• Title/Summary/Keyword: Altitude Decrease

Search Result 89, Processing Time 0.024 seconds

Classification of Korean Benthic Macroinvertebrate Types Using the TWINSPAN Clustering and Discriminant Analysis of Environmental Factors Affecting the Distribution of the Types (TWINSPAN 기법을 이용한 한국의 저서성 대형무척추동물의 유형분류 및 유형분포에 영향을 미치는 환경요인에 대한 판별분석)

  • Min, Jeong-Ki;Kim, Dong-Hee;Moon, Jeong-Suk;Kim, Jin-Young;Kong, Dongsoo
    • Journal of Korean Society on Water Environment
    • /
    • v.34 no.6
    • /
    • pp.602-620
    • /
    • 2018
  • Korean benthic macroinvertebrate community from 959 sites and 14 environmental factors that could affect the biological distribution were surveyed and analyzed. The 438 taxa were divided into six groups according to TWINSPAN. Based on the environmental factor values corresponding to each taxon, the average and range of environmental factors for each biological group tended to increase or decrease in eight environmental factors (altitude, slope, current velocity, fraction of fine particles in substrates, turbidity, $BOD_5$, T-N and T-P). As a result of discriminant analysis (hit ratio: 69.6 %), environmental factors that significantly influence the distribution of each biological group were $BOD_5$, altitude, catchment area, T-N, T-P and fraction of fine particles in substrates. The discriminant functions 1 and 2 classified the existing six biological groups (clustered by TWINSPAN) into five (group 1: highland highly sensitive group; group 2: lowland sensitive group, group; 3 and 4: lowland slightly tolerant group; group 5: lowland tolerant group; group 6: lowland highly tolerant group). Most of the benthic macroinvertebrates were identified in the species level. However, a few others were identified in genus or family level, too. Even the organisms belonging to the same genus or family may prefer different environmental factors in the species level, the identification of characteristic of the habitat environment preferred by organism and species level identification of these organisms are utmost. The results of this study may be used as basic information on environmental factors which can be considered in preservation and restoration research for biodiversity.

Effect of Forest Road Types on Salivary Cortisol, Blood Lactate and Heart Rate during Walking Exercise

  • JaeHeon Son;Junwon Min;KiHong Kim
    • International journal of advanced smart convergence
    • /
    • v.12 no.4
    • /
    • pp.386-394
    • /
    • 2023
  • This study investigated changes in salivary cortisol, lactic acid, and heart rate along the route during walking exercise in a forest environment for the purpose of reducing stress. Walking exercise in a forest environment was conducted on a Hill Type (Distance: 800m, Average slope 25°, Altitude 112m) and Step Type (Distance: 800m, Average slope 25°, Altitude 114m) routes for 10 female college students in their 20s. The subjects were asked to walk at a speed of 60 bpm. The resulting changes in salivary cortisol, lactate, and average heart rate during exercise were compared and analyzed using Repeated Measurement two-way ANOVA, and the maximum heart rate during exercise and average heart rate at rest were compared and analyzed using paired t-test, and the following results were obtained. First, there was no significant difference in salivary cortisol depending on the type and period of the forest, but it tended to gradually decrease. Second, there was a significant difference in lactic acid depending on the type and period, and it was higher in Step Type. Third, there was a significant difference in the average heart rate during exercise, and it was higher in Step Type. Fourth, there was a significant difference in maximum heart rate during exercise, and it was higher in Step Type. Fifth, there was no significant difference in average heart rate during rest. In summary, walking exercise in a forest environment can be effective for stress reduction for female college students in their 20s, but it appears that forest routes should be selected according to physical strength level, and walking exercise in a forest environment for long periods of time is not recommended. For this purpose, it is suggested that it is appropriate to select the Hill Type route.

Future Projection of Changes in Extreme Temperatures using High Resolution Regional Climate Change Scenario in the Republic of Korea (고해상도 지역기후변화 시나리오를 이용한 한국의 미래 기온극값 변화 전망)

  • Lee, Kyoung-Mi;Baek, Hee-Jeong;Park, Su-Hee;Kang, Hyun-Suk;Cho, Chun-Ho
    • Journal of the Korean Geographical Society
    • /
    • v.47 no.2
    • /
    • pp.208-225
    • /
    • 2012
  • The spatial characteristics of changes in extreme temperature indices for 2070-2099 relative to 1971-2000 in the Republic of Korea were investigated using daily maximum (Tmax) and minimum (Tmin) temperature data from a regional climate model (HadGEM3-RA) based on the IPCC RCP4.5/8.5 at 12.5km grid spacing and observations. Six temperature-based indices were selected to consider the frequency and intensity of extreme temperature events. For validation during the reference period (1971-2000), the simulated Tmax and Tmin distributions reasonably reproduce annual and seasonal characteristics not only for the relative probability but also the variation range. In the future (2070-2099), the occurrence of summer days (SD) and tropical nights (TR) is projected to be more frequent in the entire region while the occurrence of ice days (ID) and frost days (FD) is likely to decrease. The increase of averaged Tmax above 95th percentile (TX95) and Tmin below 5th percentile (TN5) is also projected. These changes are more pronounced under RCP8.5 scenario than RCP4.5. The changes in extreme temperature indices except for FD show significant correlations with altitude, and the changes in ID, TR, and TN5 also show significant correlations with latitude. The mountainous regions are projected to be more influenced by an increase of low extreme temperature than low altitude while the southern coast is likely to be more influenced by an increase of tropical nights.

