• Journal of the Korean Society of Combustion
• /
• v.4 no.1
• /
• pp.95-103
• /
• 1999

Experimental study on combustion characteristics of a regenerative combustor has performed. High-temperature air combustion in the regenerative combustor is obtained through heat recovery from exhaust gas flow by porous ceramic materials and through alternation of air flow direction through the combustor. Temperature field, CO and NOx emission with respect to the frequency of alternation are measured. It is found that at initial stage of the alternation, temperature of inlet section of main combustion chamber is increased sharply since both high temperature air preheated by the ceramics and prompt fuel injection results in rapid combustion. Following this initial stage, combustion temperature is reduced as the preheated air temperature is reduced. However peak temperature in the chamber and exhaust gas temperature are decreased as the alternation period is reduced, increased temperature of ceramic is observed. CO and NOx emission with respect to the alternation period is also examined. It is found that there exists a range of optimum alternating period for CO and NOx emission characteristics.

• Geotechnical Engineering
• /
• v.6 no.2
• /
• pp.21-34
• /
• 1990

Laboratory experiments are performed for staple fibre -nonwoven geotextiles which have been widely used in Korea to investigate the filter characteristics of soil/geoteztile system under alternating flow conditions. It is experimentally examined the effects of various design factors such as alternating hydraulic gradient, alternating period, vertical load, gradation and density of foundation soil on the filter structure, vertical permeability and soil retention of soil/geoteztile systems. Based on the experimental results, alternating flow filtration criteria- retention criteria and permeability criteria-for staple fibre-nonwoven geotextiles made in Korea are suggested.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.81-90
• /
• 2016

Different from general operating policies to be applied for controllable queueing models, two of three well-known simple N, T and D operating policies are applied alternatingly to the single server controllable queueing models, so called alternating (NT), (ND) and (TD) policies. For example, the alternating (ND) operating policy is defined as the busy period is initiated by the simple N operating policy first, then the next busy period is initiated by the simple D operating policy and repeats the same sequence after that continuously. Because of newly designed operating policies, important system characteristic such as the expected busy and idle periods, the expected busy cycle, the expected number of customers in the system and so on should be redefined. That is, the expected busy and idle periods are redefined as the sum of the corresponding expected busy periods and idle periods initiated by both one of the two simple operating policies and the remaining simple operating policy, respectively. The expected number of customers in the system is represented by the weighted or pooled average of both expected number of customers in the system when the predetermined two simple operating policies are applied in sequence repeatedly. In particular, the expected number of customers in the system could be used to derive the expected waiting time in the queue or system by applying the famous Little's formulas. Most of such system characteristics derived would play important roles to construct the total cost functions per unit time for determination of the optimal operating policies by defining appropriate cost elements to operate the desired queueing systems.

• Korean journal of applied entomology
• /
• v.26 no.1 s.70
• /
• pp.13-23
• /
• 1987

This study was conducted to know the effects of temperature conditions on the growth and oviposition of the brown planthopper(BPH), Nilaparvata lugens $St{\aa}l$. Results obtained were to predict the timing of the BPH control by measuring population dynamics of the BPH in response to temperature fluctuations upon migration of the insects in paddy fields. Developmental and ovipositional rates under constant and alternating temperature conditions were observed in a plant growth cabinet. Hatchabilities of eggs of the BPH were the highest at $25^{\circ}C$ and were decreased below or above the optimum temperature. Egg periods were the shortest at $27.5^{\circ}C$ and prolonged with decreasing temperature, but retarded at higher temperature above $30^{\circ}C$. Adult emergence rates were the highest at $27.5^{\circ}C$ and reduced with decreasing temperature, and no adult emerged at $32.5^{\circ}C$ and $35^{\circ}C$. Developmental period of nymph was the shortest at both $27.5^{\circ}C$ and $30^{\circ}C$, but extended with decreasing temperature. Female longevity was increased with decreasing temperature and the male longevity was the shortest at $27.5^{\circ}C$. Preoviposition period was the shortest at $32.5^{\circ}C$, but prolonged with decreasing temperature. It was about 6.5 times longer at $17.5^{\circ}C$ than that at $32.5^{\circ}C$. Number of eggs oviposited per female was the greatest at $25^{\circ}C$, but decreased at the temperature below or above the optimum. Under the same total effective day-degrees, hatchabilty at the alternating temperature was about 10% higher than that at the constant temperature but egg period at the alternating temperature was nearly identical as that at the constant. Under the $22^{\circ}C$ condition, emergence rate was about 8% higher at the alternating temperature than that at the constant, however, at the $28^{\circ}C$, the rate was about 8% higher at the constant than that at the alternating. Nymphal period was about $4{\sim}6$ days longer at the alternating temperature than that at the constant. Under the same total effective day-degrees in adult stage, both longevity and oviposition period were longer at alternating temperature than those at the constant. Number of eggs oviposited per female was also higher at the alternating. Longevities of females reared under $28^{\circ}C$ of constant temperature was the longest no matter what temperatures they were exposed after the emergence. This result seems to be indicating that female longevity is greatly influenced by the temperature to which they were exposed durings immature stages. Preoviposition period was affected by the temperature exposed during the nympal and adult stage whereas the number of eggs oviposited was affected by the temperature during the adult stage only. Based on the results from this study, the developmental threshold temperatures seem to be $14.12^{\circ}C$ for eggs, $14.76^{\circ}C$ for nymphs, $9.62^{\circ}C$ for adults, and $15.95^{\circ}C$ for preoviposition period. Estimated values of the total effective temperature for completing each stage were 141.25 day-degrees for eggs, 167.83 day-degrees for nymphs, 349.64 day-degrees for adults, and 58.60 day-degrees for preoviposition.

