• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.53-63
• /
• 2022

Recently, the use of aluminum components in the reduction of the vehicle weight to improve fuel efficiency and reduce carbon dioxide emissions has increased. In the aluminum machining cutting process, hole-making is an important process that accounts for 30% of the machining process. Although many studies have been conducted using the continuously advancing hole processing technology, studies on the machinability of the tool depending on the type of chuck on the workpiece are still lacking. In this study, the machining performance of cemented carbide burnishing drills was compared and analyzed according to chuck type. The burnishing drill was used to create a hole in the AL6061 workpiece, and the surface roughness and dimensional accuracy of the hole were examined according to the type of chuck while monitoring the spindle load.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.122-130
• /
• 1996

In this study, machinability of some aluminum-magnesium alloy are experimentally investigated using polycrystalline diamond tool with turning, and evaluated some independent cutting variables affected micrometal cutting characteristics as cutting force, specific cutting resistance, shear angles. To know the effect of cutting parameters of single point diamond machining, experiments were performed to measure cutting forces for high speed turning of aluminum alloy 6061-T6, SM45C and FC20 with poly- crystalline diamond and coated cemented carbide tool. Independent cutting variables were changed to a variety of cutting speed, feed rate, rake angles, material properties of workpiece and tool. Futhermore. Some useful informations are obtained in this study can guide micro metal cutting of aluminum alloy with diamond tool.

• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.911-916
• /
• 1998

By using {{{{ { { {Y }_{3 }Al }_{5 }O }_{12 } }} (YAG) and SiO2 as sintering additives the effect of the composition of sintering ad-ditives on microstructure and mechanical properties of the hog-pressed and subsequently annealed SiC ma-terials were investigated. Microstructures of sintered and annealed materials were strongly dependent onthe composition of sintering additives. The average diameter and volume fraction of elongated grains in an-nealed materials increased with the SiO2/YAg ratio while the fracture toughness increased with the SiO2/YAg ratio. The average MPa.{{{{ { m}^{1/2 } }} respectively. Typical strength and fracture toughness of an annealed material with SiO2/YAg ra-tionof 0.67 were 371 MPa and 5.6 MPa.{{{{ { m}^{1/2 } }} respectively.

• Journal of Welding and Joining
• /
• 제15권2호
• /
• pp.43-53
• /
• 1997

The complete joining method for dissimilar press punch materials and its real-time evaluation method is not available at present. Brazing method has been used for joining them, but it is known that the welded joint by the brazing has the lower bonding efficiency and reliability than the diffusion welding. The friction welding with a diffusion mechanism in bonding was applied in this study. This work was carried out to determine the proper friction welding conditions and to analyze mechanical properties of friction welded joints of sintered carbide tool materials (SKNM50 for the blade part of press punch) to alloy steel (SCM440 for the shank part of press punch) using aluminum (A6061 for the interlayer material) as an insert material between the sintered carbide tool materials and the alloy steel. In addition, acoustic emission test was carried out during friction welding to evaluate the weld quality.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.36-46
• /
• 1996

This paper deals with determinig the proper friction welding condition and analyzing various mechanical properties of friction welded joints of sintered carbide tool materials(K20, P25, and SKDX5 for the blade part of drill or press punch) to alloy steel (SKH4, SCM440 for the shank part of drill or press punch), the alloy steel to aluminum(A6061 for the interlayer material between the blade part and the shank) and sintered carbide tool materials to alumminum. And also acoustic emission test will be carried out during fiction welding to evaluate the weld quality.

