• 열처리공학회지
• /
• 제11권4호
• /
• pp.268-273
• /
• 1998

Effect of aging treatment on the microstructures and mechanical properties of 6N01 Aluminium alloy was investigated by differential scanning calorimetry, transmission electron microscopy, microhardness measurement and tensile test. It was found that the precipitation sequence of 6N01 Aluminium alloy was GP zone ${\rightarrow}$ metastable hexagonal $Mg_2S_i({\beta}^{\prime})$,${\rightarrow}$ equilibrium fcc $Mg_2S_i({\beta})$, and the precipitates at peak aged condition were GP zones and ${\beta}^{\prime}$ phase. Microhardness changes during over aged condition showed very small decrease upon increased aging time. This result was attributed to the very slow transformation rate of ${\beta}^{\prime}$ to ${\beta}$. Maximum hardness(116 Hv) and tensile strength(312.6MPa) with 22.3% elongation were obtained from the specimen aged at $180^{\circ}C$ for 15hrs.

• 공업화학
• /
• 제8권4호
• /
• pp.679-684
• /
• 1997

석유화학공업에서 사용된 유동접촉분해(FCC) 폐촉매의 주성분은 Si와 Al이며, 그외에 Fe, Zn, Ti 등의 기본금속과 알칼리금속 및 Ce, Nd, Ni, V 등의 희유금속이 함유되어 있다. $0.25mo1/dm^3-H_2SO_4$를 침출제로 폐촉매를 침출하였을 때 Ce가 640, Nd가 310, 그리고 V가 $450mg/dm^3$ 함유된 pH 1.0의 침출액을 얻었고, 아미노인산형 킬레이트수지에 의하여 Ce와 Nd를 선택흡착시킨 후, $4.0mol/dm^3-HCl$로 용리시켜 $1.2g/dm^3$의 Ce와 $0.75 g/dm^3$의 Nd 농축액을 얻었다. 농축액을 다시 옥살산 침전 및 공기산화법으로 처리하여 Ce와 Nd의 분리가 가능하였으며, 염소이온 공존하에 추출제 TOPO를 이용한 용매추출법으로 V와 Al을 각각 분리시켜, FCC 폐촉매로부터 순도가 99%인 Ce, Nd 및 V의 분리정제가 가능하였다.

• 대기
• /
• 제20권1호
• /
• pp.37-47
• /
• 2010

The methods measuring the precipitation drop size distribution(hereafter referred to as DSD) at Cloud Physics Observation System (CPOS) in Daegwallyeong are to use PARSIVEL (PARticle SIze and VELocity) disdrometer (hereafter referred to as PARSIVEL) and Micro Rain Radar (hereafter referred to as MRR). First of all, PARSIVEL and MRR give good correlation coefficients between their rain rates and those of rain gage: $R^2=0.93$ and 0.91, respectively. For the DSD, the rain rates are classified in 3 categories (Category 1: rr (Rain Rate) ${\leq}0.5\;mm\;h^{-1}$, Category 2: $0.5\;mm\;h^-1$ < rr < $4.0\;mm\;h^{-1}$, Category 3: rr ${\geq}4\;mm\;h^{-1}$). The shapes of PARSIVEL and MRR DSD are relatively most similar in category 2. In addition, we retrieve the vertical rain rate and liquid water content from MRR under melting layer, calculated by Cha et al's method, in Daegwallyeong ($37^{\circ}41{\prime}N$, $128^{\circ}45^{\prime}E$, 843 m ASL, mountain area) and Haenam ($34^{\circ}33^{\prime}N$, $126^{\circ}34^{\prime}E$, 4.6 m ASL, coast area). The vertical variations of rain rate and liquid water content in Daegwallyeong are smaller than those in Haenam. We think that this different vertical rain rate characteristic for both sites is due to the vertical different cloud type (convective and stratiform cloud seem dominant at Haenam and Daegwallyeong, respectively). This suggests that the statistical precipitation DSD model, for the application of weather radar and numerical simulation of precipitation processes, be considered differently for the region, which will be performed in near future.

• Archives of Pharmacal Research
• /
• 제13권1호
• /
• pp.28-32
• /
• 1990

Precipitation and purification of amylase secreted by Streptomyces aureofaciens 77 in liquid inorganic salts-starch medium under the optimum conditions were carried out. Ammonium sulphate fractionation was used to precipitate amylase in cell free culture filtrate. (NH/sub 4/)/sub 2/ SO/sub 4/ at a concentration of 50-70% saturation gave the highest enzyme yield. The obtained precipitates were redissolved in phosphate buffer (pH 7.0) and subjected to dialysis. The dialyzed enzyme preparation was applied to DEAE-cellulose column chromatography which resulted in an increase of purification up to 59.48 fold. A further step of purification was done by applying the obtained purified sample to Sephadex-G200 column chromatography which resulted in ann increase of purification up to 73. 92 fold. The results clearly indicated that the isolated amylase from S. aureofaciens 77 was only on type.

