• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.985-990
• /
• 2003

With the rotational speed of the hard disk drive (HDD) increased, the low frequency structural vibration induced by the unbalance force gives rise to the structure home noise of the personal computer, and finally degrades the noise quality. As the unbalance of the hard disk drive is decided by the mechanical assembly allowance between clamping and platter disk, there is limit to control this unbalance by the improved assembly method. To improve the noise and vibration performance of PC, basically the unbalance of HDD needs to be measured absolutely and reduced during the stage of the disk assembly. This study introduces the HDD unbalance measurement methods of the absolute magnitude based on the mobility concept, and the unbalance location information with the acceleration orbit.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.323-332
• /
• 1999

The bus should supply an equal service to the whole community as feeder trip. However the existing bus route can not supply an effective feeder service in spite of the changes in the latent demand by the variety of regional structural change. This study aimed to establish the concept which frames the bus operation and management to cope with the latent demand to the bus. This study tackled this evidence by analyzing the transportation problems in terms of the urban growth emphasizing the following issues ; First, the strategy to improve the bus operation Second the land use control appropriate for the public transportation network Third economical range to justify the bus operation Second, the land use control appropriate for the public transportation network Third, economical range to justify the bus operation Fourth, the allowance for the private transportation mode On the latter part, the difference on the bus operation was compared to determine the range within which the bus operation could be justified. This study would provide some implications to improve the management for bus operation and fundamental information to develop the bus operation system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.4
• /
• pp.291-296
• /
• 1995

This study was conducted to determine the influence of alfalfa supplementation on intake, digestibility nitrogen and energy utilization in Korean native goats fed oak browse. This experiment was conducted by total collection method in laboratory, 1994. Diets included 100% oak bmwse(control), 75% oak browse+ 25% alfalfa and 50% oak browse + 50% alfalfa. Alfalfa supplemented diets were slightly higher CP(PO.O5). lignin (P<0.05) and tannin(P<0.05) contents than those control diets. Increasing levels of alfalfa supplementation, dry matter intake slightly increased, but no differences were observed in all diets. Digestibility for dry matter and cellular constituents showed higher for alfalfa supplemented diets than control diets(P<0.05), but NDF and ADF digestibility were similar for all diets. Alfalfa supplemented diets furnished higher dietary N, apparently digested N and retained N than did the control diets(P<0.05). Consumed energy slightly increased with increasing levels of alfalfa supplementation(P>0.05). DE was high(P<0.05) in alfalfa supplemented diets. but ME was similar for all diets. As above results, oak browse diets alone did not supply N and energy in excess of NRC recommended allowance for goats. Hence, goats fed oak browse with supplementation of protein sources such as alfalfa will be need to provides adequate nutrients.

• The Journal of Korean Society for School & Community Health Education
• /
• v.3
• /
• pp.1-13
• /
• 2002

Female university students generally have a lower intake of nutrition compared to other age groups due to their adverse interests in their appearance. Drinking, smoking, too much weight control, accumulation of psychological and physical stress are causes of inadequate diet. The result is deterioration of hair health. Establishment of good diet and hair care is the foundation of a healthy hair in adulthood. For this reason, there is a great need for a healthy hair care. The data from a questionnaire survey was analyzed with 800 female undergraduate students responding. Seventeen universities were included in the study, 8 of which were from Seoul, 6 from other large cities and 3 from smaller towns. The objective of this study is to investigate the correlations of these factors and to provide preliminary data for developing an effective hair care education program. Results include the following: 1. Knowledge score of hair care based on general characteristics were higher for students in larger cites compare to small cites or regions. Also, students in higher academic year, more allowance, interest in their apparence and family income showed higher knowledge in this field. These factors had meaningful effect on the statistics of this study. 2. Attitude score towards hair care based on general characteristics were higher for students in larger cites compare to small cites or regions. Also, students in higher academic year, more allowance, interest in their apparence and family income showed higher knowledge in this field. These factors had meaningful effect on the statistics of this study. 3. Behavior score towards hair care was higher for students with greater family income, allowance, interest in appearance. These factors had meaningful effect on the statistics of this study. 4. The correlation study between knowledge, attitude and behavior showed that higher the knowledge and attitude, better the behavior. 5. The analysis of factors effecting hair care behavior showed that interest in health, acknowledgement of current hair condition, total family income were a viable factor in predicting hair care behavior. The predictability of regression model is 38.9 %($R^2$) Therefore, in order to maximize the hair care behavior, consistent and systematic study should be earned out to develope an effective education program to improve health interest.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.123-130
• /
• 2016

