• Title/Summary/Keyword: Alum

Search Result 381, Processing Time 0.026 seconds

Effect of Additives on Paper Aging (종이 첨가제가 종이의 노화에 미치는 영향)

  • 윤병호;이명구;최경화
    • Journal of Korea Foresty Energy
    • /
    • v.21 no.2
    • /
    • pp.25-33
    • /
    • 2002
  • One of the critical problems to preserve books and documents in libraries and archives is the deterioration. Some of previous results showed that the major cause of paper deterioration was the acid-catalyzed hydrolysis of the cellulose in paper fibres and aging rate of acidic paper was faster than that of alkaline paper. Therefore, It is necessary to remove the acid in the paper for reducing the rate of paper deterioration. It has been reported to extend the useful life of acidic paper by three to five times. Recently, It has been recognized the need for an effective method of deacidifying large quantities of books and document. However, in the previous many reports little attention was paid to the effect of paper additives. In this paper, We carried out experiment about the effect of additives on paper aging and the effect of deacidification by the gaseous ethanolamines (monoehtanolamine, diethanolamine, triehtanolamine). In result, it was found that the strength of aging was in the order of the alum+rosin>alum >AKD> control and the rate of deacidification was in the order of the monoethanolamine>diethanolamine>triethanolamine. The treatment with the gaseous ethanolamines caused decreasing of brightness and dropping of fold endurances. However, deacidification by combination treatment of the various gaseous ehtnaolamines prevented from decreasing of brightness and dropping of folding endurances.

  • PDF

A Study on Coagulation and Ozone Treatment of Nonbiodegradable Substances in Landfill Leachate (생물학적 난분해성물질을 함유한 매립장 침출수의 응집 및 오존처리에 관한 연구)

  • Kim, Jong Shik;Choi, Joon Ho
    • Applied Chemistry for Engineering
    • /
    • v.9 no.3
    • /
    • pp.330-335
    • /
    • 1998
  • The objectives of this study are summarized with two. The one is to remove of $COD_{Cr}$, color and turbidity with coagulation and ozonation in nonbiodegradable landfill leachate, the other is to compare of water qualities with pre-ozonation and post-ozonation. The results are summarized as follows ; 1) 90 minutes ozonation with $75mgO_3/min$($4.5gO_3/hr$) was conducted at pH 4,7, 10 to remove $COD_{Cr}$. Removal efficiencies were investigated with 48.2%, 52.6%, and 62.3% respectively. As increasing pH, $COD_{Cr}$ removal efficiencies were increased, it was considered that hydroxyl radical($OH{\cdot}$) which strongly oxdize and nonselectively react with organic compounds, was rapidly produced by ozone self-decomposition at high pH. 2) Alum, ferric chloride and ferrous sulfate were used for coagulation as inorganic coagulant. Ferric chloride was investigated with optimal coagulant, and it removed $COD_{Cr}$ about 12.0% at pH5 and dosage of $2,000m{\ell}/{\ell}$. Cation(C-101P), anion(A-601P) and nonion(SC-050) were tested to remove organic pollutants in landfill leachate. Cation(C-101P) was investigated with the most effective organic coagulant, and removal efficiency of $COD_{Cr}$ was 19.8% at pH5 and dosage of $100m{\ell}/{\ell}$. 3) Color and turbidity were removed up to 88.6%, 97.0% at pH10, when contacted 90 minutes with ozone, respectively. These removal efficiencies were much higher than those of $COD_{Cr}$ and $COD_{Mn}$. It was considered that ozone could oxdize the triggering materials of color and turbidity selectively and preferentially. 4) $COD_{Cr}$, color and turbidity were more effectively removed with pre-ozonation than post-ozonation about 8%, 3.5% and 1% respectively. These results were well corresponed with other's studies that pre-ozonation will increase the effect of coagulation.

