• 한국결정성장학회지
• /
• 제26권6호
• /
• pp.238-242
• /
• 2016

알칼리(토)금속이 SCR(Selective Catalytic Reduction) 촉매 비활성화에 미치는영향을 미세구조, 촉매 비표면적, 기공 부피 변화, 탈질 성능 분석을 통해 규명하였다. 신촉매를 $350^{\circ}C$에서 6시간 동안 $H_3PO_4$, $K_2CO_3$, $Na_2CO_3$, $Ca(CH_3COO)_2{\cdot}H_2O$, $C_4H_6MgO_4{\cdot}4H_2O$ 수용액을 분사 시켜, 모사 피독된 SCR 촉매를 제조하였다. 피독 촉매 표면의 미세구조는 신촉매와 거의 유사한 형태를 보이지만, 비표면적과 기공 부피 변화를 신촉매와 비교하였을 때, Na < Mg < K < Ca < P 순으로 감소하는 것으로 나타났다. 특히 Na에 의해 피독된 촉매는 비표면적은 $10.20m^2/g$, 기공부피는 $0.061cm^2/g$ 정도 감소하였다. $150{\sim}450^{\circ}C$에서 신촉매 및 피독 촉매의 탈질성능을 평가한 결과, 알칼리 금속(K, Na)에 피독된 SCR 촉매가 가장 낮은 탈질효율을 보였으며, 알칼리 토금속(Ca, Mg)에 피독된 SCR 촉매는 알칼리 금속(K, Na)에 피독된 촉매에 비해 상대적으로 높은 탈질 효율을 보였으며, 인(P)에 의해 피독된 촉매는 SCR 신촉매와 거의 유사한 탈질 성능을 나타내는 것을 확인하였다. 이러한 결과는 SCR 촉매 비표면적이나 기공 부피 감소에 따른 물리적인 비활성화가 SCR 촉매 탈질 성능에 영향을 미치는 것으로 보인다.

• 대한화학회지
• /
• 제42권6호
• /
• pp.696-702
• /
• 1998

황피독에 저항성을 가지는 수성가스 전환반응용 CoMo 계열 촉매에 알칼리금속염 첨가가 반응활성에 미치는 영향에 대하여 연구하였다. 알칼리금속염의 음이온과 양이온의 각각에 대한 영향을 알아보기 위하여 크게 두 경우로 나누어 촉매를 제조하였다. 그 하나는, 양이온을 K로 고정시키고 음이온을 변형시킨 경우로서, 반응활성의 변화는 BET 표면적의 변화로 설명되었다. 다른 한 경우는, 음이온을 $NO_3^-$로 고정시키고 알칼리금속 이온을 변형시킨 경우로서, Li가 첨가된 촉매의 활성이 가장 뛰어났으며 다른 양이온의 경우에는 서로 비슷한 낮은 활성을 보였다. 알칼리금속의 첨가량의 변화에 따른 BET 표면적의 변화와 반응활성의 변화가 같은 경향을 보였다. 알칼리금속염의 양이온을 변화시킨 경우에는 BET 표면적과 정8면체 배위구조 속의 $Mo^{6+}$에 대한 정4면체 배위구조 속의 $Mo^{6+}$의 비, 즉 $Mo^6+[T]/Mo^{6+}[O]$ 값의 복합적인 관계를 통해 반응활성의 변화를 설명할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2405-2408
• /
• 2007

Oxidation of alkylaromatics including toluene and p-methoxytoluene has been carried out over alkali metal (AM)-containing catalysts such as AM-V/TiO2 and AM-VSb/Al2O3 in vapor-phase using oxygen as an oxidant. The selectivity for partial oxidations increases with incorporation of an alkali metal or with increasing the basicity of alkali metals (from Na to Cs), irrespective of the supports or reactants. However, the conversion is nearly constant or slightly decreasing with the addition of alkali metals in the catalyst. The increased selectivity may be related with the decreased acidity even though more detailed work is necessary to understand the effect of alkali metals in the oxidation. The AM-VSb/Al2O3 may be suggested as a potential selective catalyst for vapor-phase oxidations.

• 대한방사성의약품학회지
• /
• 제3권2호
• /
• pp.116-121
• /
• 2017

To overcome the low reactivity and solubility of alkali metal fluorides (MFs), various types of phase transfer catalysts (PTCs) have been developed over the last decades. However, since the fluoride activated by such PTC sometimes has a strong basicity, it may cause various side reactions such as elimination reaction or hydroxylation reaction in the nucleophilic fluorination reaction. Also, they may cause separation problems in the compound purification process. In recent advanced study, various PTCs have been developed to solve these problem of conventional catalyst. In this review, we would like to introduce three kinds of novel multifunctional organic catalysts such as bis-tert-alcohol-functionalized crown-6-calix[4]arene (BACCA), easy separable pyrene-tagged ionic liquid (PIL) by reduced graphene oxide (rGO), and tri-tert-butanolamine organic catalyst.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2004년도 수소연료전지공동심포지움 2004논문집
• /
• pp.233-238
• /
• 2004

• 대한방사성의약품학회지
• /
• 제7권2호
• /
• pp.141-146
• /
• 2021

With increasing interest in fluorinated compounds, nucleophilic fluorination reaction has been generally used for synthesizing fluorine-containing chemicals. However, alkali metal fluorides (MFs) generally have low solubility and reactivity in organic solvent. To overcome these problems, various phase transfer catalysts (PTCs) have been investigated. Calix-arene is known as to capture the metal cation(M⁺), and therefore in this review, we would like to introduce several kinds of calix-arene based PTCs, such as bis-tert-alcohol-functionalized crown-6-calix[4]arene (BACCA), oligo-ethylene glycol linked bis-triethyleneglycol crown-5-calix[4]arene (BTC5A), and ionic liquid functionalized calix-arene based catalyst, as well as ion-pair receptor crown-6-calix[4]arene-capped calix[4]pyrrole.

• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.349-354
• /
• 2005

It is interesting to discover the reaction kinetics of the newly developed molybdenum containing catalysts. The dissociation/adsorption of nitrogen on molybdenum surface is known to be structure sensitive, which is similar to that of nitrogen on iron surface. The rates over molybdenum nitride catalysts are increased with the increase of total pressure. This tendency is the same as that for iron catalyst, but is quite different from that for ruthenium catalyst. The activation energies of the molybdenum nitride catalysts are almost on the same level, although the activity is changed by the addition of the second component. The reaction rate is expressed as a function of the concentration of reactants and products. The surface nature of $CO_3Mo_3N$ is drastically changed by the addition of alkali, changing the main adsorbed species from $NH_2$ to NH on the surface. The strength of $NH_x$ adsorption is found to be changed by alkali dopping.

• Bulletin of the Korean Chemical Society
• /
• 제22권7호
• /
• pp.673-677
• /
• 2001

Pseudo-first-order rate constants have been measured spectrophotometrically for the reactions of 8-(5-nitroquinolyl) 3-furoate with alkali metal ethoxides in anhydrous ethanol. The plot of kobs vs the concentration of alkali metal ethox ides is linear for the reactions performed in the presence of a complexing agent, 18-crown-6 ether, but exhibits upward curvatures for the corresponding reactions performed in the absence of the complexing agent, indicating that the alkali metal ions in this study behave as catalysts. Second-order rate constants were determined for the reactions with dissociated free ethoxide (kEtO-) and with ion paired alkali metal ethoxides (kEtO-M + ) from ion pairing treatments. The magnitude of catalytic effect (kEtO-M + /kEtO-) was found to be 1.7, 3.4 and 2.5 for the reaction of 8-(5-nitroquinolyl) 3-furoate, while 1.4, 3.6 and 4.2 for that of 4-nitrophenyl 2-furoate, 1.8, 3.7 and 2.4 for that of 8-(5-nitroquinolyl) benzoate, and 2.0, 9.8 and 9.3 for that of 8-(5-nitroquinolyl) 2-furoate with EtO- Li+ , EtO- Na+ and EtO- K+ , respectively. A 5-membered chelation at the leaving group is suggested to be responsible for the catalytic effect shown by alkali metal ions.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.1-12
• /
• 2006

This work reviews the effects of catalyst formulation and exhaust gas composition on soot oxidation in CDPF (Catalytic Diesel Particulate Filter). DOC's (Diesel Oxidation Catalysts) have been loaded with Pt catalyst (Pt/$Al_{2}O_3$) for reduction of HC and CO. Recent CDPF's are coated with the Pt catalyst as well as additives like Mo, V, Ce, Co, Fe, La, Au, or Zr for the promotion of soot oxidation. Alkali (K, Na, Cs, Li) doping of metal catalyst tends to increase the activity of the catalysts in soot combustion. Effects of coexistence components are very important in the catalytic reaction of the soot. The soot oxidation rate of a few catalysts are improved by water vapor and NOx in the ambient. There are only a few reports available on the mechanism of the PM (particulate matter) oxidation on the catalysts. The mechanism of PM oxidation in the catalytic systems that meet new emission regulations of diesel engines has yet to be investigated. Future research will focus on catalysts that can not only oxidize PM at low temperature, but also reduce NOx, continuously self-cleaning diesel particulate filters, and selective catalysts for NOx reduction.

• 한국대기환경학회지
• /
• 제22권4호
• /
• pp.431-439
• /
• 2006

Catalytic oxidation of benzene, toluene and xylene (BTX) using regenerated metal oxide catalysts (ZnO-CuO, NiO, $Fe_2O_3$, ZnO, CrO) were investigated in a fixed bed flow reactor to evaluate their feasibility for the purpose of removing volatile organic compounds (VOCs). Four kinds of pre-treatment methods such as gas (air and hydrogen), acid aqueous solution, alkali aqueous solution and cleaning agent were used to find out the optimal regeneration conditions. The physico-chemical properties of the used and regenerated catalysts were characterized by BET and TPR (Temperature Programmed Reduction). The used catalysts showed high conversion ratio and the catalytic ability of toluene oxidation was in the order of ZnO-CuO>$Fe_2O_3$>NiO>ZnO>CrO. We found that the acid aqueous pre-treatment (0.1 N HNO$_3$) was the best way to enhance the catalytic activity of $Fe_2O_3$. In addition, air and hydrogen gas treatment were optimal for NiO and ZnO-CuO catalysts, respectively. Furthermore, the decomposition of BTX depends on the type of a catalyst and a gas molecule.