• 제목/요약/키워드: Allowable tractive force

검색결과 5건 처리시간 0.114초

타이어공기압에 따른 트랙터의 견인성능과 토양다짐 (The Effect of Tire Inflation Pressure on Soil Compaction and Tractive Performance of Tractor)

  • 박원엽;이규승
    • Journal of Biosystems Engineering
    • /
    • 제27권6호
    • /
    • pp.491-500
    • /
    • 2002
  • This study was carried out to investigate experimentally the effect of the tire inflation pressure of a tractor on soil compaction and tractive performance. Two kinds of field experiments were conducted using an agricultural tractor. One experiment is concerned with the tractive performance of the tractor at the three levels of tire inflation pressure; 50kpa, 100kpa and 200kpa, and the other one is about the soil compaction at the four levels of tire inflation pressure; 50kpa, 100kpa, 150kpa and 200kpa, at three different numbers of passes; 1, 3 and 5 passes. From the results of the field experiment, it was found that decreasing the tire inflation pressure decreased the motion resistance of tractor and increased the tractive force and tractive efficiency. The tractive and working performance of the tractor could be improved by the reduction of tire inflation pressure. Increasing the inflation pressure and the number of passes increased the soil compaction. Rate of compaction increased rapidly at the first pass and declined at subsequent passes. To reduce the effect of soil compaction for the whole field, it is recommended that tractor should follow the rut of the first pass from the subsequent passes, and decrease the inflation pressure of the driving tires up to allowable minimum level.

식생강화를 위한 다공성 소일 블록의 치수안정성 해석 (Analysis on Dimensional Stability of Porosity Soil Block for Vegetation Reinforcement)

  • 박상우;안태진;안상호;권순현
    • 한국습지학회지
    • /
    • 제15권1호
    • /
    • pp.91-103
    • /
    • 2013
  • 본 연구에서는 자연친화적인 호안 블록의 현장 적용시 충분한 기술적인 검증과 구조적, 수리학적 안정성 검토 등이 제대로 이루어지지 않고 있는 문제점을 개선하기 위해 생태적 기능을 확보할 수 있는 식생강화를 위한 다공성 소일 블록에 대하여 수리적 거동 변화에 따른 수리학적 안정성을 검토하였다. 대상구간을 선정하여 수치해석 및 수리모형실험을 실시하였으며 수치해석을 위해 1차원 수치해석모형인 HEC-RAS와 2차원 수치해석모형인 RMA-2를 이용하여 1, 2차원 수치해석을 실시하였고, Froude 상사법칙을 적용하여 식생 유, 무에 따른 축척된 수리모형실험을 실시하였다. 수리모형실험의 경우 실험결과에 대한 타당성을 위해 축척된 수리모형실험의 유속 및 소류력 결과를 원형으로 환산하여 1, 2차원 수치해석결과와 동일한 조건하에 비교 검토하였고 그 결과 비교적 일치된 결과가 나타난 것으로 확인되었으며 이에 따른 원형으로 환산된 소류력 결과를 기존 연구결과인 호안의 허용소류력과 비교함으로써 블록의 수리학적 안정성을 제시하였다.

수리모형을 이용한 호안녹화기반재의 수리적 안정성 분석 (Stability Analysis of Green Revetment Media Using Hydraulic Model)

  • 권효진;김성희;구본학
    • 한국환경복원기술학회지
    • /
    • 제16권4호
    • /
    • pp.15-26
    • /
    • 2013
  • In recent years, river maintenance projects using natural methods have been continuously implemented in urban areas and methods emphasizing ecology are being developed and constructed in revetment areas. However, there is insufficient technical review on the hydraulic stability of those revetment methods during the event of flood. Therefore, a hydraulic analysis is necessary for the stream where revetments are applied. This study was conducted to develop an objective test method for the hydraulic stability of green revetment media. For this purpose, hydraulic model tests were performed for the green base materials for revetments. Tests were conducted using experimental devices for the hydraulic model which were installed to simulate the rapid current during the flood. Loss of soil by the hydraulic condition was compared and analyzed with that of dry green revetment media, and the evaluations were made on the corrosion resistance, tractive force, and contractile force. Test results showed that green revetment media had higher corrosion resistance in non-vegetation condition compared to dry green revetment media, and the loss of base materials by the rooting of vegetation showed significant reduction by the vegetation. In addition, results of the allowable tractive force of the base material indicated it is relatively stable in vegetation condition but scouring can occur in non-vegetation condition. Therefore, the development of vegetation in revetment areas is anticipated to be effective for the stability of revetment areas by reducing external forces interacting with the corrosion resistance and stream bank. The green revetment media in expected to contribute to the stability of revetment areas.

초기기동시 추진력과 제동력 관계에 대한 고찰 (Discussion of the relationship between tractive power and braking power in initial time)

  • 이기식;한성호;정권일
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2009년도 춘계학술대회 논문집
    • /
    • pp.1643-1648
    • /
    • 2009
  • The braking system of train must posses the large baking effort in order to stop the train safety within the limited traveling distance. but, the excessive braking effort has been deteriorated the ride comfort due to high level of deceleration and jerk, and sometimes occurred the skid. because the applied braking force exceeds the allowable adhesive force. this skid causes not only to increase the a stopping distance but also to deteriorate the safety of train and damage the rall surface by wheel flat. In the present paper, braking force for disk brake of Tilting Train eXpress(TTX) was measured though on convention line test and the traction force was estimated by using the analytic model in skid condition. also, we have discussed the relationship between the bake force and traction force in starting condition.