  • PDF

The Effects of Anoxic Treatments on Color and Mechanical Property in Fabrics, Natural Dyed Fabrics, Papers, Natural Dyed Papers and Paints (저산소 농도 살충처리가 직물, 염색 직물, 종이, 염색지 및 채색편의 색상 및 기계적 성질에 미치는 영향)

  • Oh, Joon Suk;Choi, Jung Eun;Noh, Soo Jung;Eum, Sang Wook
    • Journal of Conservation Science
    • /
    • v.30 no.2
    • /
    • pp.219-234
    • /
    • 2014
  • Fabrics, natural dyed fabrics, papers, natural dyed papers and paints were examined effects of colors and mechanical properties for materials of museum collections under anoxic treatment. Anoxic conditions using nitrogen and argon were oxygen concentration 0.01%, temperature($20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$), 50% RH and exposure time 30 days. Examined fabrics were raw silk fabric, UV irradiated raw silk fabric, degummed silk fabric, UV irradiated degummed silk fabric, cotton fabric, and UV irradiated cotton fabric. Natural dyed silk and cotton fabrics were dyed with fresh indigo, indigo, safflower, gromwell, madder sappanwood, amur cork tree, turmeric, gardenia, barberry root, pagoda tree flower, cochineal, lac, alnus japonica, gallnut, chestnut shell, and combination(indigo and safflower, indigo and amur cork tree, indigo and pagoda tree flower, indigo and sappanwood). Papers were Korean papers(mulberry paper, mulberry(70%) and rice straw(30%) mixed paper), Japanese paper(gampi paper), cotton paper, refined linen paper, cotton, linen & manila mixed fibre furnish, copy paper, news print, and alum sized mulberry paper. Natural dyed papers were dyed with indigo, sappanwood, madder, safflower, gardenia, amur cork tree, and pagoda tree flower. Paints were painted on alum-sized papers and silk fabrics using glue and pigments(azurite, malachite, cinnabar, vermilion, orpiment, gamboge, red lead, haematite, iron oxide red, indigo(lake), lac, cochineal, safflower, madder root lake, celadonite, smalt, ultramarine blue, lapis lazuli, prussian blue, kaolin, lead white, oyster-shell white, and clam-shell white). The color differences(${\Delta}E^*$) of all examined materials were below 1.5 or lowered than control samples after anoxic treatment. The variations of tenacity of yarns of fabrics and natural dyed fabrics after anoxic treatment were within that of standard silk and cotton fabrics. Gases(nitrogen and argon) and temperatures of anoxic treatment did not also affected color differences and variations of tenacity of materials.

A Comparative Study of the Oriental and the Occidental Medical Literature on the Etiologies & Treatments for Palmoplantar Hyperhidrosis (수족한(手足汗)의 원인(原因)과 치료법(治療法)에 대한 동(東).서의학적(西醫學的) 고찰(考察))