  • PDF

Occurence of Zn-Pb Deposits in Danjang-Myeon, Milyang Area (밀양 단장면 일대에 발달하는 아연-연 광화대의 산출특성)

  • Kwak, Ji Young;Kang, Chang Won;Joo, Soo Young;Jeong, Jae Han;Choi, Jin Beom
    • Journal of the Mineralogical Society of Korea
    • /
    • v.28 no.3
    • /
    • pp.279-292
    • /
    • 2015
  • New occurrences of large-scaled Zn-Pb deposits are recently found in the Danjang-myeon, Milyang. They are skarn-type deposits which replaced the intercalated limestone beds in the Jeonggaksan Formation. This study aims at characterizing occurrences, mineralogy, and chemistry of Zn-Pb ores and skarn minerals. Skarn orebodies are mainly found in 3 areas, named Gukjeon-ri, Gorye-ri, and Gucheon-ri orebodies, where sphalerite found as main ore mineral in 200-300 m in height and amount of galena increases as altitude does. Ores are dark grey to dark green in color and closely related with clinopyroxene zone. They occur with hedenbergite, grossular, actinolite, epidote, and small amounts of axinite, calcite, and quartz. Main ore mineral is sphalerite which includes tiny spotted grains of galena and chalcopyrite and becomes rich in grade in association with clinopyroxene and epidote. FeS contents in sphalerite show relatively wide range between 1.53 and 23.07 mole%, whose contents intend to increase towards biotite granite known as ore-related igneous rocks. CdS contents are in the range of 0.22-0.93 mole%, showing decrease tendency from southwest (Gukjeon-ri) to northeast (Gucheon-ri). Zn-Pb deposits developed in Danjang-myeon reveal decrease in temperature with increase of altitude, leading to gradual changes in compositions of ore and skarn minerals.

A Study on the Production and Decomposition of Litters, of Pine Forests in South Korea (남한의 송백림에 있어서 낙엽의 생산과 분해에 관한 연구)

  • Chang, Nam-Kee;Nam-Chang Park
    • The Korean Journal of Ecology
    • /
    • v.9 no.1
    • /
    • pp.79-90
    • /
    • 1986
  • The production and decomposition of litters and nutrient cycling of forests were studied at the pine forests such as Pinus densiflora, Pinus koraiensis, Pinus rigida, Pinus thunbergii, Abies holophylla and Larix kaempfer. The annual litter production of the P. densiflora forest was the most on Mt. Mudeung which was 620.75g/$m^2$ and the least on Mt. Halla which was 155.00g/$m^2$. The decay rate of litters was the highest at the P. densiflora forest on Mt. Mudeung which was k=0.256 and the lowest at the P. densiflora forest on Mt. Halla and A. holophylla on Mt. Jiri which were k=0.099. The half time of decomposition of litters was shortest at the P. densiflora forest on Mt. Mudeung and the longest at the P. densiflora on Mt. Halla and A. holophylla forests on Mt. Jiri. The average decay rate of the L. kaempferi forests which was k=0.204 was the highest and that of the A. holophylla forests which was k=0.122 was the lowest. The decay rate tended to decrease against increasing the altitude. The annual production of litterr, the contents of mineral nutrients and the amounts of mineral nutrients inputted into the forest soil tended to increase in proportion to the decay rate, k.

  • PDF

Wing Design Optimization of a Solar-HALE Aircraft

  • Lim, JaeHoon;Choi, Sun;Shin, SangJoon;Lee, Dong-Ho
    • International Journal of Aeronautical and Space Sciences
    • /
    • v.15 no.3
    • /
    • pp.219-231
    • /
    • 2014
  • We develop a preliminary design optimization procedure in this paper regarding the wing planform in a solar-powered high-altitude long-endurance unmanned aerial vehicle. A high-aspect-ratio wing has been widely adopted in this type of a vehicle, due to both the high lift-to-drag ratio and lightweight design. In the preliminary design, its characteristics need to be addressed correctly, and analyzed in an appropriate manner. In this paper, we use the three-dimensional Euler equation to analyze the wing aerodynamics. We also use an advanced structural modeling approach based on a geometrically exact one-dimensional beam analysis. Regarding the structural integrity of the wing, we determine detailed configuration parameters, specifically the taper ratio and the span length. Next, we conduct a multi-objective optimization scheme based on the response surface method, using the present baseline configuration. We consider the structural integrity as one of the constraints. We reduce the wing weight by approximately 25.3 % from that in the baseline configuration, and also decrease the power required approximately 3.4 %. We confirm that the optimized wing has sufficient flutter margin and improved static longitudinal/directional stability characteristics, as compared to those of the baseline configuration.

