• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.110-116
• /
• 2002

Here are shown on stress and vibration evaluations and application of piping system in petrochemical plant with and actual example. While stress evaluation by thermal growth has no argument on the calculated results, vibrational evaluations have some different results in accordance with the evaluation methods. In case of the static stress evaluation the ASME B3l.3 code defines 7000 cycles of fatigue lift: in operating the piping system with a design condition. However, the method of vibrational evaluation on piping systems in petrochemical plants has not been established clearly, yet. In this stuffy, it is purposed to present the requirement of a vibrational evaluation method for petrochemical plant piping system, with an actual application.

• Journal of Biosystems Engineering
• /
• 제36권1호
• /
• pp.1-8
• /
• 2011

Six models of operator seat supplied to local tractor manufacturers were tested in the laboratory in accordance with ISO 5007 and 78/764/EEC. No models out of the six met the allowable damping and transmissibility performance criteria of both ISO 5007 and 78/764/EEC. From the ISO criterion standpoint, one model failed in damping performance and 4 models in isolation performance. From the 78/764/EEC criterion standpoint, 4 models failed in damping performance and 4 models in isolation performance. However none of them failed in all of the criteria, either. Each model met the one acceptance criterion but failed in another. This indicated that operator seat must be improved to meet the current ISO 5007 or 78/764/EEC and the exposure limit value that will be enforced in EU tractor market from 2014 by EU Directive 2002/44 EC.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.129-133
• /
• 2008

As a rotating machine element, plastic gears are more and more widely used in such as industrial machine element, since plastic gear is lighter, higher wear-resistance, and higher vibration absorbing ability than metal gears. When operating plastic parts, tooth breakage and fatigue life shortened due to increasing number of applying load and tooth flank temperature rising, such that accuracy of plastic gears is divided from allowable range to cause vibration and noise. On this study, a internal plastic gears are developed which improved the filling balance molding process by a new injection mold structure. The new mold structure called HR3P(hot runner type 3plate mold). As the result from this studies, we obtained a very accurate roundness internal gears by using design of experiment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.107-113
• /
• 2003

This research is to investigate the performance of a flexible matrix composite driveshaft with respect to shaft design parameters such as the number of layers, ply orientations, and material properties. A finite element formulation is utilized to estimate the allowable misalignment under given driving torque, the maximum temperature at steady states, and external damping for ensuring whirling stability under supercritical speed. Results indicate that the system performance can be greatly affected by the shaft laminate parameters, especially the ply orientations. Several sets of shaft parameters that will provide satisfactory overall system performance are derived.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.790-795
• /
• 2004

The characteristics of refrigerator noise recorded in anechoic chamber was investigated in condition of a the real living room and a kitchen. To predict the noise propagation in an apartment unit, room acoustic simulation software was used. It was found that the noise level in the real living room was $4\sim8dB$ higher than in the anechoic chamber. When a noise barrier and absorption materials were used on the rear wall and floor, the noise level reduced up to $3\sim4dB$. In addition, when the subjective evaluation of auralized refrigerator noise was undertaken using headphone, it was revealed that 21dB (A) is the allowable sound pressure level of 95% satisfaction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.50-57
• /
• 1997

A 600HP class high-speed gear driven 3-stage turbo-compressor (IGCC : Integrally Geared Centrifugal Compressor) driven by a 3600 rpm AC induction motor has been designed, of which low speed pinion runs at 35000 rpm and high speed pinion at 50000 rpm nominally. Due to its high speed operation, the system requires very reliable bearing selection and design as well as accurate rotordynamic analysis and prediction of its dynamic behavior to secure the operating reliability. Rotordaynamic analyses of the IGCC rotor-bearing system predicted that the low speed pinion rotor mounted on 5-pad tilting pad bearings has two critical speeds before its design speed and high speed pinion rotor only one critical speed, and estimated critical speeds of both pinion shafts are away from the continuous operating speed enough to satisfy the corresponding API requirement. The forced response analysis with API specified maximum allowable unbalances also showed that unbalance responses are small enough for smooth operation of the system.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.169-174
• /
• 2005