  • Ko, Young-Chul;Shin, Jo-Young
    • The Journal of Internal Korean Medicine
    • /
    • v.18 no.2
    • /
    • pp.268-295
    • /
    • 1997
  • Sweating is natural phenomenon necessary for the regulation of an individual's body-temperature. The secretion of sweat is mediated by a portion of our vegetative nervous system(the sympathetic nervous system). In some people, this system is working at a very high activity level, far higher than needed to keep a constant temperature. This condition is referred to as hyperhidrosis. Especially excessive sweating of the hands and the feet is palmoplantar hyperhidrosis or volar hyperhidrosis. This is by far the most distressing condition. It was founded that the first important cause of this was emotional factor. The hands are much more exposed in social and prefessional activities than any other part of our body. Many individuals with palmoplantar hyperhidrosis are limited in their choice of proffession, because unable to manipulate materials sensitive to humidity or reluctant to shake hands; some patients arrive to the point to avoid social contact. The occidental medical treatments for palmoplantar hyperhidrosis include application of topical agents(chemical antiperspirants such as aluminum chloride), iontophoresis(treatment with electrical current), or surgery(thoracic sympathectomy). It was reported that the most effective treatment was thoracic sympathectomy. So this study was started to find the easy and effective oriental medical treatments against the occidental medical treatments through the oriental medical literature. The occidental medical idea for palmoplantar hyperhidrosis is only limited in neurologic system, so surgery is the best treatment. But the oriental medical idea for palmoplantar hyperhidrosis is much wider, so the oriental medical causes and treatments for this are able to be veriety. And the oriental medical teatment is freely in treating the patients of palmoplantar hyperhidrosis, because entire idea including pulse, facial color, mental condition, constitution and other symptom exists in the oriental medicine. The results of a bibliographic study of causes and treatments for palmoplantar are as follows; 1. The main causes of pa1moplantar hyperhidrosis are heat in the stomach, damp-heat in the spleen and the stomach, insufficiency of the spleen-qi and the stomach-qi, deficiency of the spleen-yin and the stomach-yin, and the others are the stomach-cold syndrome, stasis of blood and dyspepsia in the stomach, disorder of the liver-qi, deficiency of the heart-yin and the kidney-yin, deficiency of the heart-yang and the kidney-yang, stagnated heat in the liver and the spleen, the lung channel-heat etc. 2. The main methods of medical treatments for palmoplantar hyperhidrosis are clearing out the stomach-heat, eliminating dampness and heat in the spleen and the stomach, invigorating the spleen-qi and the stomach-qi, reinforcing the spleen-yin and the stomach-yin, warming the stomach, relaxing the liver and alleviating of mental depression and tonifying the heart and the kidney etc. 3. The main prescriptions of palmoplantar hyperhidrosis are Taesihotang, Palmultang-kakam, Samyeongbaechusan, Chongbisan, Sasammaekmundongtang, the others are Leejungtang, Hwangkikonjungtang, Seungkitang, Boyumtang, Baekhotang, Chongsimyonjayum, Moyrosan, etc. 4. Local medicine for external use are liquid after boiling alum in water for about 1 or 2 hours, liquid after boiling alum and pueraria root in water and liquid after boiling stragalus root, pueraria root, ledebouriella root and schizonepeta in water, etc. 5. The methods of acupuncture therapy include invigorating Bokyru, Yumkuk and purgating Hapkouk, or invigorating Bokyru, Kihae and purgating Hapkouk, or steadying Hapkouk, Nokung.

  • PDF

Studies on the Utilization of Sweet Potatoes for Takju Brewing (탁주양조원료(濁酒釀造原料)로서 고구마의 이용(利用)에 관(關)한 연구(硏究))

  • Kim, Chan-Jo;Choi, Woo-Young;Oh, Man-Jin
    • Applied Biological Chemistry
    • /
    • v.15 no.3
    • /
    • pp.213-219
    • /
    • 1972
  • In order to utilize sweet potatoes for the material of Takju, brewing experiments with raw sweet potatoes, sweet potato chips powder and its koji were conducted; and various tests were carried out on effect of the treatments of acid, alkali, polyphenol oxidase inhibitor, oxidizing and reducing agents upon the prevention against coloring of sweet potato chips by steaming, and on peeling effect of sweet potatoes by the alkali and heat treatments. The results obtained were as follows. 1) In the case of brewing with raw sweet potatose, each plot showed low acid and ethanol content, and its finished Takju had an undersirable color and odor. The plots which were mashed after peeling showed higher ethanol contents than the plots mashed without peeling. 2) In the case of brewing with sweet potato chips powder, each plot contained considerably more amount of ethanol than the plots brewed with raw sweet potatoes, white it contained less amount of acid. The ethanol contents of the plots using wheat bran koji were $10.5{\sim}11.4$ per cent 4 days after mashing, and were higher than those of the plots using malts powder. Their finished Takju was inferior in quality because of the lack of acid and being darkened gradually in process of time. 3) The kojies which were made of sweet potato chips powder with Neurospora sitophila or Aspergillus oryzae had good appearance, but the Takju mashes brewed with these contained remarkably less amount of ethanol. 4) Effect of the treatments of acid, alkali, polyphenol oxidase inhibitor and organic solvents such as ether and ethanol upon the prevention against coloring of sweet potato chips was not recognized. Alum and burnt alum were effective a little on the decolorization, and among the oxidizing and reducing agents tested, potassium permanganate was most effective. 5) Darkening of sweet potato chips powder in course of heating after mixing with water was not affected by pectin and amino acids, but by tannin. 6) Sweet potatoes were not peeled easily by friction after soaking in the boiling solution of 3 per cent alkali for 6 minutes and peeled in boiling water for 12 minutes. From the viewpoint of the results above mentioned, it seems to be necessary to study further on the isolation of microorganisms which are able to decompose the coloring substances and yeasts which are adequate for the fermentation of sweet potatoes in order to utilize sweet potatoes for Takju brewing, because brewing with raw sweet potatoes, sweet potato chips powder and its koji was unsuccessful, and effect of the various treatments on the decolorization of sweet potatoes was not recognized.

