• 한국지반공학회논문집
• /
• 제28권4호
• /
• pp.43-53
• /
• 2012

경량기포토의 현장 적용에 있어 많은 요인들이 문제를 유발시킬 수 있다. 특히 온도가 경량기포토의 거동이나 강도에 상당한 영향을 미칠 수 있으나 아직까지 이에 대한 연구가 미흡한 실정이다. 따라서 본 연구에서는 현장에서 가장많이 적용되고 있는 6, 8, 10kN/$m^3$ 3가지 단위중량으로 경량기포토 공시체를 제작하여 한국의 기온 특성에 맞는 다양한 온도에서 양생시켰다. 준비된 공시체에 대해 일축압축강도시험을 실시하고, 침하거동도 같이 관찰하였다. 양생온도에 따른 경량기포토내의 공기방울의 형태 변화를 알아보기 위해 SEM을 이용한 사진촬영도 이루어졌다. 그 결과 강도, 침하, 공기방울형성 등 경량기포토의 특성에 양생온도가 영향을 미침을 확인하였다. 마지막으로 본 연구결과를 바탕으로 경량기포토의 품질을 확보할 수 있는 허용양생온도 $8^{\circ}C{\sim}25^{\circ}C$가 제안되었다.

• 한국농공학회지
• /
• 제16권4호
• /
• pp.3545-3554
• /
• 1974

The objective of this study was to investigate the characteristics of the evaporation rate, the plastic shrinkage and the compressive strength of concrete exposed to a rapid evaporation environment immediately after casting. Drying of concrete were conducted under a controlled chamber in which the temperature was mainfoimed at 30 ${\pm}$1$^{\circ}C$, the relative humidity 22 ${\pm}$1 percent, and the wind velocity 7 ${\pm}$1 m/sec. The compressive strength of concrete was tested after 28 days of standard curing. The results obtained are as follows: 1. The evaporation rate was the highest at the very beginning, was decreased as the drying progresses, and was kept almost constant after 6 hours. 2. The shrinkage of concrete was changed in three different rates for the concrete mixture having its slump vallue between 3.0cm and 7.5cm. 3. The plastic shrinkage was ended within 5 or 6 hours after casting, regardless of the water cement ratio. 4. The shrinkage was increased within the limit of slump values between 3.0cm and 7.5cm as the water-cement ratio was increased. 5. The evaporation was kept on even after the plastic shrinkage was ended. 6. Within the limit of good workability (slump value between 4.5cm and 7.5cm), the compressive strength of concrete was increased when the shrinkage rate was slow but it was decreased when the rate was rapid 7. From the result of this study it is recommended that (1) the water-cement ratio should be less as long as the workability of concrete is allowable; (2) the evaporation should be prevented at least for 4 hours after casting concrete.