• 대한화상학회지
• /
• 제22권2호
• /
• pp.34-37
• /
• 2019

Fires in operating rooms rarely occur. However, this type of disaster can complicate almost any surgical procedure. Fuel, heat and oxygen are related with fire outbreak. When ignition sources such as alcohol-based surgical preparation solutions are present, the risk of an operating room fire increases, and burns are more severe in such conditions. Many manufacturers recommend waiting at least three minutes after application to allow complete drying for reduce fire risk. There are a few studies regarding flame burns in the operation room, although most of these studies are related to preoperative skin preparation. However, alcohol containing solutions can be used occasionally for cleansing of the operation field after the surgery, therefore, the surgical team should pay attention to surgical fires, even if they have completed the operation successfully. We present our case of a post-operative flame burn and introduce some precautions that will reduce the risk of alcohol burns.

• Macromolecular Research
• /
• 제17권8호
• /
• pp.591-596
• /
• 2009

To trace the plasticizing effects of propylene glycol (PG) on poly(vinyl alcohol) (PVA), the rheological properties of PVA solutions in dimethyl sulfoxide (DMSO) and the physical properties of PVA films were discussed in terms of PG content. Both properties were closely related to the hydrogen bond breaking effects of PG The 6 and 12 wt% PVA solutions containing PG exhibited Bingham behavior, which was more noticeable at lower plasticizer content and higher polymer concentration. The 6 wt% PVA solutions containing more than 30 wt% PG showed a sudden decrease of viscosity over the frequency range of 0.08 and 0.2 rad/s. However, the 12 wt% PYA solutions showed no viscosity reduction even at a PG content up to 40 wt%. The glass transition temperature of the PVA/PG films was almost linearly decreased with increasing PG content but an abrupt reduction was observed at a plasticizer content 30 wt%, suggesting that the hydrogen bond breaking effects of PG on PVA became dominant between 20 and 30 wt%. This effect was further supported by the similar tendency of the tensile properties.

• 대한화학회지
• /
• 제25권1호
• /
• pp.21-25
• /
• 1981

바륨과 수은이온의 분포계수에 미치는 부틸알코올의 영향이 양이온 교환수지, Dowex 50w-x8, 200~400 mesh와 염산, 부틸알코올 및 물을 포함하는 용액 사이에서 연구되었다. 바륨과 수은의 분포계수는 <뱃치>방법에 의하여 측정하였다. 금속이온들의 분포계수는 일반적으로 부틸알코올 분자내의 탄소의 가지수가 증가함에따라 감소하였다. 이것은 바륨과 수은의 분포계수에, 부틸알코올의 물에 대한 용해도와 입체적인 성질이 영향을 미치고 있음을 보여 준다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.112-116
• /
• 2000

This paper presents anisotropic ethcing characteristics of single-crystal silicon in tetramethylammonium hydroxide(TMAH):isopropyl alcohol(IPA) solutions containing pyrazine. With the addition of IPA to TMAH solutions, etching characteristics are exhibited that indicate an improvement in flatness on the etching front and a reduction in undercutting, but the etch rate on (100) silicon is decreased. The (100) silicon etch rate is improved by the addition of pyrazine. An etch rate on (100) silicon of $0.8\;{\mu}m/min$, which is faster by 13 % than a 20 wt.% solution of pure TMAH, is obtained using 20 wt.% TMAH:0.5 g/100 ml pyrazine solutions, but the etch rate on (100) silicon is decreased if more pyrazine is added. With the addition of pyrazine to a 25 wt.% TMAH solution, variations in flatness on the etching front were not observed and the undercutting ratio was reduced by 30 ~ 50 %.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.61-69
• /
• 2004

Small angle light scattering (SALS) and field emission scanning electron microscope (FE-SEM) have been used to investigate the effects of alcohol on phase separation of chlorinated poly(vinyl chloride) (CPVC)/tetrahydrofuran (THF)/alcohol (9/61/30 wt%) solution during water vapor induced phase separation. A typical scattering pattern of nucleation & growth (NG) was observed for all casting solutions of CPVC/THF/alcohol. In the case of the phase separation of CPVC dope solution containing 30 wt% ethanol or n-propanol, the demixing with NG was observed to be heterogeneous. Meanwhile, the phase separation of CPVC dope solution with 30 wt% n-butanol was found to be predominantly homogeneous NG. Although the different phase separation behavior of NG was observed with types of alcohol additives, the resultant surface morphology had no remarkable differences. That is, even though the NG process by water vapor is either homogeneous or heterogeneous, this difference does not play a main role on the final surface morphology. However, it was estimated from the result of hydraulic flux that the phase separation by homogeneous NG provided the membrane geometry with lower resistance in comparison with that by heterogeneous one.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.181-182
• /
• 2003

