• 한국주조공학회지
• /
• 제18권3호
• /
• pp.240-245
• /
• 1998

In the view point of the environmental conservation and the energy reduction, the recycling of metal scrap is coming as one of the global subjects in the world. In this study, the movement of intermetallics with electromagnetic force in a melt of a scrap of Al-Si-Cu alloy (JIS ADC12), which was widely used in diecasting process, was investigated in order to eliminate the Fe element, which was usually accumulated in a scrap. In this study, we applied electromagnetic method to eliminate Fe element in ADC12 aluminum alloy scrap which contains 1.64wt.% Fe and the effects of electromagnetic force on the particle movement was visualized and confirmed by water modeling and experiment. As a result, the Fe intermetallic compounds are moved to the direction opposite to that of the electromagnetic force as the force applies, thus eliminated from the bulk metal. Therefore, the content of Fe in matrix decreased from 1.64wt.% to 0.45wt.%.

• 보존과학연구
• /
• 통권34호
• /
• pp.102-108
• /
• 2013

전라북도에 소재한 유형목조문화재의 단청기록화 사업의 일환으로 송광사 나한전(전라북도 유형문화재 제172호)에 채색된 안료에 대한 X-선형광분석을 실시하였으며, 이들에 대한 색상별 안료의 성분과 보수시기의 동일성을 비교하였다. 분석결과 주성분 및 미량성분을 검토한 결과 나한전에 사용된 안료는 청색은 군청(($3NaAl{\cdot}SiO_4{\cdot}Na_2S_2$), 녹색은 양록($Cu(C_2H_3O_2)_2{\cdot}3Cu(AsO_2)_3$, 주황은 장단($Pb_3O_4$), 황색은 크롬옐로($PbCrO_4$)로 분류되었다. 나한전 외부, 내부의 안료 성분분석으로는 채색 시기를 구별하긴 어려웠다.

• 소성∙가공
• /
• 제28권1호
• /
• pp.34-42
• /
• 2019

In this study, various alloying elements (Cr, Sr, Ca, Cd) were added to improve the mechanical properties of ADC12 fabricated by a die casting process. The effect of alloying elements on the microstructure and mechanical properties were investigated. The phase analysis results of the modified ADC12 alloy with conventional ADC12 alloy, showed the similar characteristics of Al matrix, Si phase, $CuAl_2$ phase and the Fe intermetallic phase. As a result of the microstructure observation, the secondary dendrite arm spacing (SDAS) was shown to have decreased after the addition of the alloying elements. The eutectic Si phase, which existed as flake form in the conventional ADC12 alloy, was modified finely as a fiber form in the modified ADC12 alloy. It was observed that the $CuAl_2$ phase as the strengthening phase was relatively finely distributed in the modified ADC12 alloy. The Fe intermetallic appeared as a Chinese script shaped $Al_6$ (Mn,Fe) which is detrimental to mechanical properties in conventional ADC12 alloy. On the other hand, in the modified ADC12 alloy, polyhedral ${\alpha}-Al_{15}Si_2$ $(Fe,Mn,Cr)_3$ was observed. The tensile properties were improved in the modified ADC12 alloy. The yield strength and tensile strength increased by 12.4% and 10.0%, respectively, in the modified ADC12 alloy, and the elongation was also seen to have been increased. As a result of the pin on disk wear test, the wear resistance properties were also improved by up to about 7% in the modified ADC12 alloy. It is noted that the wear deformation microstructures were also observed, and it was found that the fine eutectic Si and strengthening phases greatly improved abrasion resistance.

