• 멤브레인
• /
• 제3권3호
• /
• pp.136-139
• /
• 1993

It is well known that the membrane permeation in pervaporation is governed by both the chemical nature of the membrane material and the physical structure of the membrane and also the separation can be achieved by differences in either solubility, size or shape. The solubility of the penerrant in the polymeric membrane can be described qualitively by applying the Hildebrand relation [1] which relates the energy of mixing of the penerrant and the polymer material. Froehling et al. have tried to predict the swelling behavior of polymers for the systems of polyvinylchloride(PVC)-toluene-methanol, PVC-trichloroethylene-nitromethane and PVC-n-butylacetate-nitromethane[2]. The former two systems which do not show the donor/acceptor interactions upon mixing showed the successful results[2]. In addition to this technique, there are several other possible approaches to predict the swelling behaviors of polymers, such as the surface thermodynamic approach[3, 4], the comparison of the membrane polarity with the solvent polarity in terms of Dimroth's solvent polarity value[5].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.385-386
• /
• 2008

This paper reports the design of the ultra low power consumption microhotplates for high temperatures. The microhotplates consisting of a platinum-based heating element on AlN/poly 3C-SiC layers were designed. The microhotplate is a $600\times600{\mu}m^2$ square shaped membrane made of $1{\mu}m$ thick ploy 3C-SiC suspended by four legs. The microhotplate was compared with $Si_3N_4/SiO_2/Si_3N_4$(NON) structure microhotplate by COMSOL simulation system. Thermal uniformity, power consumption and thermal characterizations of microhotplates based on 3C-SiC thin film are better than microhotplates with NON structure.

• 한국멀티미디어학회논문지
• /
• 제8권12호
• /
• pp.1589-1596
• /
• 2005

The imprecise real-time system provides flexibility in scheduling time-critical tasks. Most scheduling problems of satisfying both 0/1 constraint and timing constraints, while the total error is minimized, are NP complete when the optional tasks have arbitrary processing times. Liu suggested a reasonable strategy of scheduling tasks with the 0/1 constraint on uniprocessors for minimizing the total error. Song et al suggested a reasonable strategy of scheduling tasks with the 0/1 constraint on multiprocessors for minimizing the total error. But, these algorithms are all off-line algorithms. On the other hand, in the case of on line scheduling, Shih and Liu proposed the NORA algorithm which can find a schedule with the minimum total error for a task system consisting solely of on-line tasks that are ready upon arrival. But, for the task system with 0/1 constraint, it has not been known whether the NORA algorithm can be optimal or not in the sense that it guarantees all mandatory tasks are completed by their deadlines and the total error is minimized. So, this paper suggests an optimal algorithm to search minimum total error for the imprecise on-line real-time task system with 0/1 constraint. Furthermore, the proposed algorithm has the same complexity, O(N log N), as the NORA algorithm, where N is the number of tasks.

• 한국물환경학회지
• /
• 제22권4호
• /
• pp.666-671
• /
• 2006

Effects of a rainfall event (July 28, 2005) on the hydrochemical characteristics of the Jungrang river, the biggest tributary of the Han river, was investigated. Significant spatial variations in the hydrochemical characteristics were observed. At JR2 location, concentrations of T-N and T-P were relatively low indicating occurrence of active oxidation in the stepped drop structure. At JR3 location, concentrations of Na, K, Cl, $NH_4-N$ and EC were elevated suggesting increased discharge from the nearby waste-water treatment plant and tributaries. The rain event diluted major dissolved ion concentrations in the river by 12~52%. The $NO_3-N$ levels were preserved during the rain then increased about twofold after rainfall, suggesting increased discharge of nitrate-contaminated groundwater. Heavy metals including Cd, Co, Cr, Cu and Pb were not detected in all water samples and the leachates from surface sediment samples. Concentrations of Fe, Mn, Al and Zn were below the Korean Drinking Water Guideline. Results of this study suggested that establishment of water-quality monitoring protocols describing temporal and spatial variations in parameters sensitive to rainfall events, relatively steady factors, and contaminant sources is required.

• Journal of Communications and Networks
• /
• 제4권2호
• /
• pp.81-89
• /
• 2002

In this paper, we design and implement an efficient fair off-line electronic cash system based on Elliptic Curve Discrete Logarithm Problem (ECDLP), in which the anonymity of coins is revocable by a trustee in case of dispute. To achieve this, we employ the Petersen and Poupard s electronic cash system [1] and extend it by using an elliptic curve over the finite field GF($2^n$). This naturally reduces message size by 85% compared with the original scheme and makes a smart card to store coins easily. Furthermore, we use the Baek et al. s provably secure public key encryption scheme [2] to improve the security of electronic cash system. As an extension, we propose a method to add atomicity into new electronic cash system. To the best of our knowledge, this is the first result to implement a fair off-line electronic cash system based on ECDLP with provable security.

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.