  • PDF

Folk Remedies for First Aid at Home (가정내 응급처치를 위한 민간요법)

  • Kang, Hyun-Sook;Cho, Kyoul-Ja
    • Journal of East-West Nursing Research
    • /
    • v.3 no.1
    • /
    • pp.17-26
    • /
    • 1998
  • The purposes of this study were to identify the contents, frequency of use, and the rationales of folk remedies frequently used for first aid at home for stomachache, vomiting, strain, food poisoning, vaginal bleeding, or wounds of snake or dog bite, or bee sting. As the method of the study, data were collected by conducting a questionnaire of 185 persons, who filled it out or who were interviewed from May to August in 1998. The collected data was analyzed by using frequency and the rationales for the contents of the folk remedies were described base on literatures. The results were as follows,. 1. The folk remedies for stomachache in frequency order were 'warming the abdomen', 'rubbing the abdomen with a hand', or 'pricking a finger to bleed', which have the rationals. 2. The folk remedies for vomiting in frequency order are 'drinking water of watery radish' and 'pricking a finger to bleed', which have the rationales. 3. The folk remedies for strain in frequency order are 'soaking the affected area into cold water or applying an ice pack' and 'after soaking jasmine in water, making a dough with flour, and then attaching it on the affected area', which have the rationales, Additionally, although the frequencies are low, 'drinking brewed Achyranthis Radix' and 'applying brewed leaves and stalks of Sambuci Cortex' have the rationales. 4. The folk remedies for food poisoning in frequency order are 'drinking black beans and licorice brewed together' and 'eating mung beans', which have the scientific grounds. 5. The folk remedies for bloody discharge in frequency order are 'drinking brewed lotus root' and 'eating boiled chicken stuffed with root of bell-flower'. However, 'drinking brewed Thujae orientalis Folium' has the rationales. 6. The folk remedy for snake bite wounds that has the scientific grounds is 'sucking blood by a person without hurt in the mouth'. However, quite a lot of people apply alum or soy paste, which has no rationales. 7. The folk remedies for the bee sting in frequency order are 'after removing the sting, applying soy paste or sauce' and 'applying saliva'. No rationales for 'applying saliva' have been found. 8. The folk remedy for the dog bite wound that has the rationales is 'applying juice of leaves or stalks of Xanthii Fructus'. However, 85% of surveyed people use remedies that have no scientific grounds, such as 'applying burnt dog hair mixed with (sesame) oil' and 'applying soy paste or sauce'. Various materials are used in folk remedies for first aid treatment as shown above. Some of the folk remedies have the rationales since their medicinal actions have been found. However, the medicinal actions of the majority have not been found, but only known that they are effective, Especially for the materials except botanical drugs, they are used without knowing the effects since their components and pharmacognosies have not been described in any literature. The results of this research may be used for materials to educate the surveyed people or to consult them. Accordingly, the folk remedies that have the rationales are required to continue to study to find out the effects.