• 한국주조공학회지
• /
• 제20권6호
• /
• pp.377-385
• /
• 2000

Al matrix composites as the most promising MMCs can be expected to be excellent engineering materials in the nearest future. So as to improve material properties of composite, many manufacturing processes have been developed. Among them, squeeze casting process which offers fine microstructure and near-net-shape is one of the most successful MMCs manufacturing processes. But, in case of with subsieve size particles (under 44 ${\mu}m$), it is very difficult to homogeneously distribute particles in matrix of Al matrix composite by various casting processes, including squeeze casting used so far. Duplex process which was developed in previous study was used to distribute the particle of subsieve size more homogeneously in matrix of Al matrix composite. Microstructures, wear and heat resistance characterization of Al-Si-Cu-Mg-(Ni)/SiCp manufactured by duplex process were examined to clarify the effect of manufacturing conditions, particle size of reinforcement and alloying elements. Al matrix composites reinforced with SiCp(10 ${\mu}m$) have the lowest wear amount among composites reinforced with 3 ${\mu}m$, 5 ${\mu}m$ and 10 ${\mu}m$ SiCp. The wear amount of Al matrix composites with 10 wt.% SiCp(3, 5, 10 ${\mu}m$) was decreased according to the increase of the sliding speed because abrasive wear takes place at high sliding speed of 4m/s and worn debris with block type occurs at low sliding speed of 1m/s. As for heat resistance, it is made clear that remarkable heat resistance property can be obtained by addition of Ni element in Al matrix composites.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2006년도 춘계학술발표대회 및 제10회 신소재 심포지엄 논문개요집
• /
• pp.38.1-38.1
• /
• 2006

• 자원환경지질
• /
• 제43권3호
• /
• pp.269-278
• /
• 2010

우리는 단청안료의 착색제에 대한 특성을 살펴보았고, 이번 연구가 우리 전통 단청의 색을 재현하는데 기여하길 바란다. 광주 전남지역 목조 고건축물에서 자연적으로 박리가 일어난 부분의 단청안료 시료를 채취하고, 이를 XRD와 EDS-SEM분석을 이용하여 착색제를 분석하였다. 백색안료에서는 고대부터 착색제로 사용되어온 석고$(CaSO_4{\cdot}2H_{2}O)$,석영$(SiO_2)$, 백연석$(PbCO_3)$ 및 호분$(CaCO_3)$과 현대에서 많이 사용되는 산화지당$(TiO_2)$이 모든 시료에서 확인되었다. 적색안료에서는 고대부터 착색제로 사용된 석간주$(Fe_{2}O_{3})$와 연단$(Pb_{3}O_{4})$ 및 현대안료 착색제인 C. I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$이 확인 되었지만, 진사(cinnabar, HgS)는 관찰되지 않았다. 황색안료에서는 납을 주성분으로 하는 황연인 홍연석$(PbCrO_4)$과 고대부터 사용된 밀타승(PbO)이 확인되었다. 청색안료에서는 착색제인 소달라이트 $(Na_{4}BeAlSi_{4}O_{12}Cl)$와 노제안$(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$이 확인되었으며, 현대안료 착색제인 C. I. pigment blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ 도 확인되었다. 녹색안료에서는 착색제로 카루머타이트(calumetite, $Cu(OHCI)_{2}{\cdot}2H_{2}O$), 에스콜라이트$(Cr_{2}O_{3})$, 디크롬트리옥사이드(dichromium trioxide, $Cr_{2}O_{3}$), 에머랄드그린$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$ 및 현대안료 착색제인 C. I. pigment green$(C_{32}H_{16}-XCl_{x}Cu_{8})$이 확인되었다. 흑색안료에서는 먹(송연)이 확인 되었다.

• 분석과학
• /
• 제31권6호
• /
• pp.240-246
• /
• 2018

본 연구에서는 GD-MS를 활용하여 원소 별 함량이 다른 세 종류의 알루미늄 매질의 표준 시료를 분석하였다. 13 종의 원소(Mg, Si, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Sn, Pb)에 대해 검량 곡선을 작성하고 그 기울기를 RSF(Relative sensitivity reference)로 확립하였다. 검량 곡선은 X축을 IBR(Ion beam ratio)로, Y축을 표준 시료의 인증 값으로 작성하였다. 검량 곡선의 정밀도와 직선성을 평가하기 위해 RSD(Relative standard deviation)와 결정 계수를 계산하였다. 그 결과 모든 원소의 RSD는 10 %이내로 높은 정밀도를 나타냈다. 바나듐, 니켈 그리고 갈륨 원소를 제외한 대부분의 원소들은 결정 계수가 0.99 이상으로 1에 가까운 값을 얻어 직선성이 우수했다. 바나듐, 니켈 그리고 갈륨 원소는 결정 계수가 0.90~0.95 범위로 비교적 낮은 직선성을 나타냈으며, 이는 좁은 농도 범위로 인한 오차로 판단된다. 바나듐, 니켈 그리고 갈륨 원소는 결정 계수는 낮지만 각각의 표준 시료 RSF와 기울기로 확립한 표준RSF(Standard-RSF)가 비슷하여 정량 분석을 위한 RSF로 활용 가능할 것으로 판단된다. 다른 매질의 시료에 표준RSF(Al matrix)를 적용 가능 여부와 실제 표준 값에 대한 오차를 확인하기 위해서 철 매질(Fe matrix)의 표준 시료를 분석하여 검증하였다. 구리 원소를 제외한 6 종(Al, Si, V, Cr, Mn, Ni) 원소의 오차율은 약 30 %로 나타났으며, 구리 원소는 측정을 방해하는 불순물 화합물의 영향으로 오차율이 크게 나타난 것으로 판단된다. 일반적으로 동위원소$^{63}Cu$는 $^{54}Fe^{2+}-^{36}Ar$ 간섭을 받고 $^{65}Cu$는 $^{56}Fe-Al^{3+}$간섭을 받는다. 이를 분해하기 위해서는 8000 이상의 분해능이 필요하다. 하지만, 높은 분해능은 이온의 투과도를 낮추기 때문에 미량원소 분석에 어려움이 있다. 구리 원소를 제외한 알루미늄 외 5종의 원소에 대해서는 비교적 적은 오차로 정량 분석이 가능한 것으로 확인되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 제6회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.43-46
• /
• 2004

