• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.579-581
• /
• 2004

A new DCM derivative containing the phenoxazine moiety (DCPXZ) has been synthesized for use as a red fluorescent dye molecule in organic light-emitting diodes (OLEDs). The photoluminescence and electroluminescence properties of DCPXZ were examined. The maximum photoluminescence of DCPXZ in chloroform solution ($10^{-5}$ mol) was observed at 616 nm. EL devices were fabricated with the structure ITO/PEDOT-PSS/Cu-PC(15nm)/${\alpha}$-NPD(45nm)/$Alq_3$:DCPXZ(30nm)/$Alq_3$(30nm)/LiF(0.5nm)/Al. The maximum EL emission for the 2.0% DCPXZ-doped device was at 608 nm with CIE coordinates (0.57, 0.42). The EL device exhibited a maximum brightness of 15,000 cd/$m^2$ at 19.4 V and a power efficiency of 1.04 lm/W at a luminance of 100 cd/$m^2$.

• 한국음향학회지
• /
• 제17권8호
• /
• pp.41-47
• /
• 1998

이중 통신(Duplexer) 필터를 설계 및 개발하기 위한 최적조건을 구하기 위해 36° LiTaO3 기판 표면에 빗살무늬 변환기를 사용한 모의 실험을 수행하였으며, 전극 재료로는 Cu-Al(W3%)합금을 이용하였다. 제작한 듀플렉스 필터의 사다리(Lader)형 구조로서 직렬 공진기와 병렬 공진기의 결합으로 필터를 구성하였다. 적절한 통과대역과 저지대역을 형성 하기 위하여 직렬 공진기와 병렬 공지기의 주파수 차이를 30MHz로 했으며, 낮은 저지대역 을 형성하기 위하여 두 공진기의 전기용량의 비는 1로 하였고, 전극의 두께는 2,500Å으로 하였을 때 설계 조건과 일치하는 주파수 응답을 얻었다. 제작한 듀플렉서 필터의 주파수 특 성은 중심 주파수는 836.5MHz와 881.5MHz, 통과대역 폭은 25MHz, 삽입손실은 2.5dB 이하 및 저지대역은 -35dB이하로 나타났다.

• 마이크로전자및패키징학회지
• /
• 제15권1호
• /
• pp.1-6
• /
• 2008

칼슘 코발트 층상 산화물계에서 $Ca_3Co_2O_6$와 $Ca_3Co_4O_9$를 기본으로 하여 열전 특성 향상을 위해 Ca 위치를 Bi, Sr, La, K로 부분 치환하고, Co위치를 Mn, Fe, Ni, Cu, Zn로 치환한 다결정 산화물을 제조하여 $300{\sim}1000K$ 까지의 열전 특성을 분석하였다. Bi가 치환된 $Ca_3Co_4O_9$계의 $Ca_{2.7}Bi_{0.3}Co_4O_9$는 전기전도도 $85.4({\Omega}cm)^{-1}, Seebeck계수 $176.2{\mu}V/K$그리고 파워팩터 $265.2{\mu}W/K^m$로 가장 높은 열전 물성치가 관찰되었다. 열전 모듈 제조를 위해서 각각의 열전반도체의 성능지수Z($10^{-4}/K$)가 0.87, 0.41의 값인 p형 열전 소재로 $Ca_{2.7}Bi_{0.3}Co_4O_9$를, n형 열전 소재로($Zn_{0.98}Al_{0.02}$)O를 선택하여 열전쌍을 제조하였다. 제조된 2쌍의 기본 열전쌍은 120K의 온도차에서 약 30mV정도의 기전력이 나타났다.

