot{u}$hner제작)를 사용하여 조사하였다. 사용한 시료는 각각 16, 33, $88{\mu}m$의 체적기준 평균입경을 갖는 알루미늄 입자를 대상으로 실험을 수행하였다. 분진의 평균입경이 16, 33, $88{\mu}m$에서 폭발하한농도는 각각 40, 60, $125g/m^3$로서 분진의 입경이 증가하면 점차적으로 증가하는 경향을 나타냈다. 또한 각각의 알루미늄 분진에서 입자 크기의 증가는 폭발압력 및 분진폭발지수($K_{st}$)의 감소로 이어졌다. 이러한 본 연구 결과는 알루미늄 분말의 활용 및 안전 운전을 위한 중요 자료로 활용될 수 있다.

$Al_2O_3$로 피복시킨 세라믹 복합분체의 제조 및 특성 : (I) 피복용 혼합 알루미늄 염 용액의 가수분해 (Preparation and Characteristics of Ceramic Composite Powders Coated with $Al_2O_3$: (I) Hydrolysis of Mixed Aluminum Salt Solution for Coating)

  • 현상훈;정형구
    • 한국세라믹학회지
    • /
    • 제27권7호
    • /
    • pp.851-860
    • /
    • 1990
  • The hydrolysis-precipitation reaction of mixed aluminum salt solutions of aluminum sulfate, aluminum nitrate, and urea has been investigated to obtain narrow-sized and unagglomerated fine spherical precipitates of aluminum hydroxide required for coating core particles. The hydrolysis-precipitatin reaction could be controlled to be appropriate to coating processes by usign urea as a pH control-agent. As the concetration of total Al3+ ion and the molar ratio of SO42-/Al3+ in starting solutions became smaller and also as the vol. ratio of water/solution for hydrolyzing mixed aluminum salt solution became larger, the morphology of precipitates tended to be more unagglomerated and spherical, while their size(0.5longrightarrow0.05${\mu}{\textrm}{m}$) to be smaller. The optimum hydrolysis condition for coating processes was to hydrolyze the mixed aluminum salt solution, in which the molar ratio of SO42-/Al3+ was 0.75, while the amount of water corresponding to the vol. ratio of water/solution of 15. The precipitate was the aluminum hydroxide which sulfate ions were strongly adsorbed on and the maximum yield in the hydrolysis-precipitation reaction was about 20%.

  • PDF

제산제의 중화 능력의 평가 연구 (Evaluation of Neutralizing Capacities of Antacid Products)

  • 박경호;차수만;최진석;김낙두
    • 약학회지
    • /
    • 제27권2호
    • /
    • pp.139-148
    • /
    • 1983
  • The neutralizing capacities of the antacids, which are frequently used in Korean market, were evaluated in vitro by the methods of Resset and Rice, Fordtran and Collyns, and modified Beekman, respectively. The antacids used in the study are two kinds, the one is preparations from Seoul National University Hospital and the other is products from pharmaceutical companies, and their components are aluminum phosphate, aluminum hydroxide, magnesium aluminum hydroxide, magnesium hydroxide, basic aluminum sucrose sulfate and $2MgO{\times}Al_{2}O_{3}{\times}SiO_{3}$, etc. The hospital preparations, DMC and MAC powders, showed most powerful and sustained neutralizing capacities, i.e. they maintained the pH range from 5 to 8 for 60min, Whereas pharmaceutical products, aluminum hydroxide gel containing magnesium hydroxide and magnesium aluminum hydroxide gel exhibited a moderate capacities, i.e pH ranged from 3 to 6, and aluminum phosphate, $2MgO{\times}Al_{2}O_{3}{\times}SiO_{2}$ and basic aluminum sucrose sulfate displayed a weak activity, pH ranged from 2 to 3. When the therapeutic doses of aluminum hydroxide gel containing magnesium hydroxide and magnesium aluminum hydroxide gel were divided into 2 doses and each dose was used at the interval of 30min., the divided doses kept more prolonged higher pH than the single therapeutic dose. Milliequivalents of neutralizing capacities of each antacid were measured by the method of Fordtran and Collyns. The milliequivalents per 1ml of aluminum hydroxide gel, aluminum hydroxide gel containing magnesium hydroxide, magnesium aluminum hydroxide gel and aluminum phosphate were 2.87, 2.86, 2.57, and 0.67, respectively. The milliequivalents per 100mg of preparations, i.e. MAC powder, dried aluminum hydroxidgel, DMC powder, 2MgO, $Al_{2}O_{3}$. $SiO_{2}$, magnesium aluminum hydroxide and basic aluminum sucrose sulfate were 1.91, 1.68 1.63, 1.45, 1.44, and 0.44, respectively.

  • PDF

Bauxite로부터 습식산처리법에 의한 알루미나 분체의 제조 및 그 이용에 관한 연구(II) : 납석-Aluminum Hydrate Gel 혼합물의 Mullite화 거동 (A Study on the Preparation of Alumina Powders from Bauxite by Wet Acid Process and Their Utilization (II) : Mullitization of Pyrophyllite-Aluminum Hydrate Gel Mixture)

  • 이승현;조철구;배원태
    • 한국세라믹학회지
    • /
    • 제27권8호
    • /
    • pp.1011-1019
    • /
    • 1990
  • Pyrophyllite, which has low impurities, was used in the synthesis of mullite to decrease the glass phase, which can be formed from impurities such as alkali and alkali earth elemetns present in raw materials. But, as pyrophyllite has less alumina content than other aluminosilicate materials such as kaolin, more alumina sources were needed in the synthesis of mullite. In other to investigate the effect of particle size of alumina sources on the mullitization of pyrophyllite, aluminum hydrate gel and activated alumina were used. When activated alumina, which has large particle size, was added to pyrophyllite, mullitization was not fully accomplished regardless of temprature. In the case of aluminum hydrate gel, which has small particle size, the maximum yield of mullite was about 90.3% at 1700$^{\circ}C$, and grain size of mullite was larter than the case of activated alumina was added.

  • PDF