• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.86.2-86
• /
• 2003

• 분석과학
• /
• 제6권2호
• /
• pp.225-229
• /
• 1993

알루미나 강화 지르코니아(10-30ATZ) 제조에 있어 지르코니아(TZ-2Y or TZ-0Y)와 알루미나(AKP-30) 분말 slurry에 2wt% 알루미나에 해당하는 알루미나졸을 첨가한 후 겔화시킴으로써 분말이 고르게 분산되어 있고, 동시에 알루미나겔이 분말의 표면을 코팅함으로써 응집이 일어나는 것을 막았다. 이렇게 제조된 ATZ는 $1450{\sim}1550^{\circ}C$ 이상에서 2시간 소결로 알루미나 grain이 $0.5{\mu}m$ 이하로 잘 분포되어 있는 좋은 미세구조와 이론 밀도의 99% 이상의 소결밀도를 보여 주었다. 또한 20ATZ 부근에서의 $K_{IC}$값은 ${\sim}8MPa{\cdot}m^{1/2}$으로 볼-밀링으로 얻는 $6MPa{\cdot}m^{1/2}$보다 높은 값을 보여주고 있다.

• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.849-854
• /
• 1996

boehmite which is the by-product in alcohol process contains anions such as $Cl^-,{NO_3}^-.or\; CH_3COO^-$ Influe-nce of these anions was studied on properties of $\alpha$-alumina powders prepared by treating the transformed ${\gamma}$-alumina with the alumina sol and $\alpha$-alumina seeds (d_{50}=0.36\mu\textrm{m}$) Disperal 20/1 and 10/1 containing $Cl^-$ produced spherical powder Disperal 20/2 with ${NO_3}^-$ produced equiaxed powder and Disperal 10/3 with $CH_3$ $COO^-$ irregular shaped and sized powder. All of these $\alpha$-alumina powders were submicron. Although the green density of the alumina powder derived from Disperal 10/1 by calcination at $1200^{\circ}C$/1h. was 53% it did not sinter even at $1550^{\circ}C$ for 2h. which implies that its d50 is greater than $3\mu\textrm{m}$. The others gave green densities in the range of 44~47% but they sintered as well as the AKP-30 at $1500^{\circ}C$/2 h or $1550^{\circ}C$/2 h.

• 한국세라믹학회지
• /
• 제25권2호
• /
• pp.136-142
• /
• 1988

β-Al2O3, which is used for solid electrolyte membrances in sodium-sulfur batteries, was prepared by sol-gel process. Sodium-n-propoxide NaOC3H7 and aluminum-isopropoxide Al(OC3H7)3 were hydrolyzated in the solution at pH 3, pH 7, pH 9 and pH 11, respectively. The sol-gel processed samples were calcined at several temperature steps, respectively and analysed by thermal analyser(DT-TGA), infrared spectrum analyser and X-ray diffraction analyser. The gelling rate of solution at pH 7 was much higher than that of the solution at pH 3. Thermal exchanging behavior of the gels at pH 3 were similar to Na2O·Al2O3·6H2O and, above pH 7, were similar to Na2O·Al2O3·3H2O. When samples' composition ratio was 9.13 : 90.87 [NaOC3H7:Al(OC3H7)3] at pH 7, β-Al2O3 was formed at 1100℃.

• 한국재료학회지
• /
• 제17권11호
• /
• pp.593-600
• /
• 2007

Aluminum was anodized in a $H_2SO_4$ solution, and titanium (IV) oxide ($TiO_2$) was electrodeposited into nanopores of anodic porous alumina in a mixed solution of $TiOSO_4$ and $(COOH)_2$. The photocatalytic activity of the prepared film was analyzed for photodegradation of methylene blue aqueous solution. Consequently, we found it was possible to electrodeposit $TiO_2$ onto anodic porous alumina, and synthesized it into the nanopores by hydrolysis of a titanium complex ion under AC 8-9 V when film thickness was about $15-20{\mu}m$. The photocatalytic activity of $TiO_2$-loaded anodic porous alumina ($TiO_2/Al_2O_3$) at an impressed voltage of 9 V was the highest in every condition, being about 12 times as high as sol-gel $TiO_2$ on anodic porous alumina. The results revealed that anodic porous alumina is effective as a substrate for photocatalytic film and that high-activity $TiO_2$ film can be prepared at low cost.

• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1138-1146
• /
• 1996

Al2TiO5 powder was prepared by the sol-gel processing from th metal alkoxides ; aluminium sec-butoxide (Al(OC4H9)3 and tetraethyl orthotitanate (Ti(OC2H5)4) The particles of Al2TiO5 produced from alkoxides were measured to be below $1.5mutextrm{m}$ and mre than 90% weere below 1 ${\mu}{\textrm}{m}$ however those from commercial alumina and titania were over 0.5-7${\mu}{\textrm}{m}$ and only 60% were below 1${\mu}{\textrm}{m}$ and 90% were below 2.5${\mu}{\textrm}{m}$ Therefore Al2TiO5 powder produced from alkoxides had the narrower distributionin size than that produced from the commercial alumina and titania powders. The addition of mullite or Al2O3 powder to the prepared aluminum titanate inhibited the grain growth and this resulted in decreased and increase in density.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2001년도 추계학술강연 및 발표대회
• /
• pp.57-57
• /
• 2001

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 추계학술발표회
• /
• pp.133-133
• /
• 1996

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.143-150
• /
• 2000

Wet-chemical process using ammonia to precipitate aluminum ion dissolved in a zirconia sol solution is examined. Formation of crystalline bayerite is unfavorable for fine dispersion of zirconia nanoparticles in alumina matrix after heat treatment. To avoid the bayerite formation, it was preferred to make a precipitation with a diluted ammonia or with an ammonia gas flow at high temperature. By optimizing the precipitation process and the calcination temperature, we successfully prepared the uniform microstructure in which tetragonal zirconia particles of ∼30nm is finely dispersed within the alumina grains.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.585-592
• /
• 1988

Aluminum sec-butoxide was synthesized from aluminum foil and alcohol. The characteristics of the alumina powder prepared from the synthesized alkoxide by the Yoldas method were studied. As a result of measuring the synthesized aluminum sec-butoxide by GC, the purity of the synthesized alkoxide was 98.7% on the basis of commercial alkoxide and the yield was 78.5%. A127-MASNMR analysis shows that powders dried at 9$0^{\circ}C$ and $\alpha$-Al2O3 have 6-cordinated structure and ${\gamma}$-Al2O3 has 4-coordinated structure. The characteristics of alumina powder prepared from the synthisized alkoxide showed the same characteristics with the alumina powder prepared from the commercial alkoxide.