Distribution and Habitat Condition of Crypsinus hastatus in Buyeogun (부여군 고란초의 생육지 환경조건과 분포)

  • Song, Hong Seon;Kim, Seong Min
    • Korean Journal of Medicinal Crop Science
    • /
    • v.24 no.1
    • /
    • pp.27-30
    • /
    • 2016
  • Background : This text was conducted to evaluate the distribution, shape characteristics and habitat condition of Crypsinus hastatus in Buyeo Korea. Methods and Results : In Buyeo, Crypsinus hastatus was distributed at an altitude of 31.2 m, a slope of 82.5% and a distance from river water of 27.2 m. The leaf blade was oblong, 2.7 cm long, 1.2 cm wide with a petiole length of 2.3 cm. The total population comprised 2,100 individuals, with the highest proportion being individuals with a leaf blade of length 0.5 - 1 cm. The temperature and light intensity of the growth point were lower, but the humidity higher, than that of growth around. The chemical properties of the soil were as follows: pH 4.42, organic matter 77.99 g/kg, electrical conductivity 0.50 dS/m, nitrate nitrogen 20.50 mg/kg and available phosphate 165.7 mg/kg. Exchangeable cation content of potassium, magnesium, sodium and calcium was 0.35, 0.70, 0.09 and $2.04cmol^+/kg$, respectively. Conclusions : In Buyeo, Crypsinus hastatus was distributed in $5.3m^2$ area of Nakhwaam, Naeseongri and Jeongamri. However, the population of the medicinal resources seemed to decrease owing to the poor environmental conditions of the habitat.

A Study on Defect Diagnostics of Gas-Turbine Engine on Off-Design Condition Using Genetic Algorithms (유전 알고리즘을 이용한 탈 설계 영역에서의 항공기용 가스터빈 엔진 결함 진단)

  • Yong, Min-Chul;Seo, Dong-Hyuck;Choi, Dong-Whan;Roh, Tae-Seong
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.12 no.3
    • /
    • pp.60-67
    • /
    • 2008
  • In this study, the genetic algorithm has been used for the real-time defect diagnosis on the operation of the aircraft gas-turbine engine. The component elements of the gas-turbine engine for consideration of the performance deterioration consist of the compressor, the gas generation turbine and the power turbine. Compared to the on-design point, the teaming data has been increased 200 times in case off-design conditions for the altitude, the flight mach number and the fuel consumption. Therefore, enormous learning time has been required for the satisfied convergence. The optimal division has been proposed for learning time decrease as well as the high accuracy. As results, the RMS errors of the defect diagnosis using the genetic algorithm have been confirmed under 5 %.

Current Status of Invasive Disturbance Species and Its Habitat Characteristics in Urban Forest (도시산림 내 침입교란종 출현현황 및 서식특성 연구)

  • Kim, Eunyoung;Kim, Jiyeon;Song, Wonkyong
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.19 no.3
    • /
    • pp.93-102
    • /
    • 2016
  • An invasive disturbance species has caused harm to biodiversity and ecosystem. To address the issue, identifying the characteristics of a habitat for invasive disturbance species is considered for forest management. This study analyzed a status of plant species by field survey based on belt transect method in the capital areas and established a predictive model for invasive disturbance species by logistic regression. As results of the study, the number of herb, vine, and invasive disturbance species and a canopy cover of tree would decrease from the forest edge to core areas (p<0.001). The predictive model was derived with variables of altitude, Topographic Wetness Index, distance to forest edge, and canopy cover of tree. It can be useful in estimating the presence or absence of species and predicting its spatial distribution. Further studies are needed to identify the pathway of introduction, spread, and possibility of germination for understanding the status of invasive disturbance species in more depth.

Windproof ability of aerodynamic measures to improve the wind environment above a truss girder

  • Wang, Zewen;Tang, Haojun;Li, Yongle;Guo, Junjie;Liu, Zhanhui
    • Wind and Structures
    • /
    • v.32 no.5
    • /
    • pp.423-437
    • /
    • 2021
  • Aerodynamic measures have been widely used for improving the flutter stability of long-span bridges, and this paper focuses their windproof ability to improve the wind environment for vehicles. The whole wind environment around a long-span bridge located in high altitude mountainous areas is first studied. The local wind environment above the deck is then focused by two perspectives. One is the windproof effects of aerodynamic measures, and the other is whether the bridge with aerodynamic measures meets the requirement of flutter stability after installing extra wind barriers in the future. Furthermore, the effects of different wind barriers are analyzed. Results show that aerodynamic measures exert potential effects on the local wind environment, as the vertical stabilizer obviously reduces wind velocities behind it while the closed central slot has limited effects. The suggested aerodynamic measures have the ability to offset the adverse effect of the wind barrier on the flutter stability of the bridge. Behind the wind barrier, wind velocities decrease in general, but in some places incoming flow has to pass through the deck with higher velocities due to the increase in blockage ratio. Further comparison shows that the wind barrier with four bars is optimal.