  • PDF

Dyeability and Antibacterial Activity against Food Poisoning Bacteria Dyed with Geranium nepalense Extracts (이질풀 추출물로 염색한 면직물의 염색성과 항식중독균성)

  • Park, Yun-Jum;Kim, Hyun-Ju;Park, Yong-Seo;Cho, Ja-Yong;Jang, Hong-Gi;Heo, Buk-Gu
    • Korean Journal of Medicinal Crop Science
    • /
    • v.14 no.3
    • /
    • pp.139-142
    • /
    • 2006
  • This study was conducted to develop antibacterial hand towel and dishcloth against food poisoning bacteria, and to examine the dyeability and the antibacterial activity of cotton fabrics against food poisoning bacteria, which was dyed with 1 % extracts of Geranium nepalense at $50\;to\;60^{\circ}C$ minutes. Surface colors of cotton fabrics treated nothing, alum $[AIK(SO_4)_2{\cdot}nH_2O]$, and calcium hydroxide $[Ca(OH)_2]$ with mordants showed grayed-yellow group, that treated copper sulfate $(CUSO_4)$ with mordant was grey-brown group, and that treated sulfate of iron $(FeSO_4{\cdot}7H_2O)$ made grayed-green group. Hue value of cotton fabrics dyed with the extracts of Geranium nepalense and dried until twenty times was an order of descent Y, that dried thirty to forty an order of descent YR. Cotton fabrics dyed with the extracts of Geranium nepalense had the antibacterial activity against food poisoning bacteria such as Staphylococcus aureus, Escherichia coil and Salmonella typhimurium by over 99.99%. And that dried over thirty times showed the antibacterial activities against food poisoning bacteria by 52.91%.

Characteristics of The Wastewater Treatment Processes for The Removal of Dyes in Aqueous Solution(1) - Chemical Precipitation or Biological Treatment - (수용액 중의 염료 제거를 위한 폐수처리공정의 특성(1) -화학적 응집 및 생물학적 처리-)

  • Han Myung Ho;Huh Man Woo
    • Textile Coloration and Finishing
    • /
    • v.17 no.2 s.81
    • /
    • pp.31-39
    • /
    • 2005
  • This study was conducted to remove the dyes in dye wastewater by the chemical precipitation or biological treatment which are one of the main pollutants in dye wastewater. In order to remove the disperse dyes effectively in aqueous solution by chemical precipitation process, coagulation and flocculation tests were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(DB79), and we could get the best result for the removal of disperse dye(DB56) in the aspects of TOC removal efficiency and sludge yield. When the Ferrous sulfate dosage was 800mg/l, the sludge settling velocity was very fast$(SV_{30}=4\%)$, and the color was effectively removed in the disperse dye(DB79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge yield decreased in comparison with the Ferrous sulfate or the Ferric sulfate being used in the disperse dye(DB56) solution. In order to decolorize disperse dye(DR17) by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. The optimal culture conditions of temperature and pH were found to be $40^{\circ}C\;and\;8.5\~9$, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest$(93\%)$ among the nitrogen sources. The strain screened was excellent to adjust to pH, and it seems to have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_{4.}\cdot7H_2O\;and\;KH_2PO_4$ were $0.1\%(w/v)\;and\;0.2\%(w/v)$, respectively. Strains degrading and decolorizing reactive dyes, RB198 and RR141 which were isolated from water system, are named RBK1 and RRK. And the cell growth characteristics of RBK1 and RRK were investigated. The optimal culture conditions of temperature and pH were found to be 30t' and 7.0, respectively. Optimum nitrogen source was peptone, and it was found that decolorization efficiencies by strains RBK1 and RRK, were $85\%\;and\;62\%$, respectively, with introduction of 4,000mg/l of peptone. In the case of RBK1, color removal efficiencies were very high below 400mg/l. Decolorization efficiency was over $90\%$ at 20hours of culture time. The Color degradation ability of RRK was lower than that of RBK1.