• Journal of Information Display
• /
• v.2 no.1
• /
• pp.24-33
• /
• 2001

The characteristics of the reset and the address discharges of an alternating current Plasma Display Panel (ac PDP) were studied using 2-dimensional numerical discharge cell simulation. We investigated the wall charge variations during the reset discharge adopting ramping reset pulse and the subsequent addressing discharge. The roles of the ramping reset scheme can be divided into two stages, each electrode gathers wall charges during ramping-up of the initial stage and the built-up wall charges are lost during ramping-down of the later stage. Address discharge does not only change the wall charge distributions on the address and the scan electrodes but also on the sustain electrode. The increase in the wall charges on the sustain electrode was observed with the variation of the applied voltage to the sustain electrode during the address period. The increase of the applied voltage to the sustain electrode during the address period is expected to induce the decrease of the sustain voltage during the display period.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.49-55
• /
• 2007

The quality of chaotic mixing in three-dimensional micro channel flow has been numerically studied using Fractional-step method (FSM) and particle tracking techniques such as $Poincar{\acute{e}}$ section and Lyapunov exponents. The flow was driven by pressure distribution and the chaotic mixing was generated by applying alternating current to electrodes embedded on the bottom wall at a first half period and on the top wall at a second half period. The equations governing the velocity and concentration distributions were solved using FSM based on Finite Volume approach. Results showed that the mixing quality depended significantly on the modulation period. The modulation period for the best mixing performance was determined based on the mixing index for various initial conditions of concentration distribution. The optimal values of modulation period obtained by the particle tracking techniques were compared with those from the solution of concentration distribution equation using FSM and CFX software and the comparison showed their good match.

• Ocean and Polar Research
• /
• v.30 no.1
• /
• pp.11-19
• /
• 2008

Incubation routine and sex role of Streaked Shearwaters Calonectris leucomelas at Sasudo Island, in Jeju, South Korea, were studied during the incubation period, June to August in 2002. Incubation routine in Procellariiformes represents a sequence of alternating shifts taken in turn by female and male in a species-specific pattern. Hence, coordination of individual incubation rhythms between partners is crucial for successful breeding attempt. In Streaked Shearwaters, incubation routine represents a sequence of alternating shifts taken in turn by male and female. The first incubation shift was made by male after female had laid the egg. The mean incubation period was 50.8 days until hatching. Males had spent on average 26.5 days incubating and females 24.3 days accordingly. The mean duration of incubation shifts decreased progressively from 6th and 7th shift to hatching. Overall, males had spent more time incubating than females during the incubation period, but the mean duration of the incubation shift 5.6 days for males and 5.7 days for females did not differ between males and females. There were no effect of the body size of the breeding pair on incubation performance. For males the mean of body weight decreased during the incubation, whereas for females it remained approximately stable. In Streaked Shearwaters, the duration of incubation shift and subsequent foraging trip are related to loss of body weight during the period of fasting. In addition, coordination of individual incubation rhythms affects their incubation behaviour.

• Korean Journal of Weed Science
• /
• v.31 no.1
• /
• pp.78-83
• /
• 2011

This study was conducted to evaluate germination rate of Vicia tetrasperma and V. hirsuta as affected by storage duration, temperature, and light. All seeds of both species were gathered from Dangjin, Chungnam in the late June of 2004 and 2005, stored for a certain period of time, and then exposed for 20 days to the alternating temperatures ($15/^{\circ}C,\;20/10^{\circ}C,\;25/15^{\circ}C$, and $30/20^{\circ}C$) for evaluating the germination rate. Both 2004 and 2005, two species stored at room temperature for 3 months had germination rates less then 30% with applying various alternating temperatures for 20 days although the highest germination rate was obtained with $25/15^{\circ}C$ treatment. V. tetrasperma at 12 month storage after seed gathering in 2005 had 82% of germination rate with $25/15^{\circ}C$ treatment and showed the increased rate as time passed. V. hirsuta at 6, 9, and 12 month storage after seed gathering in 2005 ranged, however, from 33 to 53% of the germination rate at alternating temperature treatments for 20 days and did not seem to be affected by the elapsed time of the storage. Storage at room temperature was more effective for increasing germination rate of both species compared to those of the storage at low temperature. The germination rate of both species was not significantly affected by either exposure of light or short period of high temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.503-506
• /
• 2004

In this paper, we suggest a new driving waveform for stable address discharge in AC PDP without the reduction of contrast ratio. To analyze the influence of cross-talk between discharge and non-discharge cells and verify that proposed waveform shows a stable address discharge, we measured the address discharge delay time. The proposed waveform shows the reduction of the cross-talk and concurrently the improvement of address voltage margin compared with those of selective reset waveform having one reset period in 1TV-Field..

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.621-622
• /
• 2008

This paper deals with the magnetic properties under the rotational magnetic field on the electrical steel sheet by using Single Sheet Tester with two excitation coils. Actually, the magnetic flux of stator cores in running motors have the behaviour of rotating and alternating flux. In order to improve motor characteristics, it is require to estimate these magnetic properties. When the magnetic field vectors are rotating around in the plane of the sheet during one period of cycle, the magnetization properties and the core loss are measured and then, the results are compared with the magnetic properties obtained by the alternating magnetic fields.