• 한국세라믹학회지
• /
• 제33권11호
• /
• pp.1253-1259
• /
• 1996

In the fabrication of alumina-based multilayer ceramics sintering shrinkages with lamination conditions such as lamination pressure temperature and laminating with and without press die were compared. The sintering shrinkage was affected substantially by lamination pressure and temperature and in the case of laminatino without press die the lower laminated density and a large difference in shrinkage with direction were observed. These results can be explained by introducing a new factor which is the ratio of the changes of areas before and after lamination.

• 마이크로전자및패키징학회지
• /
• 제5권2호
• /
• pp.53-58
• /
• 1998

Sintering and dielectric characteristics of substrates were estimated by mixing rate of alumina and potashborosilicate glass(PBSG) powders. PBSG powders were used 7761(corning code)and alumina powders were used in extra pure rate(99.9%) and had 0.1 ${\mu}$m mean size. After ball milling with organic additives green sheets which were casted by doctor blade machine were sintered at 800$^{\circ}C$ for 1∼3hrs. Microstructure, linear shrinkage and dielectric constant of substrates were surveyed in order to fabricate low-dielectric and low tem-perature sintering substrate.

• 한국세라믹학회지
• /
• 제38권2호
• /
• pp.128-136
• /
• 2001

본 연구에서는 kaolin을 이용하여 반기상법, gel coating법, seed 첨가법으로 mullite를 합성하였으며 mullite 15 wt%를 고 알루미나질 내화물 원료에 첨가하여 내화물 시편을 제조하였다. 제조된 시편의 물성을 분석한 결과 seed 첨가법으로 제조된 mullite를 첨가한 시편의 물성이 338.60 MPa의 꺾임강도와 9,427 kgf/$\textrm{cm}^2$의 압축강도값을 나타내었다. 제조된 시편의 내화도 및 잔존선팽창수축률을 측정한 결과 나머지 두가지 방법으로 합성한 mullite나 일반적인 고 알루미나질 내화물에 비하여 좋은 특성을 나타내었다.

• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1147-1155
• /
• 1996

• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.367-376
• /
• 1992

The powder characteristics of seeded alumina prepared from alkoxide by sol-gel method were studied. When ${\alpha}$-Al2O3 seeded powders used, these ${\alpha}$ phase transformation temperatures decreased than those of unseeded powders by 110$^{\circ}C$ and fine powders under 0.1 $\mu\textrm{m}$ could be obtained. When Fe-nitrate added powders used, fast transformation rate resulted from ionic effects of Fe3+, but hard aggregated morphology exhibited. When ${\alpha}$-Al2O3 and Fe nitrate simultaneously added, these powders represented lower transformation temperature but resulted in microstructure with aggregated particles.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.655-664
• /
• 1988

As a part of study to establish the industrial process for manufacturing high purity alumina powder which is largely used as fine ceramics, an adsorption method using a silica-containing material which can absorb to eliminate a major impurity, Na in aluminum hydroxide as a raw material has been studied. It is confirmed that the primary property of powder such as the particle size of raw material and that of silica-containing material plays a great important role in the purification process.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.359-366
• /
• 1994

Tow types of supports were made using $\alpha$-Al2O3 powder and optimum conditions to prepare for supports were provided. Sol solution for coating was synthesized by sol-gel method with aluminum isopropoxide. Supports were coated and heat-treatemented, where the thickness of coating layer was controlled by dipping time. Flux and permeability of alumina membrane were measured by liquid and gas filtration apparatus and these were compared with the provided model. It was confirmed that the coating was done very well without micro~crack and defect.

• 한국세라믹학회지
• /
• 제31권5호
• /
• pp.513-519
• /
• 1994

In-situ 반응에 의하여 형성된 La-$\beta$-aluminate (LaAl11O18)로 강화된 알루미나 복합체에 정방정 ZrO2를 첨가하여 알루미나 복합체를 제조하였다. 사용된 분말 혼합체의 조성은 (100-x)[88 Al2O3+(La2O3+11 Al2O3)]+x vol% ZrO2였으며, x는 0부터 40까지 변화시켰다. 열간가압형성에 의하여 얻어진 치밀한 소결체는 1200MPa의 곡강도값을 나타내었다. 이러한 높은 곡강도값은 첨가한 ZrO2 입자와 기존의 La-$\beta$-aluminate platelets의 기지 입자에 대한 입성장 억제 효과와 ZrO2의 응력유기 상변태 효과로부터 기인하였다. 상기 복합체의 파괴 인성도 역시 8.58.5 MPa.m1/2까지 증가하였는데, 이러한 파괴인성의 증가는 ZrO2의 상변태 강화와 미세균열 강화, 그리고 La-$\beta$-aluminate와 ZrO2 입자의 균열 deflection과 bridging의 효과로 설명되어질 수 있다.

• 분석과학
• /
• 제32권4호
• /
• pp.121-130
• /
• 2019

Alumina is one of the most important ceramic materials because of its useful physical and chemical properties. Recently, high-purity alumina has been used in various industrial fields. This leads to increasing demand for reliable elemental analysis of impurities in alumina samples. However, the chemical inertness of alumina makes the sample preparation for conventional elemental analysis a tremendously difficult task. Herein, we demonstrated the feasibility of laser ablation for effective sampling of alumina powder. Laser ablation performs sampling rapidly without any chemical reagents and also allows simultaneous optical emission spectroscopy and mass spectrometry analyses. For six alumina samples including certified reference materials and commercial products, laser-induced breakdown spectroscopy (LIBS) and laser-ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) analyses were performed simultaneously based on a common laser ablation sampling. LIBS was found to be useful to quantify alkali and alkaline earth metals with limits-of-detection (LODs) around 1 ppm. LA-ICP-MS could quantify transition metals such as Ti, Cu, Zn, and Zr with LODs in the range from a few tens to hundreds ppb.

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.51-56
• /
• 2002

고순도 알루미나 분말에 소결조제로서 초산 마그네슘과 질산 마그네슘을 1000ppm첨가하여 제작한 소결체에 대해서 소결조제로 사용한 MgO의 출발물질의 종류가 소결체 특성에 미치는 영향을 고찰하였다. 초산 마그네슘과 질산 마그네슘을 사용해서 제작한 소결체에 대해서 소결온도 1$600^{\circ}C$에서 상대밀도의 급격한 감소가 확인되었고 SEM관찰결과 소결조제로 사용한 두 종류의 출발물질을 첨가한 경우에 동일하게 소결체의 outer layer에서는 입성장 및 기공이 형성되어있고 inner layer에서는 알루미나 입계에 제2상의 존재가 관찰되었다. 이 시편의 EPMA을 이용한 원소분석결과로부터 소결온도 1$600^{\circ}C$에서 알루미나 입계에 존재하는 제2상은 Mg를 함유한 혼합물이라는 것을 알 수 있었다.