• 청정기술
• /
• 제16권4호
• /
• pp.284-291
• /
• 2010

온실가스로 알려진 $N_2O$의 촉매 분해는 최소한 670 K 이상의 온도가 요구되는 난해한 공정으로 알려져 있다. 본 연구는 CO 환원제와 더불어 473 K의 저온에서도 $N_2O$를 전량 분해될 정도로 높은 활성을 나타내는 혼합금속산화물(mixed metal oxide: MMO) 촉매에 Ce을 첨가함으로서 나타나는 $N_2O$ 분해활성에의 영향을 검토하기 위하여 수행되었다. MMO 촉매는 Co 및 Al 외에 Rh과 Pd을 사용하고, 여기에 Ce을 미량 첨가하여 공침전법으로 제조하였으며, 결과적으로 Ce 함량이 증가함에 따라 촉매 표면적은 감소하고 $N_2O$의 직접분해 활성이 감소하는 현상이 나타났다. 그러나 CO 환원제의 분위기 하에서는 이러한 활성 감소를 상쇄하고도 남을 정도의 높은 $N_2O$ 분해활성을 나타냈으며 Ce 첨가비율에 따른 활성저하도 줄일 수 있어서 MMO 촉매의 물리적 안정성 증대를 위해 Ce을 첨가할 경우 CO 환원제에 의한 $N_2O$ 환원 반응계의 활성 안정성도 유지될 수 있는 것으로 확인되었다.

• 청정기술
• /
• 제27권1호
• /
• pp.9-16
• /
• 2021

Active Matrix Organic Light-Emitting Diode (AMOLED) 봉지 공정은 수분과 산소에 매우 취약하기 때문에, 수분과 산소의 함량이 최소화된 고순도의 질소를 사용하여야 한다. 본 연구의 목적은 AMOLED 봉지 공정에 사용하는 질소에서 산소를 제거하기 위한 용도로 사용되는 구리계 촉매를 최적화하는 것이다. CuO, Al2O3, 또는 ZnO의 조성으로 이루어진 2성분계 및 3성분계 촉매를 공침법을 통해서 제조하였다. 제조된 촉매들을 BET, XRD, TPR, XRF의 분석장비를 활용하여 촉매의 특성을 분석하였다. 촉매의 산소 제거 성능을 확인하기 위해 고정층 반응기에서 촉매 산소 제거 반응 실험을 수행하고 산소 분석기를 통해 산소 함량을 측정하였다. 또한 사용된 촉매의 반복 재생을 통해 촉매의 재사용 성능을 검증하였다. CuO와 Al2O3 비율이 6 : 4, 7 : 3 및 8:2로 제조된 2 성분계 촉매의 특성과 산소 제거 능력을 비교하였다. CuO와 Al2O3의 비율이 8:2인 촉매의 환원성이 가장 높았는데, 이는 CuO의 분산도가 가장 높기 때문이다. 결과적으로, 2성분계 촉매 중에서 CuO와 Al2O3의 비율이 8 : 2 인 촉매의 산소 제거 능력이 가장 우수한 것으로 나타났다. CuO : Al2O3 의 비율이 8:2인 촉매에 ZnO를 2 wt% 넣어준 촉매가 3성분계 촉매 중에는 가장 우수한 산소제거 능력을 보였으며, 이는 뛰어난 환원성에 기인한다고 할 수 있다. 또한 이 촉매는 재생 실험을 통해서도 산소 제거능력이 유지된다는 것을 확인하였다.

• Journal of Welding and Joining
• /
• 제28권3호
• /
• pp.92-98
• /
• 2010

Ferritic stainless steels, which have relatively small thermal expansion coefficient and excellent corrosion resistance, are increasingly being used in vehicle manufacturing, in order to increase the lifetime of exhaust manifold parts. But, there are limits on use because of the problem related to cosmetic resistance, corrosions of condensation and high temperature salt etc. So, Aluminum-coated stainless steel instead of ferritic stainless steel are utilized in these parts due to the improved properties. In this investigation, Al-8wt% Si alloy coated 409L ferritic stainless steel was used as the base metal during Gas Tungsten Arc(GTA) welding. The effects of coated layer on the microstructure and hardness were investigated. Full penetration was obtained, when the welding current was higher than 90A and the welding speed was lower than 0.52m/min. Grain size was the largest in fusion zone and decreased from near HAZ to base metal. As welding speed increased, grain size of fusion zone decreased, and there was no big change in HAZ. Hardness had a peak value in the fusion zone and decreased from the bond line to the base metal. The highest hardness in the fusion zone resulted from the fine re-precipitation of the coarse TiN and Ti(C, N) existed in the base metal during melting and solidification process and the presence of fine $Al_2O_3$ and $SiO_2$ formed by the migration of the elements, Al and Si, from the melted coating layer into the fusion zone.

