• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.506-508
• /
• 2007

We studied the nematic liquid crystal (NLC) alignment capability with a new alignment method utilizing an inkjet printed polyimide (PI) layer. A good, uniform LC alignment was achieved by the good PI printing using a new alignment method. The pretilt angle generated on the printed PI layer using the alignment method was almost the same as that on printed PI layer using rubbing alignment method. In addition, the good electro-optical performances of the new aligned twisted nematic (TN) cell with printed PI surface was obtained

• 전기학회논문지
• /
• 제67권3호
• /
• pp.433-439
• /
• 2018

In this paper, a SDINS(strapdown inertial navigation system) rapid initial alignment technique with adaptive time delay compensation is proposed. The proposed method consists of two steps. In first step, misalignment and data latency are estimated by conducting pre-transfer alignment. Then, hybrid alignment is designed to rapidly find the misalignment changes induced by pyro-shock. To improve the performance of hybrid alignment, adaptive time delay compensation method is suggested. We verify the performance improvement of the proposed alignment scheme comparing with the conventional transfer alignment method by van test. The test result shows that the proposed alignment technique improves alignment performance.

• 한국전기전자재료학회논문지
• /
• 제16권3호
• /
• pp.214-218
• /
• 2003

We studied the nematic liquid crystal (NLC) aligning capabilities by the UV alignment method on a diamond like carbon (DLC) thin film surface A good LC alignment by UV exposure on the DLC thin film surface at 200${\AA}$ of layer thickness was achieved. Also, a good LC alignment by the UV alignment method on the DLC thin film surface was observed at annealing temperature of 180$^{\circ}C$. However, the alignment defect of the NLC was observed above annealing temperature of 200$^{\circ}C$. Consequently, the good thermal stability of LC alignment by the UV alignment method o the DLC thin film surface can be achieved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.336-339
• /
• 2000

Effects of liquid crystal (LC) alignment using an in-situ photo-alignment method by linearly polarized UV exposure during imidization of polyirnide (PI) on the two kinds of PI surfaces with side chain were investigated. The generated pretilt angle in nematic (N) LC using an in-situ photo-alignment method was smaller than that of a conventional photo-alignment method for short UV exposure time. Also, the pretilt angle of the NLC using an in-situ photo-alignment method increases with increasing UV exposure time on the two kinds of the PI surfaces. Finally, the pretilt angle of NLC can be improved by annealing treatment.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.950-953
• /
• 2000

Aligning capabilities of nematic liquid crystal(NLC) using an in-situ photo-alignment method with obliquely polarized UV exposure on a polyimide (PI) surface for homeotropic alignment were studied. The high angle for NLC can be measured by obliquely UV exposure of 30°on the PI surface for 10∼20 min. The pretilt angle of NLC generated using the in-situ photo-alignment was higher than that of a conventional photo-alignment method. Finally, we suggest that the control of pretilt angle in NLC with obliquely polarized UV exposure during imidization of the polymer for homeotropic alignment is promising method to generate high pretilt angle.

• Bioinformatics and Biosystems
• /
• 제1권1호
• /
• pp.82-87
• /
• 2006

현재 가장 많이 사용되는 단백질 구조 예측 방법은 비교 모델링 (comparative modeling) 방법이다. 비교 모델링 방법에서의 정확도를 높이기 위해서는 alignment의 정확도 역시 매우 필수적으로 필요하다. 비교 모델링 과정 중의 fold-recognition 단계에서 alignment의 정확도에 의해 template을 고르는 방법은 단지 가장 비슷한 template을 선택하는 방법에 비해 주목을 받지 못하고 있다. 최근에는 두 가지의 alignment에 사이의 shift 정보를 바탕으로 한 shift score라는 수치가 alignment의 성능을 표현하기 위해서 개발되었다. 우리는 더 정확한 구조 예측의 첫걸음이 될 수 있는 shift score를 예측하는 방법을 개발하였다. Shift score를 예측하기 위해 support vector regression (SVR)이 사용되었다. 사전에 구축된 라이브러리 안의 길이가 n 인 template과 구조를 알고 싶은 query 단백질 사이의 alignment는 n+2 차원의 input 벡터로 변환된다. Structural alignment가 가장 좋은 alignment로 가정되었고 SVR은 query 단백질과 template 단백질의 structural alignment과 profile-profile alignment 사이의 shift score를 예측하도록 training 되었다. 예측 정확도는 Pearson 상관계수로 측정되었다. Training 된 SVR은 실제의 shift score와 예측된 shift score 사이에 0.80의 Pearson 상관계수를 갖는 정도로 예측하였다.

• Journal of Astronomy and Space Sciences
• /
• 제31권3호
• /
• pp.241-246
• /
• 2014

The Amon-Ra instrument is the main optical payload of the proposed EARTHSHINE satellite. It consists of a visible wavelength instrument and an IR energy channel instrument to measure a global Earth albedo. We report a new sensitivity technique for efficient alignment of the visible channel instrument. Whilst the sensitivity table method has been widely used in the alignment process, the straightforward application of the method tends to produce slow process convergence because of shop floor alignment practice uncertainties. We investigated the error sources commonly associated with alignment practices and used them when estimating the Zernike polynomial coefficients. Aided with single center field wavefront error (WFE) measurements and their corresponding Zernike polynomial coefficients, the method involves the construction and use of an experimental, instead of simulated, sensitivity table to be used for alignment state estimations. A trial alignment experiment for the Amon Ra optical system was performed and the results show that 71.28 nm in rms WFE was achieved only after two alignment iterations. This tends to demonstrate its superior performance to the conventional method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.526-529
• /
• 2002

We studied the nematic liquid crystal (NLC) aligning capabilities by the UV alignment method on a diamond like carbon (DLC) thin film surface. A good LC alignment by UV exposure on the DLC thin film surface at $200\AA$ of layer thickness was achieved. Also, a good LC alignment by the UV alignment method on the DLC thin film surface was observed at annealing temperature of $180^{\circ}C$. However, the alignment defect of the NLC was observed above annealing temperature of $200^{\circ}C$. Consequently, the good thermal stability of LC alignment by the UV alignment method on the DLC thin film surface can be achieved.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.708-715
• /
• 2010

In Strapdown Inertial Navigation System, alignment accuracy is the most important factor to determine the performance of navigation. However by an existing self-alignment method, it takes a long time to acquire the alignment accuracy that we want. So, to attain the desired alignment accuracy in as little as $\bigcirc$ minutes, we have developed the precise multi-position alignment method. In this paper, it is proposed a inertial measurement matching transfer alignment method among alignment methods to minimize the alignment error in a short time. It is based on a mixed velocity-DCM matching method be suitable to the operating environment of vertical launching system. The compensation methods to reduce misalign error, especially azimuth angle error incurred by measurement time-delay error and body flexure error are analyzed and evaluated with simulation. This simulation results are finally confirmed by experimentations using FMS(Flight Motion Simulator) in Lab and the integration test to follow the fire control mission.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.61.2-61
• /
• 2001

The purpose of the initial alignment of a SDINS is to get a coordinate transformation matrix from the body frame to the navigation frame. The initial alignment is one of the most important processes in the navigation system since its error has a large influence on the navigation solution. In this paper, a real-time initial alignment algorithm for the SDINS is developed using the Kalman filter. The steady state error analysis is performed for the developed Kalman filter technique and the gyrocompass loop method. The performance of the developed alignment method is compared with the gyrocompass loop method through the real-time alignment experiments.