• 자원환경지질
• /
• 제46권2호
• /
• pp.199-206
• /
• 2013

대현 금-은광상은 Cambro-Ordovician 석회암질 대리암내에 발달된 NE 방향성의 단열대를 따라 형성된 2개의 열수성 석영맥으로 구성된다. 모암변질시 원소 분산과 이득/손실을 알아보기 위해 모암, 열수변질대 및 금-은 광맥에서 시료를 채취하였다. 모암변질시 뚜렷한 변질대가 관찰되지 않으며 구성광물은 주로 방해석, 돌로마이트, 석영과 소량 녹염석 등이다. 이 광상의 광석광물은 유비철석, 자류철석, 황철석, 섬아연석, 황석석, 황동석, 방연석, 에렉트럼, 자연 창연 및 은 광물 등이 산출된다. 분석된 자료를 기초로, 모암은 주로 $SiO_2$, CaO 및 $CO_2$로 구성되며 소량 $Al_2O_3$, $Fe_2O_3(T)$ 및 MgO 등이 함유되어 있다. 광체로부터 모암으로 감에 따라 $SiO_2$, $Fe_2O_3(T)$, MgO, CaO 및 $CO_2$ 함량은 변화 폭이 크게 관찰된다. 모암변질시 모암의 물리-화학적 물성 때문에 원소 분산은 현저히 관찰되지 않으며 단지 광체 주변부에서만 관찰된다. 모암변질시 이득원소들은 $Fe_2O_3(T)$, 총 S, Ag, As, Bi, Cd, Cu, Ni, Pb, Sb, Sn, W 및 Zn이고 손실원소들은 $SiO_2$, MnO, MgO, CaO. $CO_2$ 및 Sr 이다. 따라서 우리의 결과물은 황강리 광화대내 석회암질 대리암을 모암으로 갖는 광상들의 지화학탐사시 활용될 수 있을 것이다.

• 한국생활과학회지
• /
• 제11권4호
• /
• pp.391-400
• /
• 2002

This study was intended to research the dyeing with natural walnut hull extracts over cotton, flax, rayon, wool, nylon and silk. We studied the dyeing conditions and mordant effect, and observed dyeability. The result are as follows: 1. In the dyeability with natural walnut hull extracts, protein and polyamide fiber has more dye uptake rather than cellulose fiber. 2. The optimum condition in the dyeing with natural walnut hull extracts was at $90^{\circ}C$, 12%(o.w.b) concentration in 90 mins. 3. In the case of the dyeability by repeated dyeing number, the dyeability of good dyeability fiber is improved in the first or second dyeing, but that of bad dyebality fiber is improved when it is dyed more repeatedly. 4. In the dyeablity treated with mordants, Al, Sn, and Mg don't have any differences, but Cu and Fe have some difference. The color of Fe mordant is green and the color of Cu mordant is blue. 5. In the case of the color fastness with mordant treatment, nylon is better than silk and wool in color fastness to washing but silk is better than nylon and wool in color fastness to light.

• 복식
• /
• 제36권
• /
• pp.109-119
• /
• 1998

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of Caseaslpinia Sappan, L. and Brazilin were studied. Appropriate extraction, dyeing and mordanting condition of Caeaslpinia Sappan, L. were determined, and the effect of mordanting method on dye up-take adn color fastness of dyed fabric was investigated. The most absorbance of Caeaslpinia Sappan, L. solution was 445nm, Brazilin was 448nm. The color of bazilin solution was affected by pH 7~9. The optimum temperature to extract Caesalpinia Sappan, L. was 10$0^{\circ}C$ adn dyeing solution for 1 hour. In case mordants concentration, the most absorbance was 0.3%. In case mordanting test, the best and proper temperature to quantities of absorbed mordants in silk was 8$0^{\circ}C$ and the most quantities of absorbed mordants in silk was mordant treatment by Cu. Effective dyeing time to silk was 60min. Effective mordanting temperature was 8$0^{\circ}C$, and its time was 30min. K/S value of dyeing fabrics was recoginazed by mordanting treat-ment, specially Fe, Sn, Al, Cu. K/S value of pre-mordanting was higher than post-mordanting. After soaping treatment K/S value of pre- and post-mordanting silk was decreased and 0.1%(W/V) quantity of mordant was sufficient for treatment. In the case of Caeaslpinia Sappan, L. fastness was increased by mordanting treatment. Mordants and mordanting treatment method affected the amount of absorption and color change of dyed silk.

