• 분석과학
• /
• 제22권6호
• /
• pp.519-523
• /
• 2009

본 연구는 수용액 중에 존재하는 방사성 동위원소인 요오드 즉, 요오드이온($I^-$), 요오드산이온(${IO_3}^-$)및 요오드($I_2$)를 효과적으로 제거하는 방법에 관한 것이다. 별도로 물리적 화학적 변화의 과정이 필요하지 않고, 표면 개질된 활성 산화알루미늄과 활성탄을 이용하여 완전하게 제거할 수 있어 방사성 폐수 및 일반 산업폐수에도 유용하게 적용될 수 있다. 요오드이온($I^-$), 요오드산이온(${IO_3}^-$)의 혼합수용액 중의 각 이온들을 은 처리된 염기성 알루미나와 산성 알루미나를 이용한 흡착제거 방법으로 각각 99% 이상 제거하는 효과를 나타내었다.

• 한국재료학회지
• /
• 제9권8호
• /
• pp.843-848
• /
• 1999

A1 분말의 첨가량을 변화시킨 알루미나 쉘 몰드를 제조하여 소성조건에 따른 알루미나/실리카의 뮬라이트화 거동을 관찰하였다. 알루미나/실리카의 뮬라이트화 반응은 소성온도 및 A1 함량의 증가에 따라 증대함을 알 수 있었으나 쉘 몰드의 상온강도는 감소하였다. 각 소성조건에서 측정된 쉘 강도는 2.0~2.6kg/$\textrm{mm}^2$임을 알 수 있었다. Al의 첨가는 고온에서 쉘 몰드의 변형을 억제시켰다. 특히 2.5wt%%의 Al을 첨가한 후 $1000^{\circ}C$에서 1시간 유지한 시편에서는 변형이 일어나지 않았으며, 또한 Al을 첨가하지 않은 시편을 $1500^{\circ}C$에서 4시간동안 소성한 시편에서도 변형이 일어나지 않음을 알 수 있었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.25-29
• /
• 1998

Sliding wear test and surface characterization techniques such as micro-Raman spectroscopy were employed to determine the effect of whisker content and orientation on the friction and wear behavior of SiC whisker reinforced alumina. Composites containing unidirectionally oriented whiskers were fabricated by novel technique Addition of SiC whiskers up to 20 vol.% lowered the friction and improved wear resistance. The results of this study indicated that highly disordered graphite and size of the layer behind the whiskers were responsible for variation of wear rate and friction coefficient.

• 한국세라믹학회지
• /
• 제38권2호
• /
• pp.128-136
• /
• 2001

본 연구에서는 kaolin을 이용하여 반기상법, gel coating법, seed 첨가법으로 mullite를 합성하였으며 mullite 15 wt%를 고 알루미나질 내화물 원료에 첨가하여 내화물 시편을 제조하였다. 제조된 시편의 물성을 분석한 결과 seed 첨가법으로 제조된 mullite를 첨가한 시편의 물성이 338.60 MPa의 꺾임강도와 9,427 kgf/$\textrm{cm}^2$의 압축강도값을 나타내었다. 제조된 시편의 내화도 및 잔존선팽창수축률을 측정한 결과 나머지 두가지 방법으로 합성한 mullite나 일반적인 고 알루미나질 내화물에 비하여 좋은 특성을 나타내었다.

• 한국결정성장학회지
• /
• 제12권2호
• /
• pp.80-86
• /
• 2002

$Al_{2}O_{3}/SiC$ nanocomposites were made by infiltrating partially sintered alumina bodies with polycarbosilane (PCS) solutions, which is a SiC polymer precursor, with pressureless sintering. The SiC content, densification, phases, strength, and microstructure were investigated with the processing parameters such as PCS solution concentration and heat treatment condition for PCS pyrolysis and sintering. The results were compared with those for pure alumina and nanocomposite samples made by the existing polymer precursor route (i.e. the PCS addition process). The SiC contents of up to 1.5 vol% were obtained by the PCS infiltration. PCS pyrolysis, followed by air heat treatment, was needed before sintering to avoid a cracking problem and to attain a densification as high as 98 % of theoretical. The nanocomposites exhibited significantly higher strength than pure alumina and those prepared by the PCS addition process despite larger grain size. Besides $\alpha-Al_{2}O_{3}/SiC$ and $\beta-SiC$ phases, mullite was present a little in the nanocomposites, which resulted from the reaction of $SiO_{2}$ in the pyrolysis product of PCS with the $Al_{2}O_{3}$ matrix during sintering. The nanocomposites had intagranular particles believed to be SiC, which is a typical feature of $Al_{2}O_{3}/SiC$ nanocomposites.