CuPc와 $C_{60}$을 이용하여 ITO/CuPc/Al의 CuPc 단층구조와 $ITO/CuPc/C_{60}/Al$의 이종접합 구조에서의 광기전 특성을 연구하였다. CuPc 단층구조에서는 CuPc층의 두께를 10nm에서 50nm로 가변하여 전압-전류 특성을 측정한 결과 40nm 부근에서 최적화된 전기적인 특성이 나타났으며, $CUPC/C_{60}$의 이종접합 구조에서는 CuPc와 $C_{60}$의 두께 비율을 1 : 1 (20nm : 20nm), 1 : 2 (20nm : 40nm), 1 : 3 (20nm : 60nm)으로 가변하여 측정한 결과, 1 : 2의 두께비에서 최적화된 특성을 얻었다. 광원은 500W Xe lamp(ORIEL 66021)를 이용하였으며, 광원의 세기는 보정된 radiometer/photometer (International Inc. IL14004)와 Si-photodiode로 측정하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.55-63
• /
• 2001

Friction and wear properties of brake friction materials containing different metal fibers (Al, Cu or Steel fibers) were investigated using a pad-on-disk type friction tester. Two different materials(gray iron and Al-MMC)) were used for disks rubbing against the friction materials. Results from ambient temperature tests revealed that the friction material containing Cu fibers sliding against cast iron disk showed a distinct negative ${\mu}$-ν (friction coefficient vs. sliding velocity) relation implying possible stick-slip generation at low speed. The negative ${\mu}$-ν relation was not observed when the Cu-containing friction materials were rubbed against the. Al-MMC counter surface. As applied loads increased, friction materials showed higher friction coefficients comparatively. Friction materials slid against cast iron disks exhibited higher friction coefficients than Al-MMC disks during high temperature tests. On the other hand, high temperature test results suggested that copper fibers in the friction material improved fade resistance and the steel fibers were not compatible with Al-MMC disks showing severe material transfer and erratic friction behavior during sliding at elevated temperatures.

• ETRI Journal
• /
• 제21권3호
• /
• pp.16-21
• /
• 1999

After etching Al-Cu alloy films using SiCl4/Cl_2/He/CHF3 mixed gas plasma, the corrosion phenomenon at the grain boundary of the etched surface and a passivation layer on the etched surface with an SF6 plasma treatment subsequent to the etching were studied. In Al-Cu alloy system, corrosion occurs rapidly on the etched surface by residual chlorine atoms, and it occurs dominantly at the grain boundaries rather than the crystalline surfaces. To prevent corrosion, the SF6 gas plasma treatment subsequent to etching was carried out. The passivation layer is composed of fluorine-related compounds on the etched Al-Cu surface after the SF6 treatment, and it suppresses effectively corrosion on the surface as the SF6 treatment pressure increases. Corrosion could be suppressed successfully with the SF6 treatment at a total pressure of 300 mTorr. To investigate the reason why corrosion could be suppressed with the SF6 treatment, behaviors of chlorine and fluorine were studied by various analysis techniques. It was also found that the residual chlorine incorporated at the grain boundary of the etched surface accelerated corrosion and could not be removed after the SF6 plasma treatment.