Measuring of Cadmium Content in Sorghum(Sorghum bicolor (L.) Moench) (수수(Sorghum bicolor (L.) Moench)의 카드뮴 함량 측정 방법)

  • Park, Byung-Hoon;Lee, Su-Chan;Choi, In-Sub;Kim, Jun-Ho;Lee, Hyo-Jeong;Park, Mun-Soo;Kim, Sang-Deog A.
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.28 no.3
    • /
    • pp.185-192
    • /
    • 2008
  • We have studied effect of water treatment sludge (WTS) on trace metals of sorghum hybrid (Sorghum bicolor (L.) Moench). In the present report it was for cadmium (Cd) content on background correction (BGC) mode with an atomic absorption spectrophotometer. The four treatments were Control, Compost, Alum + nitrogen, phosphorus, potassium (NPK), Compost + NPK. In the analysis, burner height of the atomic absorption spectrophotometer was adjusted to three levels; 3 mm, 6 mm, 9 mm. As a conclusion, 3 mm and 6 mm burner height conditions were better than 9 mm height for Cd analysis. And the conditions for widening the range, the mean, and the standard deviation (SD) values of observed absorbances as well as the condition for lessening the mean of observed background values are necessary for getting the better measuring of Cd. At the present experiment, 6 mm burner height condition is the best among the three burner heights.

Strength properties of composite clay balls containing additives from industry wastes as new filter media in water treatment

  • Rajapakse, J.P.;Gallage, C.;Dareeju, B.;Madabhushi, G.;Fenner, R.
    • Geomechanics and Engineering
    • /
    • v.8 no.6
    • /
    • pp.859-872
    • /
    • 2015
  • Pebble matrix filtration (PMF) is a water treatment technology that can remove suspended solids in highly turbid surface water during heavy storms. PMF typically uses sand and natural pebbles as filter media. Hand-made clay pebbles (balls) can be used as alternatives to natural pebbles in PMF treatment plants, where natural pebbles are not readily available. Since the high turbidity is a seasonal problem that occurs during heavy rains, the use of newly developed composite clay balls instead of pure clay balls have the advantage of removing other pollutants such as natural organic matter (NOM) during other times. Only the strength properties of composite clay balls are described here as the pollutant removal is beyond the scope of this paper. These new composite clay balls must be able to withstand dead and live loads under dry and saturated conditions in a filter assembly. Absence of a standard ball preparation process and expected strength properties of composite clay balls were the main reasons behind the present study. Five different raw materials from industry wastes: Red Mud (RM), Water Treatment Alum Sludge (S), Shredded Paper (SP), Saw Dust (SD), and Sugar Mulch (SM) were added to common clay brick mix (BM) in different proportions. In an effort to minimize costs, in this study clay balls were fired to $1100^{\circ}C$ at a local brick factory together with their bricks. A comprehensive experimental program was performed to evaluate crushing strength of composite hand-made clay balls, using uniaxial compression test to establish the best material combination on the basis of strength properties for designing sustainable filter media for water treatment plants. Performance at both construction and operating stages were considered by analyzing both strength properties under fully dry conditions and strength degradation after saturation in a water bath. The BM-75% as the main component produced optimum combination in terms of workability and strength. With the material combination of BM-75% and additives-25%, the use of Red Mud and water treatment sludge as additives produced the highest and lowest strength of composite clay balls, with a failure load of 5.4 kN and 1.4 kN respectively. However, this lower value of 1.4 kN is much higher than the effective load on each clay ball of 0.04 kN in a typical filter assembly (safety factor of 35), therefore, can still be used as a suitable filter material for enhanced pollutant removal.