• 열처리공학회지
• /
• 제37권4호
• /
• pp.155-162
• /
• 2024

SCr420H steel which is commonly utilized for automotive components requires the carburizing heat treatment process. Abnormal grain growth during this treatment significantly affects the mechanical properties of the steel parts. Consequently, a process designed to prevent abnormal grain growth at certain elevated temperatures is essential. For enhanced grain refinement, we considered the addition of Nb in SCr420H steel. The experimental condition of the carburizing heat treatment involved reheating the steel sample to temperatures between 940℃ and 1080℃. Using scanning electron microscopy, we examined the microstructure of specimens treated with the secondary solution, revealing an organization of bainite and ferrite. Transmission electron microscopy was utilized to determine the type, shape, and size of the carbonitrides, showing a high fraction of AlN at the secondary solution treatment temperature of approximately 1050℃ and of (Nb,Ti)(C,N) around 1200℃. AlN particles measured about 100 nm and (Nb,Ti)(C,N) about 50 nm. Optical microscopy was utilized to assess grain size variations at different secondary solution treatment temperatures. It is noted that the temperature at which abnormal grain coarsening occurred rose with increasing secondary solution treatment temperatures, indicating a greater influence of (Nb,Ti)(C,N) with higher heat treatment temperatures. This research provides reference data for preventing abnormal grain growth in Nb-added low alloy steels undergoing carburizing heat treatment.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권16호
• /
• pp.7337-7342
• /
• 2015

The study aimed to investigate the profile of alkaloids in two ethyl acetate soluble fractions, namely fractions A and B from an ethanolic extract of Ficus septica leaves and cytotoxic effect on T47D breast cancer cells. Preparation of both fractions involved maceration of leaves with 70% (v/v) ethanol, filtration with $Al_2O_3$, precipitation with 0.1 N HCl, Mayer reagent, and 0.1 N NaOH, and also partition with ethyl acetate. Qualitative thin layer chromatography (TLC) was conducted to determine the profile of alkaloids in the two fractions, using alkaloid specific reagents such as Dragendorff, sodium nitrite, and Van Urk-Salkowski. Cytotoxic effects of both fractions on T47D cells were evaluated using MTT assay with a concentration series of 1.56; 3.12; 6.25; 12.5; 25 and $50{\mu}g/mL$. The TLC test showed that fractions A and B contained alkaloids with Rx values of 0.74 and 0.80 for fraction A and 0.74, 0.84, 0.92 for fraction B with regard to yohimbine using the mobile phase of n-buthanol:glacial acetic acid:distilled water (3:1:1 v/v/v). Moreover, an indole alkaloid was detected with Rx values of 0.80 and 0.84, respectively. Fractions A and B exhibited high cytotoxic effects on T47D cells with IC50 values of 2.57 and $2.73{\mu}g/mL$, respectively. In conclusion, overall the results of this study showed that fractions of Ficus septica contain alkaloids including indole alkaloid or its derivatives and possess a cytotoxic effect on T47D cells. This research supports the idea that alkaloids in F. septica have anticancer activity.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.354-359
• /
• 2007

Effects of forging and mechanical properties of 6061 aluminum alloy wheel for automobiles were investigated in the present study. Microstructural and tensile characteristics of automobile wheel after hot forging process using dynamic screw press were analyzed to evaluate effect of metal flow on mechanical properties. The results showed advanced mechanical properties of 6061 alloy wheel because of $Mg_2Si$ precipitation by T6, elongated grain by forging, and work hardening by dense metal flow, etc. Hot compression tests were conducted in order to characterize high temperature compression deformation behaviors and microstructural variation in the range of $300{\sim}450^{\circ}C$, in the strain rate range of $10^{-3}{\sim}10^1\;sec^{-1}$. As strain rate increased, maximum compression stress increased but it was shown the reverse linear relation between temperature and maximum stress irrelevant to strain rate variation. On the other hand, temperature and yield stress didn't have any linear relation and its relation showed big deviation by a function of strain rate and test temperature.