Current information storage devices read/write data on the rotating disk. The axial vibration of a rotating disk should be suppressed for the successful operation of the device. Information storage devices widely used in these days adopt relatively thick disk which is stiff enough to suppress axial vibration under allowable limit. However, the thickness of the disk is going to be thinner and thinner as the small form factor of the devices is getting preferred by the consumer. In this study, a stabilizer system, which is composed with 8 air bearings, is proposed for suppressing the axial vibration of a $95{\mu}m$ thick PC disk in a non-contacting manner. The performance of the stabilizer system is simulated by numerical computation and then confirmed its results through a series of experiment. A thin and flexible disk has various vibration modes when it rotates in high speed. The stabilizer system generates positive as well as negative pressure due to the rotation of flexible disk so that the force due to the pressure distribution pushes and pulls rotating disk in a non-contacting manner. The balance between positive and negative pressure forces can be obtained by adjusting the area and the slope of the air bearing surface. The axial vibration of the flexible disk of 120mm diameter is suppressed successfully from over $1000{\mu}m$ to $30{\mu}m$ peak-to-peak value at the rotational speed of 5,000rpm.

• 화약ㆍ발파
• /
• 제27권2호
• /
• pp.48-55
• /
• 2009

지진 발생시 진앙 추적에 필요한 지각구조 특성 규명과정에서는 인공지진을 발생시킬 필요가 있다. 이런 정도의 큰 지반진동은 대규모 시추공 발파를 통해 발생시킬 수 있으나 이와 같은 대규모 발파는 대부분 주변에 대한 환경적인 악영향을 미치게 된다. 이런 맥락에서 시추공 시험발파를 통해 발파장소 주변의 다양한 구조물에 영향이 없는 최대 장약량을 결정하였다. 시험발파에서는 젤라틴 다이너마이트 400kg을 사용하였다. 시험 결과 측정된 자료로부터 지반진동 수준에 대한 예측식을 유도하였다. 주거용 구조물에 대한 지반진동 허용수준을 3.0mm/s로 설정하였을 때 발파장소 부근의 군용 구조물을 고려한 경우에는 사용 가능한 최대 장약량이 677kg으로 나타났다. 하지만 군용건물들을 고려하지 않고 인근부락의 오래된 건물들을 기준으로 할 때는 최대 2100kg의 폭약을 사용할 수 있는 것으로 나타났다.

• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.541-547
• /
• 2022

Before making a prototype, we predicted the inlet/outlet differential pressure and flow coefficient, which are the most basic design data for the valve through the design and numerical analysis of the trim, which is the most important in the localization development of the 1500Ib high differential pressure control valve used for boiler feed water. As a result, the design value and the analysis value were found to be about 98% similar. The flow field within the fluid velocity of 23m/s to prevent cavitation was also found. The result of the numerical analysis on thermal stress due to the characteristics of valves exposed to high temperatures showed that it was found to be about 18% less than the allowable stress of the bolt fixing the trim. When all loads such as pressure, self-weight, and vibration are applied, however, it is judged to go beyond the currently calculated thermal stress, exceeding the allowable stress.

• 대한기계학회논문집A
• /
• 제40권11호
• /
• pp.963-970
• /
• 2016

본 연구는 가속페달에 반력을 생성하여 운전자의 경제운전을 유도하기 위한 에코페달의 설계와 성능 검증을 다룬다. 에코페달의 제어로직은 사전에 설정된 "허용가속도"를 바탕으로 현재 속도에서 허용되는 연료소비량을 정하고 이를 실제 연료소비량과 비교하여 에코페달의 작동을 결정하는 방식을 제안하였다. 폐달 반력은 운전자가 충분히 인지하되 불쾌감을 느끼지 않아야 하며, 차량의 정상 거동에 간섭이 없어야 한다. 스텝형과 램프형 반력 등과 같이 페달 답력이 급속하게 증가하는 형태의 반력은 반력 작동이 멈춘 직 후 운전자의 답력에 의한 급작스러운 가속 현상 때문에 적용이 어렵고, 이러한 문제가 없는 진동형 반력을 채택하였다. 진동형 반력의 주파수, 진폭, 작동시간은 운전자의 주관적 평가와 연비 향상 효과를 고려하여 결정하였다. 본 연구에서 제안된 에코페달을 차량에 장착하여 주행시험을 실시한 결과 고속도로와 시내주행에서 각각 13%와 15%의 연비향상 효과를 보여주었다.