• International Journal of Safety
• /
• 제1권1호
• /
• pp.52-57
• /
• 2002

The Decomposition of NO$_2$ (nitrogen dioxide), one of the Hazardous Air Pollutant (HAP), was studied by utilizing the SPCP (Surface induced discharge Plasma Chemical Processing) reactor so as to obtain optimum process variables and maximum decomposition efficiencies. Experimental results showed that for the frequency of 10kHz, the highest deco position efficiency of 84.7% for NO$_2$ was observed at the power consumptions of 20W. The decomposition efficiency of $NO_2$ was found to be: 1) proportional to the residence times, and inversely proportional to the initial concentrations of $NO_2$; 2) the maximum when the electrode diameter was 3mm; 3) influenced by the electrode material, decreasing in the order of W>Cu>Al; and 4) proportional to the $CH_4$ content, due to which the highest efficiency of 98% was obtained with almost all the $NO_2$ removed.

• 복식문화연구
• /
• 제24권5호
• /
• pp.577-587
• /
• 2016

Natural dye extracted from Salicornia bigelovii was applied to silk fabrics by dip dyeing process. The dyeing properties and the functionalities of the silk fabrics were determined. Factors affecting the dyeing properties such as dyestuff concentration, temperature, time and pH were studied. The colorimetric parameters $L^*$, $a^*$, $b^*$, and H, V/C values were measured to select the optimal mordanting conditions. The color-fastnesses of the dyed and mordanted fabrics were estimated for practical use; in addition, the antibacterial property, ultraviolet protection properties were evaluated. The dyeabilities of silk increased depending on the increasing dye concentration, dyeing time, and dyeing temperature. And optimum dyeing results were achieved when dyeing with 300% (o.w.f.) of dye concentration at $90^{\circ}C$ for 100 minutes and at pH 3. The dyed silk fabrics without mordants produced yellow (Y) color and showed yellow (Y) or green yellow (GY) colors depending on the mordants type. The light fastness of dyed and Al mordanted silk fabrics were found to be excellent, and the drycleaning and rubbing fastness were good. The dyed silk fabrics showed no antibacterial property, but Al and Cu mordanted silk fabrics showed 99.9% reduction rate. The ultraviolet protection properties of the dyed silk fabric was improved. And the ultraviolet protection properties of mordanted samples showed very good ultraviolet protection properties.

• 한국의류산업학회지
• /
• 제17권6호
• /
• pp.1030-1038
• /
• 2015

The purpose of this study is to investigate the dyeability of crabyon fiber contained cotton towels after dyeing with gallut. In this study, the colorants of gallnut were extracted with boiling water at 60℃ and 60min. Crabyon, composite fiber of Chitin/Chitosan and cellulose, is manufactured by uniformly blending Chitin/Chitosan and cellulose viscose and extruding the blended viscose into spin-bath. Cotton towels with crabyon fiber dyed with extracted solution from gallnut according to concentration, temperature and time. Crabyon fiber contained cotton towels dyed using gallnut were pre of post-mordanted using Al, Cu, and Fe. The dyeability(K/S) and color characteristics(L^*, a^*, b^*, C, and h(color angle)) of dyed crabyon fiber contained cotton towels were measured by computer color matching machine and photographs. The crabyon fiber composition of cotton towels was conformed by amide peak(-CONH-) of chitin or chitosan of FT-IR spectroscopy. The results obtained were as follows; The amide peak of crabyon fiber contained cotton towels appeared at about 1652 cm⁻¹. The dyeability of crabyon fiber contained cotton towel was increased gradually with increasing concentration of gallnut dyeing solution and saturated at about 150%(o.w.f). The optimum dyeing temperature and dyeing time were 90~100℃ and 80minutes expectively. The crabyon fiber contained cotton towels were dyed reddish yellow by non, Al, and Cu mordanting, reddish blue by Fe mordanting, respectively. The fastness to washing according to concentration of gallnut in and mordanting method indicated good grade result as more than 3~4 degree in all conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1501-1503
• /
• 1999

The $(Sr_{0.85}Ca_{0.15})TiO_3$(SCT) thin films are deposited on Pt-coated electrode$(Pt/TiO_2/SiO_2/Si)$ using RF sputtering method. Ag, Cu, Al, Pt films for the formation of top eletrode were doposited on SCT thin films by thermal evaporator and sputtering. The effects of top electodes have be studied on SCT samples with a variety of top electrode materials.