• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.929-935
• /
• 2008

As internet telephony services based on Session initiation Protocol (SIP) enter the spotlight as marketable technology, many products based on SIPs have been developed and utilized for home and office telephony services. The call connection of an internet phone is classified into specific call connections and group call connections. Group call connections have a forking function which delivers the message to all of the group members. This function requires excessive message control for a call connection and creates heavy traffic in the network. In the internet cail system model. most of the call-setup messages are directed to the proxy server during a short time period. This heavy message load brings an unwanted delay in message processing and. as a result, call setup can not be made. To solve the delay problem, we simplified the analysis of the call-setup message in the proxy server, and processed the forking function distributed for the group call-setup message. In this thesis, a new system model to minimize the load is proposed and the subsequent implementation of this model demonstrates the performance improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7B
• /
• pp.706-718
• /
• 2002

In bluetooth system, there are two kinds of interference. One is the frequency static interference, for example 802.11 direct sequence, the interferer uses fixed frequency band. Another is frequency dynamic interference, for example other piconets or 802.11 frequency hopping, the interferer uses dynamic frequency channel and cant be estimated. In this paper we introduce a novel solution of hybrid method of Listen-Before-Talk (LBT) and Adaptive Frequency Hopping (AFH) to address the coexistence of bluetooth and Direct Sequence of wireless local area network (WLAN). Before any bluetooth packet transmission, in the turn around time of the current slot, both the sender and receiver sense the channel whether there is any transmission going on or not. If the channel is busy, packet transmission is withdrawn until another chance. This is the LBT in Bluetooth. Because of asymmetry sense ability of WLAN and bluetooth, AFH is introduced to combat the left front-edge packet collisions. In monitor period of AFH, LBT is performed to label the channels with static interference. Then, all the labeled noisy channels are not used in the followed bluetooth frequency hopping. In this way, both the frequency dynamic and frequency static interference are effectively mitigated. We evaluate the solution through packet collision analysis and a detail realistic simulation with IP traffic. It turns out that the hybrid method can combat both the frequency dynamic and frequency static interference. The packet collision analysis shows it almost doubles the maximal system aggregate throughput. The realistic simulation shows it has the least packet loss.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.317-320
• /
• 2016

The NH-NongHyup network and servers were paralyzed in 2011, in the 2013 3.20 cyber attack happened and Classified documents of Korea Hydro & Nuclear Power Co. Ltd were leaked on December in 2015. All of them were conducted by a foreign country. These attacks were planned for a long time compared to the script kids attacks and the techniques used were very complex and sophisticated. However, no successful solution has been implemented to defend an APT attack thus far. Therefore, we will use big data analytics to analyze whether or not APT attack has occurred in order to defend against the manipulative attackers. This research is based on the data collected through ISAC monitoring among 3 hierarchical Korean defense system. First, we will introduce related research about big data analytics and machine learning. Then, we design two big data analytics models to detect an APT attack and evaluate the models' accuracy and other results. Lastly, we will present an effective response method to address a detected APT attack.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.707-714
• /
• 2013

IoT, which can be regarded as an enhanced version of M2M communication technology, was proposed to realize intelligent thing to thing communications by utilizing Internet connectivity. Things in IoT are generally heterogeneous and resource constrained. Also such things are connected with each other over LLN(low power and lossy Network). Confidentiality, mutual authentication and message origin authentication are required to make a secure service in IoT. Security protocols used in traditional IP Networks cannot be directly adopted to resource constrained devices in IoT. Under the respect, a IETF standard group proposes to use lightweight version of DTLS protocol for supporting security services in IoT environments. However, the protocol can not cover up all of very constrained devices. To solve the problem, we propose a scheme which tends to support mutual authentication and session key agreement between devices that contain only a single crypto primitive module such as hash function or cipher function because of resource constrained property. The proposed scheme enhances performance by pre-computing a session key and is able to defend various attacks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.277-284
• /
• 2009

With significant development in wireless communication technologies, the needs to handover from one network to another have grown dramatically. Recently IETF developed MIPv6 and FMIPv6 which are used to handover between different access networks. These handover mechanisms have some known weaknesses. MIPv6 can not serve time-critical application because it causes long handover latency and packet loss. By these reasons, MIPv6 does not guarantee session continuity. FMIPv6 uses handover preparation phase to reduce DAD latency. However FMIPv66 still suffers from long handover latency, because it must perform binding update at the end of handover procedure. In this paper we propose new handover mechanism FMIPv6-PBU which eliminates binding update latency. The proposed mechanism has compatability with lagacy FMIPv6. In this paper propose FMIPv6-PBU handover procedure and explain its procedures and evaluate it with MIPv6 and FMIPv6.

• Journal of the Korean Society of Radiology
• /
• v.6 no.2
• /
• pp.143-149
• /
• 2012

Today each hospital is trend that change rapidly by up to date, digitization and introducing newest medical treatment equipment. So, we introduce new CR system and supplement film system's shortcoming and PACS, EMR, RTP system's network that is using in hospital harmoniously and accomplish quality improvement of medical treatment and service elevation about business efficiency enlargement and patient Accordingly, we wish to introduce our case that integrate reflex that happen with radiation oncology here upon to PACS using CR system and estimate the availability. We measured that is Gantry, Collimator Star Shot, Light vs. Radiation, HDR QA(Dwell position accuracy) with Medical LINAC(MEVATRON-MX) Then, PACS was implemented on the digital images on the monitor that can be confirmed through the QA. Also, for cooperation with OCS system that is using from present source and impose code that need in treatment in each treatment, did so that Order that connect to network, input to CR may appear, did so that can solve support data mistake (active Pinacle's case supports DICOM3 file from present source but PACS does not support DICOM3 files.) of Pinacle and PACS that is Planning System and look at Planning premier in PACS. All image and data constructed integration to PACS as can refer and conduct premier in Hospital anywhere using CR system. Use Dosimetry IP in Filmless environment and QA's trial such as Light/Radition field size correspondence, gantry rotation axis' accuracy, collimator rotation axis' accuracy, brachy therapy's Dwell position check is available. Business efficiency by decrease and so on of unnecessary human strength consumption was augmented accordingly with session shortening as that integrate premier that is neted with radiation oncology using CR system to PACS. and for the future patient information security is essential.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.1
• /
• pp.6-25
• /
• 2002

In this paper, we have implemented UPnP Devices which emulate a Control Point, a Light Controller, and a Digital TV. The Control Point has been developed on Linux host system by using C language. The UPnP Devices emulating the Digital TV and Light Controller are running on embedded linux developer board. For the development of UPnP Devices, UPnP SDK API Vl.04 made by Intel Co. Ltd. has been ported on Assabet Linux Reference board to implement the UPnP protocol. After we analyze and design some services of Digital TV device, we have applied UPnP Device program to those devices. UPnP SDK vl .04 consists of APIs which support HTTP, SSDP, SOAP, GENA and XML DOM Level-1 that are cores of UPnP protocol. The C program written for the UPnP Control Point has been compiled and executed on Linux-based PC. The embedded system running on Embedded Linux OS has been connected all together through Ethernet which allows IP-based communications. Under this environment, the UPnP programs are being executed on each device. Control Point, when in operational mode, discovers UPnP Devices on the network and displays the device list on the consol. By selecting one of the functionalities of the device services that are displayed on the Control Point, the controllability has been accomplished. The experiment that we performed in this thesis have revealed that the Control Point and UPnP Devices have supported the protocols including SSDP, SOAP, GENA, and DHCP.