• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.461-470
• /
• 2002

The present paper investigates the effect of hot isostatic pressing (HIPing) on mechanical properties, e.g., tensile strength, ductility and impact absorption energy of sand and die casted aluminum alloys. After HIPing at various temperatures and pressure conditions, uniaxial tensile test and Izod impact test of the samples were carried out. The experimental results showed improvements in uniaxial tensile strength, elongation and Izod impact toughness of sand casted aluminum alloy, while deterioration of a tensile strength fur die casted aluminum alloy. The effect of HIPing for microstructure of the cast aluminum alloy was also investigated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.188-191
• /
• 2005

Lower arm for automobile has been made in steel traditionally. Nowadays steel is being substituted fur aluminum to reduce weight of automobile. Widely applied production method of aluminum component has been casting processes or cast/forging processes. But casting or cast/forging processes have limits of application to parts which is required high strength durability like automotive component. In this research, hot forging process has been adopted to produce aluminum lower arm to ensure required mechanical properties. To reduce production cost, 2 pieces with 1 blow process was developed. Optimization and verification of hot forging process for aluminum lower arm was performed by computer aided engineering using finite volume methods.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.62-67
• /
• 1998

An experimental study has been carried out to investigate casting process parameters which influence on the microstructures of cast preforms in casting/forging process of aluminum alloy. In the casting process, pouring temperature, pouring time, mold temperature, mold material, and, cooling method are selected as process parameters. With the cast preform, a forging test has been performed to compare mechanical properties of final products between casting/forging process and forging process. From the experimental results, low mold temperature and water cooling method are favorable for obtaining minute microstructures of cast preforms. Casting defects included in cast preforms. such as pores and shrinkage cavity, are eliminated by the forging process. And comparing cast/forged products with conventionally forged products, the former are almost as same as the latter in mechanical characteristics.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.14-21
• /
• 2003

This study deals with the influence of ceramic coating on characteristics of friction and abrasion of aluminum allot(7075 T6) used in mechanical casting. In this research, frictional wear characteristic of ceramic coating materials such as $A1_2O_3$, $Si_3N_4$, SiC was investigated using aluminum alloy(7075 T6) and stainless 403 cast iron under room temperature and normal air pressure. The coating layer was observed using SEM. The conclusions are as follows: 1) Friction coefficients of $A1_2O_3$, SiC and $Si_3N_4$ are obtained 0.63 0.56 and 0.54 respectively. 2) Abrasion resistance of stainless 403 cast iron with $Si_3N_4$ is the best among the ceramic coating materials. 3) Abrasion mechanism of aluminum alloy(7075 T6) coaled with ceramic material and stainless 403 cast iron is caused by brittle fracture. 4) Coating the ceramic material on the aluminum alloy(7075 T6) can effectively increase the antiwear, impact properties, and corrosion resistance.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.493-498
• /
• 2002

Friction stir welding (FSW) is a relatively new solid-state joining process which can homogenize the heterogeneous microstructure by intensely plastic deformation arising from the rotation of the welding tool. The present study applied the FSW to an A356 aluminum (AI) alloy with the as-cast heterogeneous microstructure in the T6 temper condition, and examined an effect of microstructure on mechanical properties in the weld. The base material consisted of Al matrix with a high density of strengthening precipitates, large eutectic silicon and a lot of porosities. The FSW led to fragment of the eutectic silicon, extinction of the porosities and dissolution of the strengthening precipitates in the Al alloy. The dissolution of strengthening precipitates reduced the hardness of the weld around the weld center and the transverse ultimate tensile strength of the weld. Longitudinal tensile specimen containing only the stir zone showed the roughly same strength as the base material and a much larger elongation. Moreover, Charpy impact tests indicated that the stir zone had remarkably the higher absorbed energy than the base material. The higher mechanical properties of the stir zone were attributed to a homogenization of the as-cast heterogeneous microstructure by FSW.