• 한국수소및신에너지학회논문집
• /
• 제17권3호
• /
• pp.241-247
• /
• 2006

The catalytic performances for CO preferential oxidation in hydrogen-rich fuels were investigated by varying the types of alumina supports, additives excluding platinum, and synthetic methods of impregnation and sol-gel synthesis. The reactions were conducted in the range of $25{\sim}300^{\circ}C$ over Pt, Co, and/or Na impregnated catalysts supported on commercial gamma-alumina, pseudoboehmite, or sol-gel derived xerogels. Catalytic activities were enhanced by cobalt addition due to strong Pt-Co interactions in the bimetallic phase. Additional sodium promoted not only the formation of the Pt-Co bimetallic interphase but also oxygen adsorption capability, giving rise to increase in the CO oxidation rate at lower temperatures. Moreover, chemical interaction between Pt and Co was considerably enhanced by sol-gel synthesis.

• Korea-Australia Rheology Journal
• /
• 제20권2호
• /
• pp.65-71
• /
• 2008

Pressure filtration technique was used to obtain defect-free microstructure of green cast ceramic bodies. Stable alumina suspensions of desired rheology (<5 Pa s at $1\;s^{-1}$) containing 60-80 mass. % solid loading were prepared in the alkaline region (at $pH{\approx}9$) with an optimum amount of 0.5 dmb % of Tiron added. Acidic region (at $pH{\approx}4$) enabled the preparation of 60 mass. % suspensions with addition of 1.5 dmb % of Tiron. The best quality slip was processed from an 80 mass.% suspension with 63% of theoretical density. The homogeneity of particle packing and the absence of defects in microstructure were proven by narrow pore size distribution (ranging from 32 to 64 nm, with up to 85% abundance), confirming advantages of the wet consolidation route.

• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.415-423
• /
• 1996

황산니켈염 수용액에서 가압수소환원법을 이용하여 알루미나 분말상에 니켈 코팅층을 형성하기 위하여 실험조건(수소분압, 반응온도, $PdCl_{2}$ 첨가량, 알루미나의 종류 및 입도)을 변화시키면서 니켈이온의 환원속도 및 석출상태를 조사하였다. 환원온도 $165^{\circ}C$, 수소분압 300 psi, 코팅촉매제 $PdCl_{2}\;2\;mg/\ell$를 첨가한 조건에서 균질한 니켈코팅층을 얻을 수 있었다.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.380-386
• /
• 1997

The tribological properties of ceramics are very important in the application to engineering ceramic parts such as seal rings, pump parts, thread guides, and so on. In this study, the effects of graphite addition on the mechanical and tribological properties of alumina/graphite composites were investigated. The composites were prepared by the adding of graphite powder to the mixture of Al2O3, talc and calcium carbonate. Bending strength, water absorption, friction coefficient, the amount of worn out material at a certain time, and maximum surface roughness(Rmax) of the prepared composites were measured. Crystalline phases and microstructure were examined with XRD and SEM. The melt of Al2O3-CaO-MgO-SiO2 system was shown over 10 vol% graphite composition. As the amount of the graphite is increased, needle like crystals of mullite were formed and grown. We obtained the good properties of friction coefficients and wear resistance at the powder composition containing 15 vol% of graphite.

• 한국세라믹학회지
• /
• 제38권2호
• /
• pp.238-238
• /
• 2001

본 연구에서는 kaolin을 이용하여 반기상법, gel coating법, seed 첨가법으로 mullite를 합성하였으며 mullite 15 wt%를 고 알루미나질 내화물 원료에 첨가하여 내화물 시편을 제조하였다. 제조된 시편의 물성을 분석한 결과 seed 첨가법으로 제조된 mullite를 첨가한 시편의 물성이 338.60 MPa의 꺾임강도와 9,427 kgf/㎠의 압축강도값을 나타내었다. 제조된 시편의 내화도 및 잔존선팽창수축률을 측정한 결과 나머지 두가지 방법으로 합성한 mullite나 일반적인 고 알루미나질 내화물에 비하여 좋은 특성을 나타내었다.