• 대한치과보철학회지
• /
• 제37권1호
• /
• pp.42-50
• /
• 1999

This study investigated the effects of surface treatment for filling resins on the surface texture of denture resin teeth by the use of scanning electron microscope. This study also evaluated the bond strength of filling resins to denture resin teeth. The denture resin teeth in this study was Endura Posterio(Shofu Co., Japan). The ailing resins used were Coe-cure(Coe Co., USA), Vertex RS (Dentimax Ziest, Holland), and light cured resin Z-100(3M Co., USA). The test sample were divided into 3 parts. Group 1 : Sandblasted with $50{\mu}m$ Aluminum oxide. Group 2 : Treated with #60 silicone carbide paper Group 3 : Treated with monomer brush application. Control Group : No Treatment. The results were as follows ; 1. The bond strength of filling resins to denture resin teeth is increased by surface treatment. 2. Regardless of the filling resins, there was a significant difference with # 60 silicone carbide paper treated group. 3. Regardless of each group, the bond strength according to the filling resins were decreased in the following order: Vertex RS, Coe-cure and Z-100.

• 한국세라믹학회지
• /
• 제36권8호
• /
• pp.799-804
• /
• 1999

Composites of SiC-Si3N4 consisted of uniformly distributed elongated $\beta$-Si3N4 grains and equiaxed $\beta$-SiC grains were fabricated with $\beta$-SiC,. $\alpha$-Si3N4 Al2O3 and Y2O3 powders. By hot-pressing and subsequent annelaing elongated $\beta$-Si3N4 grains were grown via$\alpha$longrightarrow$\beta$ phase transformation and equiaxed $\beta$-Si3N4 composites increased with increasing the Si3N4 content owing to the reduced defect size and enhanced crack deflection by elongated $\beta$-Si3N4 grains and the grain boundary strengthening by nitrogen incorporation. Typical flexural strength and fracture toughness of SiC-40 wt% Si3N4 composites were 783 MPa and 4.2 MPa.m1/2 respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.346-347
• /
• 2007

Aluminum nitride (AlN) thin films were deposited on Polycrystalline (poly) 3C-SiC buffer layers using pulsed reactive magnetron sputtering. Characteristics of AlN films were investigated experimentally by means of FE-SEM, X-ray diffraction, and FT-IR, respectively. As a result, highly (002) oriented AlN thin films with almost free residual stress were achieved using 3C-SiC buffer layers. Therefore, AlN thin films grown on 3C-SiC buffer layers can be used for various piezoelectric fields and M/NEMS applications.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.324-331
• /
• 1998

2, 5, 10 mol% YAG(yttrium aluminum garnet) 분말을 액상 소결조제로 $\alpha$상 탄화규소 분말에 첨가한 후 $1850^{\circ}C$에서 소결시간을 달리하여 소결체를 제조한 다음, 소결시 일어나는 미세구조 변화를 첨가된 액상량과 소결시간의 변화에 대하여 고찰하였다. 각 조성중 2시간 소결한 시편에서 가장 높은 밀도를 나타냈으며, 소결시간이 길수록 액상의 기화로 인하여 중량감소량이 점차 증가하였다. 또한 첨가된 YAG 액상량이 증가할 수록 상대밀도(apparent density)와 중량감소량은 증가하였으나 입성장속도는 감소하였다. 액상량이 적은 시편에서는 소결시간이 길수록 일부 6H상의 탄화규소 입자가 4H상 탄화규소 입자로 상전이 되었으며, 이로 인하여 막대상 입자들이 일부 존재하였다.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.604-609
• /
• 2020

본 연구에서는 RF 스퍼터를 이용하여 SiC 기판위에 AlN막을 증착하고 급속 열처리 (RTA) 공정의 온도에 따른 AlN/4H-SiC 구조의 전기적, 재료적 특성에 대한 영향을 분석하였다. 400도에서 RTA 공정을 진행한 Ni/AlN/4H-SiC SBD 소자의 온/오프 비율은 RTA 공정 전 그리고 600도에서 RTA 공정을 한 소자에 비해 약 10배정도 높은 값을 가졌다. 또한 오제이 전자현미경을 통한 원자성분 분석을 통해 증착한 AlN 층내의 존재하는 산소의 양이 후열 처리 조건에 따라 변화함을 확인하였고 소자의 온/오프 비율 그리고 온-저항 등 소자의 성능에 영향을 주는 것을 분석하였다. 추가적으로, 제작한 소자의 노출된 음향 주파수에 따른 전기적 특성변화를 분석하였다.