  • PDF

Polypropylene Mat에 의(依)한 용수로(用水路)의 누수방지(漏水防止)에 관(關)한 연구(硏究) (A Study on the Leakage Protection with Polypropylene Mat in Irrigation Canal)

  • 강신업;강예묵;조성섭
    • 농업과학연구
    • /
    • 제6권2호
    • /
    • pp.166-184
    • /
    • 1979
  • Dam에 저수(貯水)한 물이 흙수로(水路)에 의(依)해서 도수(導水)되는 과정(過程)에서 많은 손실(損失)을 보게 된다. 특(特)히 이들 용수로(用水路)가 사력층(砂礫層)과 같은 투수성지반(透水性地盤)을 통과(通過)할 때 용수로(用水路)의 누수방지(漏水防止)를 위(爲)해서 Lining을 실시(實施)하여 왔다. 이들 용수로(用水路)의 누수방지(漏水防止)를 위(爲)한 Lining 방법(方法)은 많은 연구(硏究)가 계속(繼續)되어 왔고 최근(最近)에는 plastic film 혹은 polyethylene film 등(等)으로 Lining 하는 방법(方法)이 고안(考案)되어 연구(硏究)하고 있다. 그러나 이들 재료(材料)는 강도(强度)가 약(弱)하여 파손(破損)될 위험성(危險性)이 있고 또 모래나 자갈 입자(粒子)와 접촉(接觸)하면 pin-hole이 생겨서 누수(漏水)하게 된다. 본(本)연구(硏究)에서는 이와 같은 흠점(欠點)을 보완(補完)하기 위(爲)하여 polypropylene mat에 vinyl을 coating해서 매설(埋設) Lining하는 방법(方法)을 시험(試驗)하였다. Polypropylene mat 매설(埋設) 혹은 노출(露出)에 따르는 내구성(耐久性)의 변화(變化), Asphalt 부착부(附着部)의 내구성(耐久性) 및 동해(凍害) 등(等)은 장기간(長期間)의 시험(試驗)이 필요(必要)하므로 아직도 미비(未備)된 점(點)이 있으나 본시험(本試驗)에서 얻은 결과(結果)를 요약(要約)하면 다음과 같다. 1. 수로(水路)의 저면(底面)과 양측사면(兩側斜面)의 연결부(連結部)는 곡선(曲線)으로 설치(設置)하는 것이 사면(斜面)의 안정도(安定度)가 크고 공사비(工事費)가 절약(節約)된다. 곡급부(曲級部)의 곡율변화(曲率變化)와 polypropylene mat의 감소량(減少量) 및 절토(切土)의 감소량(減少量)과의 관계(關係)를 사면(斜面)의 경사(傾斜)로 유도(誘導)해서 그림 7~그림 9에 표시(表示)하였다. 2. Polypropylene mat의 보호(保護)를 위(爲)해서 피복재료(被覆材料)를 덮어야 하고 이 두께는 수심(水深), 사면(斜面)의 안정(安定), 수로내((水路內) 침전물(沈澱物)의 제거작업(除去作業), 통행(通行), 비관개기(非灌漑期)의 back pressure 등(等)을 고려(考慮)해서 30cm 이상(以上)으로 함이 바람직하다. 3. 피복재료(被覆材料)는 사면침식(斜面侵蝕)을 방지(防止)하기 위(爲)해서 모래질(質)흙은 속에 넣고 표면(表面)은 조립질(粗粒質)의 자갈을 덮는 것이 수로사면(水路斜面)의 안정(安定)을 위(爲)해서도 좋을 것이다. 4. 용수로(用水路)의 사면안정검토(斜面安定檢討)는 수로저면(水路底面)의 수동부(受動部)를 고려(考慮)함이 타당(妥當)하고 사면안정(斜面安定), 허용유속(許容流速) 및 소유력(掃流力)을 고려(考慮)해서 1 : 2정도(程度)의 경사(傾斜)로 설치(設置)함이 바람직하다. 5. Earth Lining의 공사비(工事費)와 비재(比載)할 때 Vinyl로 coating 한 polypropylene mat의 Linging은 흙의 운반거리(運搬距離) 500m 일 때는 28%, 700m 일 때는 37%의 공사비(工事費)를 절약(節約)할 수 있다. 6. Vinyl로 coating 한 'polypropylene mat로 Lining 하면 거의 완벽(完壁)할 정도(程度)로 누수(漏水)를 방지(防止)할 수 있으나 Asphalt로 접합(接合)시켰을 때 polypropylene mat의 강도(强度)에 변화(變化)가 오는 것이 예상(豫想)되므로 경과시간(經過時間)에 따르는 강도변화(强度變化)는 계속(繼續)해서 연구(硏究)해야 할 것으로 생각된다.

  • PDF