• International Journal of Reliability and Applications
• /
• 제10권1호
• /
• pp.17-32
• /
• 2009

The aim of this work is to generalize reliability equivalence technique to apply it to a system consists of n independent and non-identical components connected in series system, that have mixing constant failure rates. We shall improve the system by using some reliability techniques: (i) reducing some failure rates; (ii) add hot reduncy components; (iii) add cold reduncy components; (iv) add cold reduncy components with imperfect switches. We start by establishing two different types of reliability equivalence factors, the survival equivalence (SRE), and mean reliability equivalence (MRE) factors. Also, we introduced some numerical results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.39-42
• /
• 2000

As gate dimensions continue to shrink below $0.2{\mu}m$, improving CD (Critical Dimension) control has become a major challenge during CMOS process development. Anti-Reflective Coatings are widely used to overcome high substrate reflectivity at Deep UV wavelengths by canceling out these reflections. In this study, we have investigated Batchtype system for PECVO SiOxNy as Anti-Reflective Coatings. The Singletype system was baseline and Batchtype system was new process. The test structure of Singletype is SiON $250{\AA}$ + Cap Oxide $50{\AA}$ and Batchtype is SiON $250{\AA}$ + Cap Oxide $50{\AA}$ or N2O plasma treatment. Inorganic chemical vapor deposition SiOxNy layer has been qualified for bottom ARC on Poly+WSix layer, But, this test was practiced on the actual device structure of TiN/Al-Cu/TiN/Ti stacks. A former day, in Batchtype chamber thin oxide thickness control was difficult. In this test, Batchtype system is consist of six deposition station, and demanded 6th station plasma treatment kits for N2O treatment or Cap Oxide after SiON $250{\AA}$. Good reflectivity can be obtained by Cap Oxide rather than N2O plasma treatment and both system of PECVD SiOxNy ARC have good electrical properties.

• 한국컴퓨터정보학회논문지
• /
• 제25권7호
• /
• pp.103-111
• /
• 2020

성과를 나타내는 지표는 스포츠 성과 향상을 나타내는 기본 요소를 식별하기 위해 개발되었다. 유효한 성과 지표를 식별하려면 성과 분석 시스템 내에서 사용 된 지표가 경기 내에서 성과의 승패를 구별하는 것이 매우 중요하다고 할 수 있다. (Hughes and Bartlett, 2002). 그러나 농구 성과에 관한 연구에서는 제안된 성과와 지표는 코치 및 선수의 상황에 따라 실시간 분석 및 피드백이 사용되지 않고 있다는 점이다. 코치 및 선수에 대한 이러한 실시간 지원은 다른 스포츠에 대한 연구에서도 설명되고 있다. (Choi et al., 2004; O'Donoghue, 2001; Palmer et al., 1997). 실시간 피드백 프로세스 내에서 성과와 손실을 구분하는 관련성과 지표를 식별하는 것이 실시간 분석 시스템 개발의 첫 단계가 되어야 한다. 따라서 이 연구는 10 개의 잉글랜드 내셔널 농구 리그 경기를 분석하는 동안 수집 된 성과 지표 세트 측면에서 팀의 승패와 패배의 차이점을 조사하였다. 승리와 패배 팀은 전체 경기 데이터 (N=10)와 개별 쿼터 (N=40)를 사용하여 비교되었다. 일련의 Wilcoxon Signed Ranks 테스트를 사용하여 전체 경기와 개별 쿼터 내에서 성과를 낸 사람과 잃는 사람을 구별하는 관련성과 지표를 식별하였다. 테스트 결과 3점 (p<0.05)과 어시스트 (p<0.05)는 경기 내 팀의 승패에서 크게 차이가 있다고 할 수 있다. 그러나 2점 슛 (p <0.05), 2점 샷 시도 (P <0.05), 2 점 샷의 백분율 (p <0.05), 3 점 샷 (p <0.05), 수비 리바운드 (p <0.05) ) 및 지원 (p <0.05)은 분기 내 실적의 승패에서 크게 다르게 나타나고 있다. 위와 같은 분석 작업은 성과분석에 따라 코치에게 현재 성과를 설명하는 관련성과 지표를 기반으로 해야 한다. 실시간 분석 및 피드백 시나리오 내에서 가장 최근 분기 내에서 즉각적인 성과를 기반으로 의사 결정을 지원하는 추가 이점이 있다. 결과적으로, 실시간 분석 시스템은 코치의 결정을 뒷받침하기 위해 필요하며 유효성 특성을 갖는 성능 지표를 사용한다.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.318-324
• /
• 2012

Reaction-bonded silicon nitrides containing rare-earth oxide sintering additives were densified by gas pressure sintering. The sintering behavior, microstructure and mechanical properties of the resultant specimens were analyzed. For that purpose, $Lu_2O_3-SiO_2$ (US), $La_2O_3$-MgO (AM) and $Y_2O_3-Al_2O_3$ (YA) additive systems were selected. Among the tested compositions, densification of silicon nitride occurred at the lowest temperature when using the $La_2O_3$-MgO system. Since the $Lu_2O_3-SiO_2$ system has the highest melting temperature, full densification could not be achieved after sintering at $1950^{\circ}C$. However, the system had a reasonably high bending strength of 527 MPa at $1200^{\circ}C$ in air and a high fracture toughness of 9.2 $MPa{\cdot}m^{1/2}$. The $Y_2O_3-Al_2O_3$ system had the highest room temperature bending strength of 1.2 GPa.