• 한국주조공학회지
• /
• 제41권6호
• /
• pp.535-542
• /
• 2021

본 연구에서는 주철-알루미늄 이종재료의 계면결합강도를 향상시키기 위하여 탈흑연 열처리를 통해 주철 표면에서 일정 깊이까지의 흑연을 제거하였다. 열처리 시간이 증가함에 따라 흑연이 제거되는 깊이는 증가하였으며, 열처리 시간과 깊이 사이에 선형 관계가 나타났다. 일정 깊이의 흑연이 제거된 주철에 알루미늄을 다이캐스팅 공법으로 주조접합하여 주철에서 흑연이 제거된 공간을 알루미늄으로 채운 후, 계면 반응 및 알루미늄 침투 깊이를 조사하고 계면접합강도를 평가하였다. 다이캐스팅 공법을 통한 알루미늄은 탈흑연 열처리된 주철 표면에서 일정한 깊이까지 채워지는 것으로 확인되었으며, 주철-알루미늄 계면에 금속간화합물이 생성되지는 않은 것으로 확인되었다. 계면접합강도는 열처리 시간과는 큰 관계없이 90MPa 수준의 접합강도를 나타내었으며 이는 탈흑연 열처리를 하지 않은 소재의 접합강도 12MPa에 비해 매우 높은 강도이며, 주철의 탈흑연 영역에서 고압 다이캐스팅 공정에 의해 침투된 알루미늄 용탕이 응고되면서 언더컷 구조의 기계적 결합에 의한 것으로 생각된다.

• 한국주조공학회지
• /
• 제29권5호
• /
• pp.204-212
• /
• 2009

The effects of addition of magnesium only and the simultaneous addition of magnesium and aluminum on the graphite morphology of the cast iron with the composition of 3.6wt.% and 2.5wt.%Si poured into shell stack mold were investigated. The nodularity and mechanical properties of the specimen with smaller cross-section were higher than those with langer one, when copper was not added. When the magnesium only was added, the nodularity was decreased with decreased residual magnesium content and the C. V, graphite was obtained with the magnesium content in the range of 0.010~0.015wt.%. When the magnesium and aluminum were added together, the nodularity was decreased with decreased residual magnesium and increased aluminum contents. When copper was added, the volume fraction of pearlite in the matrix, strength and hardness were higher and elongation was lower for specimen with smaller cross-section. The volume fraction of pearlite, strength and hardness were increased and the elongation was decreased with increased copper content for the specimen with C, V, graphite.

• 한국산학기술학회논문지
• /
• 제20권7호
• /
• pp.347-352
• /
• 2019

본 연구는 소형 유도전동기 회전자를 생산공장에서 금형주조(die casting)로 제작 시 발생하는 cast 부 품질문제를 개선하기 위하여 수행되었다. 1차 연구결과와 현장 적용성을 고려한 수많은 parametric study를 통하여 새로운 rotor core cast model을 제안하였으며, 그 제안된 model에 대한 유효성을 평가, 검증하기 위하여 주조해석 전용프로그램을 사용한 수치해석과 실제품에 대한 현장실험을 통하여 다음과 같은 결론을 얻었다. 첫째, 유도전동기 회전자의 새로운 cast model에 대한 충진해석을 수행한 결과 용탕은 하부 end ring 부를 먼저 충진하고 이동하여 상부 end ring, core slot 부분을 충진하고 최종적으로 core slot 부분에서 충진이 완료된다. 둘째, 새롭게 제안된 rotor core cast model에 대한 용탕의 유동 양상을 보면 하부 end ring 부에 용탕의 유동에 의한 와류가 적게 발생하였으며, 현장실험 결과 하부 end ring 부 단면에서 소량의 작은 결함만이 발견되었다. 셋째, 유도전동기 회전자 제작 시 rotor core cast 형상 변경을 통하여 end ring 부 결함 발생 면적이 약 70 % 감소한 양호한 품질의 회전자를 생산할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.113-116
• /
• 1995

In this experimental study,aluminum hotforging was conduct to get superior pistion to cast piston. Cast structure of billet is destroyed, harmful defects is removed by forging process. We proposed the direction od die design by observing formability of product according to die shape. The microstructure of forged products with different preform was investigated to determine inital billet shape. We proposed appropriate heat treatment condition for improvement of mechanical properties.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.41-47
• /
• 1999

The scale of dendritic structure of a cast preform plays a key role in determining the mechanical properties of cast/forged products. In this study, casting experiments are carried out to reduce dendrite arm spacing (DAS) to smaller than 20 ${\mu}$m by increasing cooling rate of the mold and then to spheriodize dendritic structures by addition of alloying elements such as Zr and Ti-B. From the casting experiments, appropriate casting conditions for producing the cast preform of a motorcycle connecting rod are obtained. To obtain fine microstructures of the cast preform, mold temperature must set to be low whilst cooling rate being high. When cooling rate is 10 $^{\circ}C$/s, the size of DAS is 17.4 ${\mu}$m. And the degree of spheriodization of a grain in the cast preform is described by aspect ratio, which is defined as the ratio of major and minor radii of an elliptical grain. When 0.5% Zr and 0.24 % Ti+B are added to the molten aluminum alloy, the best aspect-ratio 0.75 is obtained. After forging the cast preform of a motorcycle connecting rod, the microstructure and mechanical properties of the cast preform are compared with those of the cast/forged product. Cast/forged products are superior in microstructure and in mechanical properties such as ultimate strength, elongation, and hardness.