Poly(vinyl alcohol) (PVA) is a semicrystalline polymer whose hydroxyl groups produce inter-and intramolecular hydrogen bonding. The extent of hydrogen bonding is greatly affected by stereoregularity of hydroxyl groups, so-called tacticity, of PVA[1-3]. Hydrogen bonding has a profound effect on the rheological and mechanical properties of the polymer, which is largely determined by the density and spatial arrangement of hydroxyl groups. (omitted)

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.143-144
• /
• 2002

A series of alcohols with perfluorinated segments $F(CF_2)_m(CH_2)_n-OH$, with m=8, 10 and n=4, 6, 10, were synthesized. First, the alcohols were reacted with fatty acid to produce several esters $(F(CF_2)_m(CH_2)-OOC-R$ with m=8, 10 and n=2, 4, 8,) containing perfluoro group by condensation reaction, and characterized by FT-IR, GC, and surface tension. The esters were soluble in ethyl ether, toluene, hexane, ethyl acetate, chloroform, and acetone, but insoluble in methyl alcohol, ethyl alcohol and isopropyl alcohol. Preliminary experiments on 1,2-dichloroethane solutions showed a remarkable decrease of surface tension upon addition of the esters. Also, the esters films ranged from 100 to $122^{\circ}$, depending on the structure of fatty acid esters. As the separate experiment, the water-repellency of coated paper and cotton was evaluated. As a result, the water droplet dropped in surface was not permeated for two weeks.

• 유변학
• /
• 제11권1호
• /
• pp.28-33
• /
• 1999

붕산은 폴리비닐알코올(PVA)의 히드록시기간의 가교를 형성할 수 있기 때문에 PVA용액내에 가입되면 용액의 유변학적 특성에 큰 영향을 미친다. 본 연구에서는 양이온이 존재하지 않는 경우 PVA/디메틸술폭시드(DMSO)/물/붕산계에 있어서 물의 함량이 유변학적 특성에 미치는 영향을 조사하였다. PVA/DMSO/물계에 붕산을 1 wt.% 첨가할 경우 물 함량이 증가할 수록 점도가 급속히 감소하였다. PVA/DMSO계에 1 wt.%의 붕산이 가입된 경우 양이온이 없어도 강한 가교구조를 형성하여 탄성겔의 점탄성특성을 나타낸 반면 PVA/물계에 1 wt.%의 붕산이 가입된 경우 전형적인 점성물질의 특성을 나타냈다. 순수한 DMSO나 혼합용매중 DMSO의 함량이 높으면 양이온의 존재없이도 붕산첨가에 의해 가교구조를 형성하여 급격한 점도변화를 나타냈으나 물 함량이 풍부한 계에서는 붕산의 첨가에 따른 점도의 변화가 미약하였으며 순수한 물을 용매로 사용한 경우 붕산첨가의 영향이 거의 없었다. 저장탄성률도 PVA/DMSO계의 경우가 가장 높은 값을 보였고 혼합용매계에는 물함량이 증가할 수록 감소하였다.

• 한국화재소방학회논문지
• /
• 제16권3호
• /
• pp.61-70
• /
• 2002

환경친화적이면서 저가의 비이온성 계면활성제가 함유된 소화약제를 조제하고 이의 물성과 소화약제 성능시험을 수행하였다. 약제의 주된 계면활성제로서 에톡실레이티이드 솔비톨 셉타올레이트, 에톡실레이트 솔비톨 트리올레이트 그리고 선형 에톡실레이트 이차 알코올을 사용하였다. 본 연구에서는 휘발유의 부피보다 4배 가량의 6％ 소화약제가 투입되는 경우 화재를 진압할 수 있는 능력을 가지고 있는 것을 알 수 있었다. 1단위 B급 화재 진화 시험을 수행한 결과, 소화성능은 계면활성제의 농도에 정비례하는 것으로 나타났다.

• 대한화학회지
• /
• 제10권1호
• /
• pp.4-10
• /
• 1966

A new method of cobalt determination has been developed by employing ethylenediamine tetrabutyl acetate(EDTA-butyl ester) synthesized from EDTA and Butyl alcohol. The synthesized EDTA ester dissolved in butyl alcohol extracts various metal ions from aqueous solutions. Cobaltous ion extracted into organic phase containing EDTA ester to form Co (II)-EDTA butyl ester complex is back extracted into alkaline aqueous phase forming a stable pink colored complex of Co (III). The optimum condition for spectrophotometric determination of cobalt via the new complex has been established. The absorption peak occurs at 540$m{\mu}$ and Beer's law was obeyed over the concentration range of 0∼50 ${\mu}g/ml$ of cobalt.