• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.38-43
• /
• 2005

Natural Com Starch(NCS) spray system has been widely used In multiply board mill for the better bonding strength between board layers. However the unsuitable NCS spray system could lead to a drop in plybond efficiency of multiply board. It could also result in the accumulation of unretained-starch in the white water system, which could not only rise in BOD and COD level but also reduce the effects of rosin-alum sizing system and other additives. In this study, the simple and rapid method by UV-spectroscopy for measuring the starch contents in the white water was proposed, and the quantitative analysis for dissolved starch content in white water was carried out in two kinds of board production process. It could be confirmed that about 150 ppm of oxidized starch was retained in white water dewatered from undertop ply of multiply board process, and about 470 ppm of natural starch was dissolved in white water originated from unsuitable spraying system in the multiply board production lines for cup base paper.

• Korean Membrane Journal
• /
• v.7 no.1
• /
• pp.58-66
• /
• 2005

Nanofiltration (NF) of a dyeing wastewater was carried out using polyamide NF-membranes. Before applying the wastewater to the membrane process, it was pretreated with various chemical coagulants such as alum, ferric chloride and HOC-100A. In order to see the effect of the pretreatment of the wastewater using chemical coagulants on the membrane separation process, the optimum conditions for the coagulation and sedimentation process using the chemical coagulants were sought. By the pretreatment, despite the different coagulants used, the chemical oxygen demand (COD) and UV-absorbance of the wastewater were lowered by more than $70\%$. The pretreated wastewater was then applied to the membrane process. The effect of the coagulants used for the pretreatment on the membrane fouling was studied. From this study, it was found that the HOC-100A was the best out of the coagulants used far the removal of the materials that could cause membrane fouling.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.799-806
• /
• 2005

Applying coagulation process before membrane filtration showed not only reducing membrane fouling, but also improving the removal of dissolved organic materials that might otherwise not be removed by the membrane alone. Also, slow mixing didn't affect the reduction of membrane fouling, and rapid mixing using an in-line static mixer was more effective than using backmixer. In addition, only 11 percent of dissolved organic matter in raw water was the primary cause of fouling. Furthermore, tile primary foulant of UF membrane was hydrophobic substance, which can easily be removed by coagulation.

• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.194-201
• /
• 2015

Cotton and silk fabrics were dyed with Houttuynia cordata extract using aqueous ethanol solution and the dyeing and post-treatment conditions were optimized to impart antimicrobial activity to the fabrics. The dried Houttuynia cordata can be extracted at $80^{\circ}C$ for 3 hours using an aqueous ethanol solution containing 70%(w/w) ethanol. For the highest color yields. Both cotton and silk fabrics can be dyed at $100^{\circ}C$ for 60min with 10g/L of NaCl under pH 4. Silk fabrics can be dyed to higher K/S than cotton fabrics. The color fastness properties of the dyed fabrics were good when either citric acid crosslinking or aluminum alum mordanting was carried out as a post treatment. The dyed silk and cotton fabrics with the post treatments showed excellent antimicrobial activity against both Staphylococcus aureus and Klebsiella pneumoniae.

• Korean Journal Plant Pathology
• /
• v.10 no.4
• /
• pp.325-332
• /
• 1994

In order to find out formulation and effect of soil amendment on Fusarium wilt of sesame caused by Fusarium oxysporum f. sp. vasinfectum, the study was conducted during the last two years of 1992 to 1993. Among 14 chemicals (1%, w/w) added to soil including CaO individually, Al2(SO4)3, Alum, and CaO suppressed mycelial growth and conidial germination of F.oxysporum f. sp. vasinfectum. CaCl2 suppressed mycelial growth only, while glycerine, KCl, K2 HPO4, and triple superphosphate suppressed conidial germination. Suppression rate was ranged from 21 to 100% on mycelial growth. The 8 chemicals were finally selected. Among the 4 organic compounds, composted pine bark showed definite suppression on mycelial growth and conidial germination of the fungus, whereas milled alfalfa leaves was only effective on conidial germination of Fusarium wilt pathogen. The antagonist Trichoderma harzianum grew well in the soil medium amended with the composted pine bark and chemicals mixture (CPM) amendment (1%, w/w) and suppressed mycelial growth of the fungus effectively. In pot test, Fusarium wilt of sesame was completely controlled by CPM amendment.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.18-26
• /
• 1991

This study was carried out to examine not only the effect and the process of activation of aluminum sulfate for the manufacture of PB and MDF, but also application of the activation treatment to PB and MOF made with MDI adhesive. The results were as follows: 1. For the manufacture of PB, activating effect did not take place Because the low moisture content of 30% in the process of activation treatment made probably insufficient activation. It needs to examine higher moisture content for the uniform and enough activation same as that of MOF. 2. In the case of MOF, Activating effect was excellent, it showed not only better results of MOR 48%, MOE 29%, IB 60% than those of the control but also better dimensional stability. 3. Application of alum activation to the PB and MDF made with MDI adhesive yielded no effects. Maybe it was the reson that the curing mechanism of MDI is different. 4. Modifing the wood surface was the oxidation and wettability was not the variable limiting glueline performance. It is necessary to make a more study about activating reaction.