With the development of fast construction mode in shipbuilding market, the demand on accuracy management of hull is becoming higher and higher in shipbuilding industry. In order to enhance production efficiency and reduce manufacturing cycle time in shipbuilding industry, it is important for shipyards to have the accuracy of ship components evaluated efficiently during the whole manufacturing cycle time. In accurate shipbuilding process, block accuracy is the key part, which has significant meaning in shortening the period of shipbuilding process, decreasing cost and improving the quality of ship. The key of block accuracy control is to create a integrate block accuracy controlling system, which makes great sense in implementing comprehensive accuracy controlling, increasing block accuracy, standardization of proceeding of accuracy controlling, realizing "zero-defect transferring" and advancing non-allowance shipbuilding. Generally, managers of accuracy control measure the vital points at section surface of block by using the heavy total station, which is inconvenient and time-consuming for measurement of vital points. In this paper, a new measurement method based on point clouds technique has been proposed. This method is to measure the 3D coordinates values of vital points at section surface of block by using 3D scanner, and then compare the measured point with design point based on ICP algorithm which has an allowable error check process that makes sure that whether or not the error between design point and measured point is within the margin of error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.719-726
• /
• 2008

In this thesis investigate the security gateway that manage authorization for user access dynamically by recognizing automatically and comparison & distinction between database and User-information while a terminal unit(PC) trying to access to the network of subnet. Also, it present User-interfaced authorization allowance role model, so administrator can assign united access control between network level(L2) and application level(L7) in relation to system construction.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1663-1666
• /
• 2003

TMA clathrate that is used by PCM of ice storage system in this research creates hydrate crystallization at higher temperature than pure water, and application is expected as PCM because having comparative big dormant temperature without phase separation phenomenon. In case this research uses TMA clathrate by PCM, choose admixture by purpose to control or remove subcooling of TMA clathrate and evaluated experimentally. Subcooling is improved and can expect contraction of freezing machine running time and increase of coefficient of performance as that add admixture to TMA clathrate conclusively. Also, may supply thermal storage system that apply low temperature potential heat thermal storage material that subcooling is improved more extensively laying stress on medium size building and small size building, can expect allowance through localization of ice storage system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.340.1-340
• /
• 2002

The unbalance exciting force induced by HDD of lately getting higher speed is directly influenced by the rotational speed and the mechanical assembly allowance between disk and spindle motor, and which gives rise to the structure borne noise of the personal computer. The absolute unbalance mass of HDD needs to be measured and adjusted by the counter mass to control the unbalance exciting force effectively in the stage of assembling the disk and spindle motor. This study introduces the measurement methods of the magnitude of the absolute unbalance mass and the position of HDD by 2 accelerometers. The absolute unbalance mass can be obtained by the acceleration responses and the mobility of the mechanical part, while the position of the unbalance mass can e obtained by the rotation acceleration orbit.

• Explosives and Blasting
• /
• v.8 no.4
• /
• pp.3-22
• /
• 1990

The $\varphi{4.5}$ meters pilot tunneling work is almost done to the $\varphi{11.3}$ meters twin tunnel of NAM SAN No1. The south side pit of 400 meters is weak zone of Rock status, so client request us to allow the cautious blasting pattern for drilling on the condition of 0.2 kine vibration allowance limited for the safety of side running tunnel. The pattern of cautious blasting carried out by 6 time divided fiving on the round drilling depth of 1.20 meters(1.10) and also applied control blasting method with line drilling due to the reduction of vibration.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.967-975
• /
• 2009

In order to control differential settlement and to secure the safety of super structure on a high rock embankment the designed static compaction is changed with dynamic compaction and piled raft method. The parameters for dynamic compaction design are obtained from a pilot test. In addition, numerical analyses are also carried out to figure out the length and quantity of piled raft that can restraint the differential settlement within allowance range.