• Food Science of Animal Resources
• /
• v.36 no.1
• /
• pp.14-18
• /
• 2016

Oral administration of soluble antigen can induce peripheral tolerance to the antigen. This study was conducted to evaluate whether gamma-irradiated ovalbumin (OVA) can induce oral tolerance. To investigate this, we administrated intact or irradiated OVA to mice, induced allergic response using intact OVA and alum, then compared humoral and cellular immune responses. Mice treated with gammairradiated OVA had less OVA-specific IgE compared with those who were administered intact OVA. There was no difference in levels of OVA-specific IgG+A+M, IgG1, and IgG2a. Splenocytes of mice administered irradiated OVA showed similar OVA-specific T cell proliferation and secretion of IFN-γ and IL-4. However, there was an increase in IL-2 and a decrease of IL-6 secretion in mice treated with irradiated OVA. These results indicate that gamma-irradiated OVA have similar effects to intact OVA on antigen tolerance.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.2
• /
• pp.191-200
• /
• 2004

DAF process has been designed considering raw water quality characteristics in Korea. Although direct filtration is usually operated, DAF is operated when the freshwater blooms occut or raw water turbidity become high. Pre-sedimentation iS prepared in case when raw water turbidity is very high by rainstorms. A main feature of this plant is that the operation mode can be changed (controlled) based on the characteristics of raw water to optimize the effluent quality and the operation costs. Treatment capacity (surface loading rate) and efficiency of DAF was found to be better than conventional sedimentation process. Moreover, low-density particles (algae and alum flocs) are easily separated while it is difficult to remove in sedimentation. One of the main concerns in adoption of DAF (Dissolved Air-Flotation) process is a high raw water turbidity problem. That is, DAF is not adequate for raw water, which is more turbid than 100NTU. In order to avoid this problem, pre-sedimentation basins are prepared in DAF plant to decrease the turbidity of DAF influent. For simulation of the actual operation, bench and full-scale tests were performed for highly turbid water conditions. Consequently, DAF process coupled with sedimentation is suggested that pre-sedimentation with optimum coagulation prior to DAF would be appropriate.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.6
• /
• pp.413-420
• /
• 2019

Pretreatment system of desalination process using seawater reverse osmosis(SWRO) membrane is the most critical step in order to prevent membrane fouling. One of the methods is coagulation-UF membrane process. Coagulation-UF membrane systems have been shown to be very efficient in removing turbidity and non-soluble and colloidal organics contained in the source water for SWRO pretreatment. Ferric salt coagulants are commonly applied in coagulation-UF process for pretreatment of SWRO process. But aluminum salts have not been applied in coagulation-UF pretreatment of SWRO process due to the SWRO membrane fouling by residual aluminum. This study was carried out to see the effect of residual matal salt on SWRO membrane followed by coagulation-UF pretreatment process. Experimental results showed that increased residual aluminum salts by coagulation-UF pretreatment process by using alum lead to the decreased SWRO membrane salt rejection and flux. As the salt rejection and flux of SWRO membrane decreased, the concentration of silica and residual aluminum decreased. However, when adjusting coagulation pH for coagulation-UF pretreatment process, the residual aluminum salt concentration was decreased and SWRO membrane flux was increased.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.87-96
• /
• 1995

Colorant concentrates are prepared by use of concentration method of colorants extracted from Sappan wood using met hanol. Dyeabilities and fastness properties of silk fabrics dyed with concentrate of Sappan wood are investigated.The results obtained are as follows; 1. The storage stability of colorant concentrate is poor as concentration is excess. 2. Because the colors of dyeings are different with mordants, aluminium acetate, copper acetate, chromium alum and tin chloride are used in order to obtain reddish color. 3. The optimum dyeing temperature and dyeing time are 6$0^{\circ}C$ and 60 min, respectively. 4. Dry cleaning fastness is very good, and light fastness and washing fastness are low. 5. The dyeing method is simple owing to usehess of colorant concentrate prepared without extraction of colorant every time.